1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_37XX_H 8 #define _CONFIG_MVEBU_ARMADA_37XX_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 #define CONFIG_SYS_TEXT_BASE 0x00000000 16 17 /* additions for new ARM relocation support */ 18 #define CONFIG_SYS_SDRAM_BASE 0x00000000 19 20 #define CONFIG_NR_DRAM_BANKS 1 21 22 /* auto boot */ 23 #define CONFIG_PREBOOT 24 25 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 26 115200, 230400, 460800, 921600 } 27 28 /* 29 * For booting Linux, the board info and command line data 30 * have to be in the first 8 MB of memory, since this is 31 * the maximum mapped by the Linux kernel during initialization. 32 */ 33 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 34 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 35 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 36 37 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 38 39 /* 40 * Size of malloc() pool 41 */ 42 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 43 44 /* 45 * Other required minimal configurations 46 */ 47 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 48 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 49 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 50 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 51 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 52 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 53 54 #define CONFIG_SYS_ALT_MEMTEST 55 56 /* End of 16M scrubbed by training in bootrom */ 57 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 58 59 /* 60 * I2C 61 */ 62 #define CONFIG_I2C_MV 63 #define CONFIG_SYS_I2C_SLAVE 0x0 64 65 /* 66 * SPI Flash configuration 67 */ 68 #define CONFIG_ENV_SPI_BUS 0 69 #define CONFIG_ENV_SPI_CS 0 70 71 /* SPI NOR flash default params, used by sf commands */ 72 #define CONFIG_SF_DEFAULT_SPEED 1000000 73 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 74 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 75 76 /* Environment in SPI NOR flash */ 77 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 78 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 79 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 80 81 /* 82 * Ethernet Driver configuration 83 */ 84 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 85 #define CONFIG_ARP_TIMEOUT 200 86 #define CONFIG_NET_RETRY_COUNT 50 87 #define CONFIG_PHY_MARVELL 88 89 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) 90 91 /* USB ethernet */ 92 93 /* 94 * SATA/SCSI/AHCI configuration 95 */ 96 #define CONFIG_SCSI_AHCI_PLAT 97 #define CONFIG_LBA48 98 #define CONFIG_SYS_64BIT_LBA 99 100 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 101 #define CONFIG_SYS_SCSI_MAX_LUN 1 102 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 103 CONFIG_SYS_SCSI_MAX_LUN) 104 105 #define CONFIG_SUPPORT_VFAT 106 107 #include <config_distro_defaults.h> 108 109 #define BOOT_TARGET_DEVICES(func) \ 110 func(MMC, mmc, 1) \ 111 func(MMC, mmc, 0) \ 112 func(USB, usb, 0) \ 113 func(SCSI, scsi, 0) \ 114 func(PXE, pxe, na) \ 115 func(DHCP, dhcp, na) 116 117 #include <config_distro_bootcmd.h> 118 119 #define CONFIG_EXTRA_ENV_SETTINGS \ 120 "scriptaddr=0x4d00000\0" \ 121 "pxefile_addr_r=0x4e00000\0" \ 122 "fdt_addr_r=0x4f00000\0" \ 123 "kernel_addr_r=0x5000000\0" \ 124 "ramdisk_addr_r=0x8000000\0" \ 125 BOOTENV 126 127 #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */ 128