1 /* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_MVEBU_ARMADA_37XX_H 8 #define _CONFIG_MVEBU_ARMADA_37XX_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 #define CONFIG_SYS_TEXT_BASE 0x00000000 16 17 /* additions for new ARM relocation support */ 18 #define CONFIG_SYS_SDRAM_BASE 0x00000000 19 20 #define CONFIG_NR_DRAM_BANKS 1 21 22 /* auto boot */ 23 #define CONFIG_PREBOOT 24 25 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 26 115200, 230400, 460800, 921600 } 27 28 /* 29 * For booting Linux, the board info and command line data 30 * have to be in the first 8 MB of memory, since this is 31 * the maximum mapped by the Linux kernel during initialization. 32 */ 33 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 34 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 35 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 36 37 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 38 39 /* 40 * Size of malloc() pool 41 */ 42 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 43 44 /* 45 * Other required minimal configurations 46 */ 47 #define CONFIG_SYS_LONGHELP 48 #define CONFIG_AUTO_COMPLETE 49 #define CONFIG_CMDLINE_EDITING 50 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 51 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 52 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 53 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 54 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 55 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 56 57 #define CONFIG_SYS_ALT_MEMTEST 58 59 /* End of 16M scrubbed by training in bootrom */ 60 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 61 62 /* 63 * I2C 64 */ 65 #define CONFIG_I2C_MV 66 #define CONFIG_SYS_I2C_SLAVE 0x0 67 68 /* 69 * SPI Flash configuration 70 */ 71 #define CONFIG_ENV_SPI_BUS 0 72 #define CONFIG_ENV_SPI_CS 0 73 74 /* SPI NOR flash default params, used by sf commands */ 75 #define CONFIG_SF_DEFAULT_SPEED 1000000 76 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 77 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 78 79 /* Environment in SPI NOR flash */ 80 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 81 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 82 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 83 84 /* 85 * Ethernet Driver configuration 86 */ 87 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 88 #define CONFIG_ARP_TIMEOUT 200 89 #define CONFIG_NET_RETRY_COUNT 50 90 #define CONFIG_PHY_MARVELL 91 92 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) 93 94 /* USB ethernet */ 95 96 /* 97 * SATA/SCSI/AHCI configuration 98 */ 99 #define CONFIG_SCSI_AHCI_PLAT 100 #define CONFIG_LBA48 101 #define CONFIG_SYS_64BIT_LBA 102 103 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 104 #define CONFIG_SYS_SCSI_MAX_LUN 1 105 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 106 CONFIG_SYS_SCSI_MAX_LUN) 107 108 #define CONFIG_SUPPORT_VFAT 109 110 #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */ 111