1 /*
2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_MVEBU_ARMADA_37XX_H
8 #define _CONFIG_MVEBU_ARMADA_37XX_H
9 
10 /*
11  * High Level Configuration Options (easy to change)
12  */
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
14 
15 #define	CONFIG_SYS_TEXT_BASE	0x00000000
16 
17 /* additions for new ARM relocation support */
18 #define CONFIG_SYS_SDRAM_BASE	0x00000000
19 
20 #define CONFIG_NR_DRAM_BANKS	1
21 
22 /* auto boot */
23 #define CONFIG_PREBOOT
24 
25 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
26 					  115200, 230400, 460800, 921600 }
27 
28 /*
29  * For booting Linux, the board info and command line data
30  * have to be in the first 8 MB of memory, since this is
31  * the maximum mapped by the Linux kernel during initialization.
32  */
33 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
34 #define CONFIG_INITRD_TAG		/* enable INITRD tag */
35 #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
36 
37 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
38 #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
39 		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
40 
41 /*
42  * Size of malloc() pool
43  */
44 #define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */
45 
46 /*
47  * Other required minimal configurations
48  */
49 #define CONFIG_SYS_LONGHELP
50 #define CONFIG_AUTO_COMPLETE
51 #define CONFIG_CMDLINE_EDITING
52 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
53 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
54 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
55 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
56 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
57 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
58 
59 #define CONFIG_SYS_ALT_MEMTEST
60 
61 /* End of 16M scrubbed by training in bootrom */
62 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
63 
64 /*
65  * I2C
66  */
67 #define CONFIG_I2C_MV
68 #define CONFIG_SYS_I2C_SLAVE		0x0
69 
70 /*
71  * SPI Flash configuration
72  */
73 #define CONFIG_ENV_SPI_BUS		0
74 #define CONFIG_ENV_SPI_CS		0
75 
76 /* SPI NOR flash default params, used by sf commands */
77 #define CONFIG_SF_DEFAULT_SPEED		1000000
78 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
79 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
80 
81 /* Environment in SPI NOR flash */
82 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
83 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
84 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
85 
86 /*
87  * Ethernet Driver configuration
88  */
89 #define CONFIG_MVNETA		/* Enable Marvell Gbe Controller Driver */
90 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
91 #define CONFIG_PHY_GIGE		/* GbE speed/duplex detect */
92 #define CONFIG_ARP_TIMEOUT	200
93 #define CONFIG_NET_RETRY_COUNT	50
94 #define CONFIG_PHY_MARVELL
95 
96 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
97 
98 /* USB ethernet */
99 #define CONFIG_USB_HOST_ETHER
100 #define CONFIG_USB_ETHER_ASIX
101 #define CONFIG_USB_ETHER_MCS7830
102 #define CONFIG_USB_ETHER_RTL8152
103 #define CONFIG_USB_ETHER_SMSC95XX
104 
105 /*
106  * SATA/SCSI/AHCI configuration
107  */
108 #define CONFIG_SCSI_AHCI
109 #define CONFIG_SCSI_AHCI_PLAT
110 #define CONFIG_LIBATA
111 #define CONFIG_LBA48
112 #define CONFIG_SYS_64BIT_LBA
113 
114 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
115 #define CONFIG_SYS_SCSI_MAX_LUN		1
116 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
117 					 CONFIG_SYS_SCSI_MAX_LUN)
118 
119 #define CONFIG_SUPPORT_VFAT
120 
121 #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */
122