xref: /openbmc/u-boot/include/configs/mv-common.h (revision cbcbf71b)
1 /*
2  * (C) Copyright 2010
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 /*
10  * This file contains Marvell Board Specific common defincations.
11  * This file should be included in board config header file.
12  *
13  * It supports common definations for Kirkwood platform
14  * TBD: support for Orion5X platforms
15  */
16 
17 #ifndef _MV_COMMON_H
18 #define _MV_COMMON_H
19 
20 /*
21  * High Level Configuration Options (easy to change)
22  */
23 #define CONFIG_MARVELL		1
24 
25 /*
26  * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
27  */
28 #ifndef CONFIG_SYS_TEXT_BASE
29 #define	CONFIG_SYS_TEXT_BASE	0x00600000
30 #endif /* CONFIG_SYS_TEXT_BASE */
31 
32 /* additions for new ARM relocation support */
33 #define CONFIG_SYS_SDRAM_BASE	0x00000000
34 
35 /*
36  * CLKs configurations
37  */
38 
39 /*
40  * NS16550 Configuration
41  */
42 #define CONFIG_SYS_NS16550_SERIAL
43 #define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
44 #if !defined(CONFIG_DM_SERIAL)
45 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
46 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
47 #endif
48 
49 /*
50  * Serial Port configuration
51  * The following definitions let you select what serial you want to use
52  * for your console driver.
53  */
54 
55 #define CONFIG_CONS_INDEX	1	/*Console on UART0 */
56 #define CONFIG_BAUDRATE			115200
57 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
58 					  115200,230400, 460800, 921600 }
59 /* auto boot */
60 #define CONFIG_PREBOOT
61 
62 /*
63  * For booting Linux, the board info and command line data
64  * have to be in the first 8 MB of memory, since this is
65  * the maximum mapped by the Linux kernel during initialization.
66  */
67 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
68 #define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
69 #define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
70 
71 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
72 #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
73 		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
74 
75 /*
76  * Size of malloc() pool
77  */
78 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024 * 4) /* 4MiB for malloc() */
79 
80 /*
81  * Other required minimal configurations
82  */
83 #define CONFIG_SYS_LONGHELP
84 #define CONFIG_AUTO_COMPLETE
85 #define CONFIG_CMDLINE_EDITING
86 #define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
87 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
88 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
89 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
90 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
91 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
92 
93 /* ====> Include platform Common Definitions */
94 #include <asm/arch/config.h>
95 
96 /*
97  * DRAM Banks configuration, Custom config can be done in <board>.h
98  */
99 #ifndef CONFIG_NR_DRAM_BANKS
100 #define CONFIG_NR_DRAM_BANKS	CONFIG_NR_DRAM_BANKS_MAX
101 #else
102 #if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
103 #error CONFIG_NR_DRAM_BANKS Configurated more than available
104 #endif
105 #endif /* CONFIG_NR_DRAM_BANKS */
106 
107 /* ====> Include driver Common Definitions */
108 /*
109  * Common NAND configuration
110  */
111 #ifdef CONFIG_CMD_NAND
112 #define CONFIG_SYS_MAX_NAND_DEVICE     1
113 #endif
114 
115 /*
116  * Common SPI Flash configuration
117  */
118 #ifdef CONFIG_CMD_SF
119 #endif
120 
121 /*
122  * Common USB/EHCI configuration
123  */
124 #if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
125 #define CONFIG_USB_EHCI		/* Enable EHCI USB support */
126 #define CONFIG_DOS_PARTITION
127 #define CONFIG_ISO_PARTITION
128 #define CONFIG_SUPPORT_VFAT
129 #endif /* CONFIG_CMD_USB */
130 
131 /*
132  * File system
133  */
134 #ifdef CONFIG_SYS_MVFS
135 #define CONFIG_CMD_JFFS2
136 #define CONFIG_CMD_UBIFS
137 #define CONFIG_RBTREE
138 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
139 #define CONFIG_MTD_PARTITIONS
140 #define CONFIG_CMD_MTDPARTS
141 #define CONFIG_LZO
142 #endif
143 
144 #endif /* _MV_COMMON_H */
145