1 /* 2 * (C) Copyright 2010 3 * Marvell Semiconductor <www.marvell.com> 4 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 /* 10 * This file contains Marvell Board Specific common defincations. 11 * This file should be included in board config header file. 12 * 13 * It supports common definations for Kirkwood platform 14 * TBD: support for Orion5X platforms 15 */ 16 17 #ifndef _MV_COMMON_H 18 #define _MV_COMMON_H 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_MARVELL 1 24 25 /* 26 * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h 27 */ 28 #ifndef CONFIG_SYS_TEXT_BASE 29 #define CONFIG_SYS_TEXT_BASE 0x00600000 30 #endif /* CONFIG_SYS_TEXT_BASE */ 31 32 /* additions for new ARM relocation support */ 33 #define CONFIG_SYS_SDRAM_BASE 0x00000000 34 35 /* 36 * CLKs configurations 37 */ 38 39 /* 40 * NS16550 Configuration 41 */ 42 #define CONFIG_SYS_NS16550 43 #define CONFIG_SYS_NS16550_SERIAL 44 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 45 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK 46 #define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE 47 48 /* 49 * Serial Port configuration 50 * The following definitions let you select what serial you want to use 51 * for your console driver. 52 */ 53 54 #define CONFIG_CONS_INDEX 1 /*Console on UART0 */ 55 #define CONFIG_BAUDRATE 115200 56 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 57 115200,230400, 460800, 921600 } 58 /* auto boot */ 59 #define CONFIG_BOOTDELAY 3 /* default enable autoboot */ 60 #define CONFIG_PREBOOT 61 62 /* 63 * For booting Linux, the board info and command line data 64 * have to be in the first 8 MB of memory, since this is 65 * the maximum mapped by the Linux kernel during initialization. 66 */ 67 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 68 #define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ 69 #define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ 70 71 #define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ 72 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 73 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 74 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ 75 76 /* 77 * Size of malloc() pool 78 */ 79 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */ 80 81 /* 82 * Other required minimal configurations 83 */ 84 #define CONFIG_SYS_LONGHELP 85 #define CONFIG_AUTO_COMPLETE 86 #define CONFIG_CMDLINE_EDITING 87 #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ 88 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 89 #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ 90 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ 91 #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ 92 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 93 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 94 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 95 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 96 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 97 98 /* ====> Include platform Common Definitions */ 99 #include <asm/arch/config.h> 100 101 /* 102 * DRAM Banks configuration, Custom config can be done in <board>.h 103 */ 104 #ifndef CONFIG_NR_DRAM_BANKS 105 #define CONFIG_NR_DRAM_BANKS CONFIG_NR_DRAM_BANKS_MAX 106 #else 107 #if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX) 108 #error CONFIG_NR_DRAM_BANKS Configurated more than available 109 #endif 110 #endif /* CONFIG_NR_DRAM_BANKS */ 111 112 /* ====> Include driver Common Definitions */ 113 /* 114 * Common NAND configuration 115 */ 116 #ifdef CONFIG_CMD_NAND 117 #define CONFIG_SYS_MAX_NAND_DEVICE 1 118 #endif 119 120 /* 121 * Common SPI Flash configuration 122 */ 123 #ifdef CONFIG_CMD_SF 124 #define CONFIG_SPI_FLASH 1 125 #define CONFIG_SPI_FLASH_MACRONIX 1 126 #endif 127 128 /* 129 * Common USB/EHCI configuration 130 */ 131 #ifdef CONFIG_CMD_USB 132 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 133 #define CONFIG_USB_STORAGE 134 #define CONFIG_DOS_PARTITION 135 #define CONFIG_ISO_PARTITION 136 #define CONFIG_SUPPORT_VFAT 137 #endif /* CONFIG_CMD_USB */ 138 139 /* 140 * File system 141 */ 142 #ifdef CONFIG_SYS_MVFS 143 #define CONFIG_CMD_EXT2 144 #define CONFIG_CMD_JFFS2 145 #define CONFIG_CMD_FAT 146 #define CONFIG_CMD_UBI 147 #define CONFIG_CMD_UBIFS 148 #define CONFIG_RBTREE 149 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 150 #define CONFIG_MTD_PARTITIONS 151 #define CONFIG_CMD_MTDPARTS 152 #define CONFIG_LZO 153 #endif 154 155 #endif /* _MV_COMMON_H */ 156