1 /* 2 * Configuation settings for the Hitachi Solution Engine 7722 3 * 4 * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __MS7722SE_H 10 #define __MS7722SE_H 11 12 #define CONFIG_CPU_SH7722 1 13 #define CONFIG_MS7722SE 1 14 15 #define CONFIG_CMD_FLASH 16 #define CONFIG_CMD_JFFS2 17 #define CONFIG_CMD_NET 18 #define CONFIG_CMD_NFS 19 #define CONFIG_CMD_PING 20 #define CONFIG_CMD_SDRAM 21 #define CONFIG_CMD_MEMORY 22 #define CONFIG_CMD_SAVEENV 23 24 #define CONFIG_BAUDRATE 115200 25 #define CONFIG_BOOTDELAY 3 26 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" 27 28 #define CONFIG_VERSION_VARIABLE 29 #undef CONFIG_SHOW_BOOT_PROGRESS 30 31 /* SMC9111 */ 32 #define CONFIG_SMC91111 33 #define CONFIG_SMC91111_BASE (0xB8000000) 34 35 /* MEMORY */ 36 #define MS7722SE_SDRAM_BASE (0x8C000000) 37 #define MS7722SE_FLASH_BASE_1 (0xA0000000) 38 #define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024) 39 40 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 41 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 42 #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 43 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 44 #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 45 #define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ 46 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ 47 48 /* SCIF */ 49 #define CONFIG_SCIF_CONSOLE 1 50 #define CONFIG_CONS_SCIF0 1 51 #undef CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */ 52 #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 53 #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE 54 55 #define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE) 56 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 57 58 #undef CONFIG_SYS_ALT_MEMTEST /* Enable alternate, more extensive, memory test */ 59 #undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ 60 61 #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ 62 63 #define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE) 64 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ 65 66 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ 67 68 #define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image 69 in Flash (NOT run time address in SDRAM) ?!? */ 70 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */ 71 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ 72 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 73 74 /* FLASH */ 75 #define CONFIG_SYS_FLASH_CFI 76 #define CONFIG_FLASH_CFI_DRIVER 77 #undef CONFIG_SYS_FLASH_QUIET_TEST 78 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 79 80 #define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ 81 82 #define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each 83 Flash chip */ 84 85 /* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */ 86 #define CONFIG_SYS_MAX_FLASH_BANKS 2 87 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ 88 CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ 89 } 90 91 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ 92 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ 93 #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ 94 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ 95 96 #undef CONFIG_SYS_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */ 97 98 #undef CONFIG_SYS_DIRECT_FLASH_TFTP 99 100 #define CONFIG_ENV_IS_IN_FLASH 101 #define CONFIG_ENV_OVERWRITE 1 102 #define CONFIG_ENV_SECT_SIZE (8 * 1024) 103 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 104 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) 105 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 106 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 107 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 108 109 /* Board Clock */ 110 #define CONFIG_SYS_CLK_FREQ 33333333 111 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 112 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 113 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ 114 115 #endif /* __MS7722SE_H */ 116