xref: /openbmc/u-boot/include/configs/ms7720se.h (revision dd1033e4)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuation settings for the Hitachi Solution Engine 7720
4  *
5  * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6  */
7 
8 #ifndef __MS7720SE_H
9 #define __MS7720SE_H
10 
11 #define CONFIG_CPU_SH7720	1
12 
13 #define CONFIG_BOOTFILE		"/boot/zImage"
14 #define CONFIG_LOADADDR		0x8E000000
15 
16 #define CONFIG_DISPLAY_BOARDINFO
17 #undef  CONFIG_SHOW_BOOT_PROGRESS
18 
19 /* MEMORY */
20 #define MS7720SE_SDRAM_BASE		0x8C000000
21 #define MS7720SE_FLASH_BASE_1		0xA0000000
22 #define MS7720SE_FLASH_BANK_SIZE	(8 * 1024 * 1024)
23 
24 #define CONFIG_SYS_PBSIZE	256	/* Buffer size for Console output */
25 /* List of legal baudrate settings for this board */
26 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
27 
28 /* SCIF */
29 #define CONFIG_CONS_SCIF0	1
30 
31 #define CONFIG_SYS_MEMTEST_START	MS7720SE_SDRAM_BASE
32 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
33 
34 #define CONFIG_SYS_SDRAM_BASE		MS7720SE_SDRAM_BASE
35 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
36 
37 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
38 #define CONFIG_SYS_MONITOR_BASE	MS7720SE_FLASH_BASE_1
39 #define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
40 #define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
41 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
42 
43 /* FLASH */
44 #undef  CONFIG_SYS_FLASH_QUIET_TEST
45 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
46 
47 #define CONFIG_SYS_FLASH_BASE		MS7720SE_FLASH_BASE_1
48 
49 #define CONFIG_SYS_MAX_FLASH_SECT	150
50 #define CONFIG_SYS_MAX_FLASH_BANKS	1
51 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
52 
53 #define CONFIG_ENV_SECT_SIZE	(64 * 1024)
54 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
55 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
56 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000
57 #define CONFIG_SYS_FLASH_WRITE_TOUT	500
58 
59 /* Board Clock */
60 #define CONFIG_SYS_CLK_FREQ	33333333
61 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
62 
63 /* PCMCIA */
64 #define CONFIG_IDE_PCMCIA	1
65 #define CONFIG_MARUBUN_PCCARD	1
66 #define CONFIG_PCMCIA_SLOT_A	1
67 #define CONFIG_SYS_IDE_MAXDEVICE	1
68 #define CONFIG_SYS_MARUBUN_MRSHPC	0xb83fffe0
69 #define CONFIG_SYS_MARUBUN_MW1		0xb8400000
70 #define CONFIG_SYS_MARUBUN_MW2		0xb8500000
71 #define CONFIG_SYS_MARUBUN_IO		0xb8600000
72 
73 #define CONFIG_SYS_PIO_MODE		1
74 #define CONFIG_SYS_IDE_MAXBUS		1
75 #define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_MARUBUN_IO	/* base address */
76 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
77 #define CONFIG_SYS_ATA_DATA_OFFSET	0		/* data reg offset */
78 #define CONFIG_SYS_ATA_REG_OFFSET	0		/* reg offset */
79 #define CONFIG_SYS_ATA_ALT_OFFSET	0x200		/* alternate register offset */
80 #define CONFIG_IDE_SWAP_IO
81 
82 #endif	/* __MS7720SE_H */
83