xref: /openbmc/u-boot/include/configs/ms7720se.h (revision 5eb35220)
1 /*
2  * Configuation settings for the Hitachi Solution Engine 7720
3  *
4  * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MS7720SE_H
10 #define __MS7720SE_H
11 
12 #define CONFIG_CPU_SH7720	1
13 #define CONFIG_MS7720SE		1
14 
15 #define CONFIG_BOOTFILE		"/boot/zImage"
16 #define CONFIG_LOADADDR		0x8E000000
17 
18 #define CONFIG_DISPLAY_BOARDINFO
19 #undef  CONFIG_SHOW_BOOT_PROGRESS
20 
21 /* MEMORY */
22 #define MS7720SE_SDRAM_BASE		0x8C000000
23 #define MS7720SE_FLASH_BASE_1		0xA0000000
24 #define MS7720SE_FLASH_BANK_SIZE	(8 * 1024 * 1024)
25 
26 #define CONFIG_SYS_TEXT_BASE	0x8FFC0000
27 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
28 #define CONFIG_SYS_PBSIZE	256	/* Buffer size for Console output */
29 /* List of legal baudrate settings for this board */
30 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
31 
32 /* SCIF */
33 #define CONFIG_CONS_SCIF0	1
34 
35 #define CONFIG_SYS_MEMTEST_START	MS7720SE_SDRAM_BASE
36 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
37 
38 #define CONFIG_SYS_SDRAM_BASE		MS7720SE_SDRAM_BASE
39 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
40 
41 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
42 #define CONFIG_SYS_MONITOR_BASE	MS7720SE_FLASH_BASE_1
43 #define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
44 #define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
45 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
46 
47 /* FLASH */
48 #define CONFIG_SYS_FLASH_CFI
49 #define CONFIG_FLASH_CFI_DRIVER
50 #undef  CONFIG_SYS_FLASH_QUIET_TEST
51 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
52 
53 #define CONFIG_SYS_FLASH_BASE		MS7720SE_FLASH_BASE_1
54 
55 #define CONFIG_SYS_MAX_FLASH_SECT	150
56 #define CONFIG_SYS_MAX_FLASH_BANKS	1
57 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
58 
59 #define CONFIG_ENV_SECT_SIZE	(64 * 1024)
60 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
61 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
62 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000
63 #define CONFIG_SYS_FLASH_WRITE_TOUT	500
64 
65 /* Board Clock */
66 #define CONFIG_SYS_CLK_FREQ	33333333
67 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
68 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
69 #define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
70 
71 /* PCMCIA */
72 #define CONFIG_IDE_PCMCIA	1
73 #define CONFIG_MARUBUN_PCCARD	1
74 #define CONFIG_PCMCIA_SLOT_A	1
75 #define CONFIG_SYS_IDE_MAXDEVICE	1
76 #define CONFIG_SYS_MARUBUN_MRSHPC	0xb83fffe0
77 #define CONFIG_SYS_MARUBUN_MW1		0xb8400000
78 #define CONFIG_SYS_MARUBUN_MW2		0xb8500000
79 #define CONFIG_SYS_MARUBUN_IO		0xb8600000
80 
81 #define CONFIG_SYS_PIO_MODE		1
82 #define CONFIG_SYS_IDE_MAXBUS		1
83 #define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_MARUBUN_IO	/* base address */
84 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
85 #define CONFIG_SYS_ATA_DATA_OFFSET	0		/* data reg offset */
86 #define CONFIG_SYS_ATA_REG_OFFSET	0		/* reg offset */
87 #define CONFIG_SYS_ATA_ALT_OFFSET	0x200		/* alternate register offset */
88 #define CONFIG_IDE_SWAP_IO
89 
90 #endif	/* __MS7720SE_H */
91