1 /* 2 * (C) Copyright 2007-2010 Michal Simek 3 * 4 * Michal SIMEK <monstr@monstr.eu> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 #include "../board/xilinx/microblaze-generic/xparameters.h" 29 30 /* MicroBlaze CPU */ 31 #define CONFIG_MICROBLAZE 1 32 #define MICROBLAZE_V5 1 33 34 /* Open Firmware DTS */ 35 #define CONFIG_OF_CONTROL 1 36 #define CONFIG_OF_EMBED 1 37 #define CONFIG_DEFAULT_DEVICE_TREE microblaze 38 39 /* linear and spi flash memory */ 40 #ifdef XILINX_FLASH_START 41 #define FLASH 42 #undef SPIFLASH 43 #undef RAMENV /* hold environment in flash */ 44 #else 45 #ifdef XILINX_SPI_FLASH_BASEADDR 46 #undef FLASH 47 #define SPIFLASH 48 #undef RAMENV /* hold environment in flash */ 49 #else 50 #undef FLASH 51 #undef SPIFLASH 52 #define RAMENV /* hold environment in RAM */ 53 #endif 54 #endif 55 56 /* uart */ 57 #ifdef XILINX_UARTLITE_BASEADDR 58 # define CONFIG_XILINX_UARTLITE 59 # define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR 60 # define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE 61 # define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } 62 # define CONSOLE_ARG "console=console=ttyUL0,115200\0" 63 #elif XILINX_UART16550_BASEADDR 64 # define CONFIG_SYS_NS16550 1 65 # define CONFIG_SYS_NS16550_SERIAL 66 # if defined(__MICROBLAZEEL__) 67 # define CONFIG_SYS_NS16550_REG_SIZE -4 68 # else 69 # define CONFIG_SYS_NS16550_REG_SIZE 4 70 # endif 71 # define CONFIG_CONS_INDEX 1 72 # define CONFIG_SYS_NS16550_COM1 \ 73 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) 74 # define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ 75 # define CONFIG_BAUDRATE 115200 76 77 /* The following table includes the supported baudrates */ 78 # define CONFIG_SYS_BAUDRATE_TABLE \ 79 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} 80 # define CONSOLE_ARG "console=console=ttyS0,115200\0" 81 #else 82 # error Undefined uart 83 #endif 84 85 /* setting reset address */ 86 /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ 87 88 /* ethernet */ 89 #undef CONFIG_SYS_ENET 90 #if defined(XILINX_EMACLITE_BASEADDR) 91 # define CONFIG_XILINX_EMACLITE 1 92 # define CONFIG_SYS_ENET 93 #endif 94 #if defined(XILINX_LLTEMAC_BASEADDR) 95 # define CONFIG_XILINX_LL_TEMAC 1 96 # define CONFIG_SYS_ENET 97 #endif 98 #if defined(XILINX_AXIEMAC_BASEADDR) 99 # define CONFIG_XILINX_AXIEMAC 1 100 # define CONFIG_SYS_ENET 101 #endif 102 103 #undef ET_DEBUG 104 105 /* gpio */ 106 #ifdef XILINX_GPIO_BASEADDR 107 # define CONFIG_SYS_GPIO_0 1 108 # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR 109 #endif 110 111 /* interrupt controller */ 112 #ifdef XILINX_INTC_BASEADDR 113 # define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR 114 # define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS 115 #endif 116 117 /* timer */ 118 #if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) 119 # define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR 120 # define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ 121 #endif 122 123 /* FSL */ 124 /* #define CONFIG_SYS_FSL_2 */ 125 /* #define FSL_INTR_2 1 */ 126 127 /* 128 * memory layout - Example 129 * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk 130 * CONFIG_SYS_SRAM_BASE = 0x1000_0000; 131 * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB 132 * 133 * CONFIG_SYS_MONITOR_LEN = 0x40000 134 * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000 135 * 136 * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 137 * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000 138 * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000 139 * 140 * 0x1000_0000 CONFIG_SYS_SDRAM_BASE 141 * MEMTEST_AREA 64kB 142 * FREE 143 * 0x1200_0000 CONFIG_SYS_TEXT_BASE 144 * U-BOOT code 145 * 0x1202_0000 146 * FREE 147 * 148 * STACK 149 * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE 150 * MALLOC_AREA 768kB Alloc 151 * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE 152 * MONITOR_CODE 256kB Env 153 * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET 154 * GLOBAL_DATA 4kB bd, gd 155 * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE 156 */ 157 158 /* ddr sdram - main memory */ 159 #define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START 160 #define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE 161 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 162 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) 163 164 /* global pointer */ 165 /* start of global data */ 166 #define CONFIG_SYS_GBL_DATA_OFFSET \ 167 (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE) 168 169 /* monitor code */ 170 #define SIZE 0x40000 171 #define CONFIG_SYS_MONITOR_LEN SIZE 172 #define CONFIG_SYS_MONITOR_BASE \ 173 (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ 174 - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) 175 #define CONFIG_SYS_MONITOR_END \ 176 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 177 #define CONFIG_SYS_MALLOC_LEN (SIZE * 3) 178 #define CONFIG_SYS_MALLOC_BASE \ 179 (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) 180 181 /* stack */ 182 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE 183 184 /* 185 * CFI flash memory layout - Example 186 * CONFIG_SYS_FLASH_BASE = 0x2200_0000; 187 * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB 188 * 189 * SECT_SIZE = 0x20000; 128kB is one sector 190 * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store 191 * 192 * 0x2200_0000 CONFIG_SYS_FLASH_BASE 193 * FREE 256kB 194 * 0x2204_0000 CONFIG_ENV_ADDR 195 * ENV_AREA 128kB 196 * 0x2206_0000 197 * FREE 198 * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE 199 * 200 */ 201 202 #ifdef FLASH 203 # define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START 204 # define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE 205 # define CONFIG_SYS_FLASH_CFI 1 206 # define CONFIG_FLASH_CFI_DRIVER 1 207 /* ?empty sector */ 208 # define CONFIG_SYS_FLASH_EMPTY_INFO 1 209 /* max number of memory banks */ 210 # define CONFIG_SYS_MAX_FLASH_BANKS 1 211 /* max number of sectors on one chip */ 212 # define CONFIG_SYS_MAX_FLASH_SECT 512 213 /* hardware flash protection */ 214 # define CONFIG_SYS_FLASH_PROTECTION 215 216 # ifdef RAMENV 217 # define CONFIG_ENV_IS_NOWHERE 1 218 # define CONFIG_ENV_SIZE 0x1000 219 # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) 220 221 # else /* FLASH && !RAMENV */ 222 # define CONFIG_ENV_IS_IN_FLASH 1 223 /* 128K(one sector) for env */ 224 # define CONFIG_ENV_SECT_SIZE 0x20000 225 # define CONFIG_ENV_ADDR \ 226 (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 227 # define CONFIG_ENV_SIZE 0x20000 228 # endif /* FLASH && !RAMBOOT */ 229 #else /* !FLASH */ 230 231 #ifdef SPIFLASH 232 # define CONFIG_SYS_NO_FLASH 1 233 # define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR 234 # define CONFIG_XILINX_SPI 1 235 # define CONFIG_SPI 1 236 # define CONFIG_SPI_FLASH 1 237 # define CONFIG_SPI_FLASH_STMICRO 1 238 # define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 239 # define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ 240 # define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS 241 242 # ifdef RAMENV 243 # define CONFIG_ENV_IS_NOWHERE 1 244 # define CONFIG_ENV_SIZE 0x1000 245 # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) 246 247 # else /* SPIFLASH && !RAMENV */ 248 # define CONFIG_ENV_IS_IN_SPI_FLASH 1 249 # define CONFIG_ENV_SPI_MODE SPI_MODE_3 250 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 251 # define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 252 /* 128K(two sectors) for env */ 253 # define CONFIG_ENV_SECT_SIZE 0x10000 254 # define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) 255 /* Warning: adjust the offset in respect of other flash content and size */ 256 # define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ 257 # endif /* SPIFLASH && !RAMBOOT */ 258 #else /* !SPIFLASH */ 259 260 /* ENV in RAM */ 261 # define CONFIG_SYS_NO_FLASH 1 262 # define CONFIG_ENV_IS_NOWHERE 1 263 # define CONFIG_ENV_SIZE 0x1000 264 # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) 265 #endif /* !SPIFLASH */ 266 #endif /* !FLASH */ 267 268 /* system ace */ 269 #ifdef XILINX_SYSACE_BASEADDR 270 # define CONFIG_SYSTEMACE 271 /* #define DEBUG_SYSTEMACE */ 272 # define SYSTEMACE_CONFIG_FPGA 273 # define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR 274 # define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH 275 # define CONFIG_DOS_PARTITION 276 #endif 277 278 #if defined(XILINX_USE_ICACHE) 279 # define CONFIG_ICACHE 280 #else 281 # undef CONFIG_ICACHE 282 #endif 283 284 #if defined(XILINX_USE_DCACHE) 285 # define CONFIG_DCACHE 286 #else 287 # undef CONFIG_DCACHE 288 #endif 289 290 /* 291 * BOOTP options 292 */ 293 #define CONFIG_BOOTP_BOOTFILESIZE 294 #define CONFIG_BOOTP_BOOTPATH 295 #define CONFIG_BOOTP_GATEWAY 296 #define CONFIG_BOOTP_HOSTNAME 297 298 /* 299 * Command line configuration. 300 */ 301 #include <config_cmd_default.h> 302 303 #define CONFIG_CMD_ASKENV 304 #define CONFIG_CMD_IRQ 305 #define CONFIG_CMD_MFSL 306 #define CONFIG_CMD_ECHO 307 308 #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) 309 # define CONFIG_CMD_CACHE 310 #else 311 # undef CONFIG_CMD_CACHE 312 #endif 313 314 #ifndef CONFIG_SYS_ENET 315 # undef CONFIG_CMD_NET 316 # undef CONFIG_CMD_NFS 317 #else 318 # define CONFIG_CMD_PING 319 # define CONFIG_CMD_DHCP 320 # define CONFIG_CMD_TFTPPUT 321 #endif 322 323 #if defined(CONFIG_SYSTEMACE) 324 # define CONFIG_CMD_EXT2 325 # define CONFIG_CMD_FAT 326 #endif 327 328 #if defined(FLASH) 329 # define CONFIG_CMD_ECHO 330 # define CONFIG_CMD_FLASH 331 # define CONFIG_CMD_IMLS 332 # define CONFIG_CMD_JFFS2 333 # define CONFIG_CMD_UBI 334 # undef CONFIG_CMD_UBIFS 335 336 # if !defined(RAMENV) 337 # define CONFIG_CMD_SAVEENV 338 # define CONFIG_CMD_SAVES 339 # endif 340 341 #else 342 #if defined(SPIFLASH) 343 # define CONFIG_CMD_SF 344 345 # if !defined(RAMENV) 346 # define CONFIG_CMD_SAVEENV 347 # define CONFIG_CMD_SAVES 348 # endif 349 #else 350 # undef CONFIG_CMD_IMLS 351 # undef CONFIG_CMD_FLASH 352 # undef CONFIG_CMD_JFFS2 353 # undef CONFIG_CMD_UBI 354 # undef CONFIG_CMD_UBIFS 355 #endif 356 #endif 357 358 #if defined(CONFIG_CMD_JFFS2) 359 # define CONFIG_MTD_PARTITIONS 360 #endif 361 362 #if defined(CONFIG_CMD_UBIFS) 363 # define CONFIG_CMD_UBI 364 # define CONFIG_LZO 365 #endif 366 367 #if defined(CONFIG_CMD_UBI) 368 # define CONFIG_MTD_PARTITIONS 369 # define CONFIG_RBTREE 370 #endif 371 372 #if defined(CONFIG_MTD_PARTITIONS) 373 /* MTD partitions */ 374 #define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ 375 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 376 #define CONFIG_FLASH_CFI_MTD 377 #define MTDIDS_DEFAULT "nor0=flash-0" 378 379 /* default mtd partition table */ 380 #define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\ 381 "256k(env),3m(kernel),1m(romfs),"\ 382 "1m(cramfs),-(jffs2)" 383 #endif 384 385 /* Miscellaneous configurable options */ 386 #define CONFIG_SYS_PROMPT "U-Boot-mONStR> " 387 /* size of console buffer */ 388 #define CONFIG_SYS_CBSIZE 512 389 /* print buffer size */ 390 #define CONFIG_SYS_PBSIZE \ 391 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 392 /* max number of command args */ 393 #define CONFIG_SYS_MAXARGS 15 394 #define CONFIG_SYS_LONGHELP 395 /* default load address */ 396 #define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START 397 398 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ 399 #define CONFIG_BOOTARGS "root=romfs" 400 #define CONFIG_HOSTNAME XILINX_BOARD_NAME 401 #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" 402 #define CONFIG_IPADDR 192.168.0.3 403 #define CONFIG_SERVERIP 192.168.0.5 404 #define CONFIG_GATEWAYIP 192.168.0.1 405 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 406 407 /* architecture dependent code */ 408 #define CONFIG_SYS_USR_EXCEP /* user exception */ 409 #define CONFIG_SYS_HZ 1000 410 411 #define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" 412 413 #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ 414 "nor0=flash-0\0"\ 415 "mtdparts=mtdparts=flash-0:"\ 416 "256k(u-boot),256k(env),3m(kernel),"\ 417 "1m(romfs),1m(cramfs),-(jffs2)\0" 418 419 #define CONFIG_CMDLINE_EDITING 420 421 /* Use the HUSH parser */ 422 #define CONFIG_SYS_HUSH_PARSER 423 424 /* Enable flat device tree support */ 425 #define CONFIG_LMB 1 426 #define CONFIG_FIT 1 427 #define CONFIG_OF_LIBFDT 1 428 429 #if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC) 430 # define CONFIG_MII 1 431 # define CONFIG_CMD_MII 1 432 # define CONFIG_PHY_GIGE 1 433 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 434 # define CONFIG_PHYLIB 1 435 # define CONFIG_PHY_ATHEROS 1 436 # define CONFIG_PHY_BROADCOM 1 437 # define CONFIG_PHY_DAVICOM 1 438 # define CONFIG_PHY_LXT 1 439 # define CONFIG_PHY_MARVELL 1 440 # define CONFIG_PHY_MICREL 1 441 # define CONFIG_PHY_NATSEMI 1 442 # define CONFIG_PHY_REALTEK 1 443 # define CONFIG_PHY_VITESSE 1 444 #else 445 # undef CONFIG_MII 446 # undef CONFIG_CMD_MII 447 # undef CONFIG_PHYLIB 448 #endif 449 450 #endif /* __CONFIG_H */ 451