1 /* 2 * (C) Copyright 2007-2008 Michal Simek 3 * 4 * Michal SIMEK <monstr@monstr.eu> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 #include "../board/xilinx/microblaze-generic/xparameters.h" 29 30 #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ 31 #define MICROBLAZE_V5 1 32 33 /* uart */ 34 #ifdef XILINX_UARTLITE_BASEADDR 35 #define CONFIG_XILINX_UARTLITE 36 #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR 37 #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE 38 #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } 39 #define CONSOLE_ARG "console=console=ttyUL0,115200\0" 40 #elif XILINX_UART16550_BASEADDR 41 #define CONFIG_SYS_NS16550 1 42 #define CONFIG_SYS_NS16550_SERIAL 43 #define CONFIG_SYS_NS16550_REG_SIZE -4 44 #define CONFIG_CONS_INDEX 1 45 #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) 46 #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ 47 #define CONFIG_BAUDRATE 115200 48 49 /* The following table includes the supported baudrates */ 50 #define CONFIG_SYS_BAUDRATE_TABLE \ 51 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} 52 #define CONSOLE_ARG "console=console=ttyS0,115200\0" 53 #else 54 #error Undefined uart 55 #endif 56 57 /* setting reset address */ 58 /*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/ 59 60 /* ethernet */ 61 #ifdef XILINX_EMAC_BASEADDR 62 #define CONFIG_XILINX_EMAC 1 63 #define CONFIG_SYS_ENET 64 #elif XILINX_EMACLITE_BASEADDR 65 #define CONFIG_XILINX_EMACLITE 1 66 #define CONFIG_SYS_ENET 67 #elif XILINX_LLTEMAC_BASEADDR 68 #define CONFIG_XILINX_LL_TEMAC 1 69 #define CONFIG_SYS_ENET 70 #endif 71 72 #undef ET_DEBUG 73 74 /* gpio */ 75 #ifdef XILINX_GPIO_BASEADDR 76 #define CONFIG_SYS_GPIO_0 1 77 #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR 78 #endif 79 80 /* interrupt controller */ 81 #ifdef XILINX_INTC_BASEADDR 82 #define CONFIG_SYS_INTC_0 1 83 #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR 84 #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS 85 #endif 86 87 /* timer */ 88 #ifdef XILINX_TIMER_BASEADDR 89 #if (XILINX_TIMER_IRQ != -1) 90 #define CONFIG_SYS_TIMER_0 1 91 #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR 92 #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ 93 #define FREQUENCE XILINX_CLOCK_FREQ 94 #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) 95 #endif 96 #elif XILINX_CLOCK_FREQ 97 #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ 98 #else 99 #error BAD CLOCK FREQ 100 #endif 101 /* FSL */ 102 /* #define CONFIG_SYS_FSL_2 */ 103 /* #define FSL_INTR_2 1 */ 104 105 /* 106 * memory layout - Example 107 * TEXT_BASE = 0x1200_0000; 108 * CONFIG_SYS_SRAM_BASE = 0x1000_0000; 109 * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 110 * 111 * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 112 * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 113 * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 114 * 115 * 0x1000_0000 CONFIG_SYS_SDRAM_BASE 116 * FREE 117 * 0x1200_0000 TEXT_BASE 118 * U-BOOT code 119 * 0x1202_0000 120 * FREE 121 * 122 * STACK 123 * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE 124 * MALLOC_AREA 256kB Alloc 125 * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE 126 * MONITOR_CODE 256kB Env 127 * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET 128 * GLOBAL_DATA 4kB bd, gd 129 * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE 130 */ 131 132 /* ddr sdram - main memory */ 133 #define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START 134 #define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE 135 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 136 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) 137 138 /* global pointer */ 139 #define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ 140 /* start of global data */ 141 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) 142 143 /* monitor code */ 144 #define SIZE 0x40000 145 #define CONFIG_SYS_MONITOR_LEN SIZE 146 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) 147 #define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 148 #define CONFIG_SYS_MALLOC_LEN SIZE 149 #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) 150 151 /* stack */ 152 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MONITOR_BASE 153 154 /*#define RAMENV */ 155 #define FLASH 156 157 #ifdef FLASH 158 #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START 159 #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE 160 #define CONFIG_SYS_FLASH_CFI 1 161 #define CONFIG_FLASH_CFI_DRIVER 1 162 #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ 163 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 164 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 165 #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ 166 167 #ifdef RAMENV 168 #define CONFIG_ENV_IS_NOWHERE 1 169 #define CONFIG_ENV_SIZE 0x1000 170 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) 171 172 #else /* !RAMENV */ 173 #define CONFIG_ENV_IS_IN_FLASH 1 174 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 175 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 176 #define CONFIG_ENV_SIZE 0x20000 177 #endif /* !RAMBOOT */ 178 #else /* !FLASH */ 179 /* ENV in RAM */ 180 #define CONFIG_SYS_NO_FLASH 1 181 #define CONFIG_ENV_IS_NOWHERE 1 182 #define CONFIG_ENV_SIZE 0x1000 183 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) 184 #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ 185 #endif /* !FLASH */ 186 187 /* system ace */ 188 #ifdef XILINX_SYSACE_BASEADDR 189 #define CONFIG_SYSTEMACE 190 /* #define DEBUG_SYSTEMACE */ 191 #define SYSTEMACE_CONFIG_FPGA 192 #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR 193 #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH 194 #define CONFIG_DOS_PARTITION 195 #endif 196 197 #if defined(XILINX_USE_ICACHE) 198 #define CONFIG_ICACHE 199 #else 200 #undef CONFIG_ICACHE 201 #endif 202 203 #if defined(XILINX_USE_DCACHE) 204 #define CONFIG_DCACHE 205 #else 206 #undef CONFIG_DCACHE 207 #endif 208 209 /* 210 * BOOTP options 211 */ 212 #define CONFIG_BOOTP_BOOTFILESIZE 213 #define CONFIG_BOOTP_BOOTPATH 214 #define CONFIG_BOOTP_GATEWAY 215 #define CONFIG_BOOTP_HOSTNAME 216 217 /* 218 * Command line configuration. 219 */ 220 #include <config_cmd_default.h> 221 222 #define CONFIG_CMD_ASKENV 223 #define CONFIG_CMD_IRQ 224 #define CONFIG_CMD_MFSL 225 #define CONFIG_CMD_ECHO 226 227 #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) 228 #define CONFIG_CMD_CACHE 229 #else 230 #undef CONFIG_CMD_CACHE 231 #endif 232 233 #ifndef CONFIG_SYS_ENET 234 #undef CONFIG_CMD_NET 235 #else 236 #define CONFIG_CMD_PING 237 #endif 238 239 #if defined(CONFIG_SYSTEMACE) 240 #define CONFIG_CMD_EXT2 241 #define CONFIG_CMD_FAT 242 #endif 243 244 #if defined(FLASH) 245 #define CONFIG_CMD_ECHO 246 #define CONFIG_CMD_FLASH 247 #define CONFIG_CMD_IMLS 248 #define CONFIG_CMD_JFFS2 249 250 #if !defined(RAMENV) 251 #define CONFIG_CMD_SAVEENV 252 #define CONFIG_CMD_SAVES 253 #endif 254 #else 255 #undef CONFIG_CMD_IMLS 256 #undef CONFIG_CMD_FLASH 257 #undef CONFIG_CMD_JFFS2 258 #endif 259 260 #if defined(CONFIG_CMD_JFFS2) 261 /* JFFS2 partitions */ 262 #define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ 263 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 264 #define CONFIG_FLASH_CFI_MTD 265 #define MTDIDS_DEFAULT "nor0=ml401-0" 266 267 /* default mtd partition table */ 268 #define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ 269 "256k(env),3m(kernel),1m(romfs),"\ 270 "1m(cramfs),-(jffs2)" 271 #endif 272 273 /* Miscellaneous configurable options */ 274 #define CONFIG_SYS_PROMPT "U-Boot-mONStR> " 275 #define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ 276 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ 277 #define CONFIG_SYS_MAXARGS 15 /* max number of command args */ 278 #define CONFIG_SYS_LONGHELP 279 #define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */ 280 281 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ 282 #define CONFIG_BOOTARGS "root=romfs" 283 #define CONFIG_HOSTNAME XILINX_BOARD_NAME 284 #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" 285 #define CONFIG_IPADDR 192.168.0.3 286 #define CONFIG_SERVERIP 192.168.0.5 287 #define CONFIG_GATEWAYIP 192.168.0.1 288 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 289 290 /* architecture dependent code */ 291 #define CONFIG_SYS_USR_EXCEP /* user exception */ 292 #define CONFIG_SYS_HZ 1000 293 294 #define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo" 295 296 #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ 297 "nor0=ml401-0\0"\ 298 "mtdparts=mtdparts=ml401-0:"\ 299 "256k(u-boot),256k(env),3m(kernel),"\ 300 "1m(romfs),1m(cramfs),-(jffs2)\0" 301 302 #define CONFIG_CMDLINE_EDITING 303 304 #endif /* __CONFIG_H */ 305