1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2007-2010 Michal Simek
4  *
5  * Michal SIMEK <monstr@monstr.eu>
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include "../board/xilinx/microblaze-generic/xparameters.h"
12 
13 /* MicroBlaze CPU */
14 #define	MICROBLAZE_V5		1
15 
16 /* linear and spi flash memory */
17 #ifdef XILINX_FLASH_START
18 #define	FLASH
19 #undef	SPIFLASH
20 #undef	RAMENV	/* hold environment in flash */
21 #else
22 #undef	FLASH
23 #undef	SPIFLASH
24 #define	RAMENV	/* hold environment in RAM */
25 #endif
26 
27 /* uart */
28 /* The following table includes the supported baudrates */
29 # define CONFIG_SYS_BAUDRATE_TABLE \
30 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
31 
32 /* setting reset address */
33 /*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
34 
35 #define CONFIG_SYS_MALLOC_LEN	0xC0000
36 
37 /* Stack location before relocation */
38 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
39 					 CONFIG_SYS_MALLOC_F_LEN)
40 
41 /*
42  * CFI flash memory layout - Example
43  * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
44  * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
45  *
46  * SECT_SIZE = 0x20000;			128kB is one sector
47  * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
48  *
49  * 0x2200_0000	CONFIG_SYS_FLASH_BASE
50  *					FREE		256kB
51  * 0x2204_0000	CONFIG_ENV_ADDR
52  *					ENV_AREA	128kB
53  * 0x2206_0000
54  *					FREE
55  * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
56  *
57  */
58 
59 #ifdef FLASH
60 # define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
61 # define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
62 # define CONFIG_SYS_FLASH_CFI		1
63 # define CONFIG_FLASH_CFI_DRIVER	1
64 /* ?empty sector */
65 # define CONFIG_SYS_FLASH_EMPTY_INFO	1
66 /* max number of memory banks */
67 # define CONFIG_SYS_MAX_FLASH_BANKS	1
68 /* max number of sectors on one chip */
69 # define CONFIG_SYS_MAX_FLASH_SECT	512
70 /* hardware flash protection */
71 # define CONFIG_SYS_FLASH_PROTECTION
72 /* use buffered writes (20x faster) */
73 # define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
74 # ifdef	RAMENV
75 #  define CONFIG_ENV_SIZE	0x1000
76 #  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
77 
78 # else	/* FLASH && !RAMENV */
79 /* 128K(one sector) for env */
80 #  define CONFIG_ENV_SECT_SIZE	0x20000
81 #  define CONFIG_ENV_ADDR \
82 			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
83 #  define CONFIG_ENV_SIZE	0x20000
84 # endif /* FLASH && !RAMBOOT */
85 #else /* !FLASH */
86 
87 #ifdef SPIFLASH
88 # define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
89 # define CONFIG_SF_DEFAULT_SPEED	XILINX_SPI_FLASH_MAX_FREQ
90 # define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
91 
92 # ifdef	RAMENV
93 #  define CONFIG_ENV_SIZE	0x1000
94 #  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
95 
96 # else	/* SPIFLASH && !RAMENV */
97 #  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
98 #  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
99 #  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
100 /* 128K(two sectors) for env */
101 #  define CONFIG_ENV_SECT_SIZE	0x10000
102 #  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
103 /* Warning: adjust the offset in respect of other flash content and size */
104 #  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
105 # endif /* SPIFLASH && !RAMBOOT */
106 #else /* !SPIFLASH */
107 
108 /* ENV in RAM */
109 # define CONFIG_ENV_SIZE	0x1000
110 # define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
111 #endif /* !SPIFLASH */
112 #endif /* !FLASH */
113 
114 #if defined(XILINX_USE_ICACHE)
115 # define CONFIG_ICACHE
116 #else
117 # undef CONFIG_ICACHE
118 #endif
119 
120 #if defined(XILINX_USE_DCACHE)
121 # define CONFIG_DCACHE
122 #else
123 # undef CONFIG_DCACHE
124 #endif
125 
126 #ifndef XILINX_DCACHE_BYTE_SIZE
127 #define XILINX_DCACHE_BYTE_SIZE	32768
128 #endif
129 
130 /*
131  * BOOTP options
132  */
133 #define CONFIG_BOOTP_BOOTFILESIZE
134 
135 #if defined(CONFIG_MTD_PARTITIONS)
136 /* MTD partitions */
137 #define CONFIG_FLASH_CFI_MTD
138 
139 /* default mtd partition table */
140 #endif
141 
142 /* size of console buffer */
143 #define	CONFIG_SYS_CBSIZE	512
144 /* max number of command args */
145 #define	CONFIG_SYS_MAXARGS	15
146 /* default load address */
147 #define	CONFIG_SYS_LOAD_ADDR	0
148 
149 #define	CONFIG_HOSTNAME		"microblaze-generic"
150 #define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
151 
152 /* architecture dependent code */
153 #define	CONFIG_SYS_USR_EXCEP	/* user exception */
154 
155 #define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
156 
157 #ifndef CONFIG_EXTRA_ENV_SETTINGS
158 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" \
159 					"nor0=flash-0\0"\
160 					"mtdparts=mtdparts=flash-0:"\
161 					"256k(u-boot),256k(env),3m(kernel),"\
162 					"1m(romfs),1m(cramfs),-(jffs2)\0"\
163 					"nc=setenv stdout nc;"\
164 					"setenv stdin nc\0" \
165 					"serial=setenv stdout serial;"\
166 					"setenv stdin serial\0"
167 #endif
168 
169 /* Enable flat device tree support */
170 #define CONFIG_LMB		1
171 
172 #if defined(CONFIG_XILINX_AXIEMAC)
173 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
174 #endif
175 
176 /* SPL part */
177 
178 #ifdef CONFIG_SYS_FLASH_BASE
179 # define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
180 #endif
181 
182 /* for booting directly linux */
183 
184 #define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
185 					 0x40000)
186 #define CONFIG_SYS_FDT_SIZE		(16 << 10)
187 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
188 					 0x1000000)
189 
190 /* SP location before relocation, must use scratch RAM */
191 /* BRAM start */
192 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
193 /* BRAM size - will be generated */
194 #define CONFIG_SYS_INIT_RAM_SIZE	0x100000
195 
196 # define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
197 					 CONFIG_SYS_INIT_RAM_SIZE - \
198 					 CONFIG_SYS_MALLOC_F_LEN)
199 
200 /* Just for sure that there is a space for stack */
201 #define CONFIG_SPL_STACK_SIZE		0x100
202 
203 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
204 
205 #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
206 					 CONFIG_SYS_INIT_RAM_ADDR - \
207 					 CONFIG_SYS_MALLOC_F_LEN - \
208 					 CONFIG_SPL_STACK_SIZE)
209 
210 #endif	/* __CONFIG_H */
211