1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * (C) Copyright 2009-2015 7 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> 8 * esd electronic system design gmbh <www.esd.eu> 9 * 10 * Configuation settings for the esd MEESC board. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* 19 * SoC must be defined first, before hardware.h is included. 20 * In this case SoC is defined in boards.cfg. 21 */ 22 #include <asm/hardware.h> 23 24 /* 25 * Warning: changing CONFIG_SYS_TEXT_BASE requires 26 * adapting the initial boot program. 27 * Since the linker has to swallow that define, we must use a pure 28 * hex number here! 29 */ 30 #define CONFIG_SYS_TEXT_BASE 0x21F00000 31 32 /* 33 * since a number of boards are not being listed in linux 34 * arch/arm/tools/mach-types any more, the mach-types have to be 35 * defined here 36 */ 37 #define MACH_TYPE_MEESC 2165 38 #define MACH_TYPE_ETHERCAN2 2407 39 40 /* ARM asynchronous clock */ 41 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ 42 #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ 43 44 /* Misc CPU related */ 45 #define CONFIG_SKIP_LOWLEVEL_INIT 46 #define CONFIG_ARCH_CPU_INIT 47 #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ 48 #define CONFIG_SETUP_MEMORY_TAGS 49 #define CONFIG_INITRD_TAG 50 #define CONFIG_SERIAL_TAG 51 #define CONFIG_REVISION_TAG 52 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 53 #define CONFIG_MISC_INIT_R /* Call misc_init_r */ 54 55 #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ 56 #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ 57 #define CONFIG_PREBOOT /* enable preboot variable */ 58 59 /* 60 * Hardware drivers 61 */ 62 63 /* general purpose I/O */ 64 #define CONFIG_AT91_GPIO 65 66 /* Console output */ 67 #define CONFIG_ATMEL_USART 68 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 69 #define CONFIG_USART_ID ATMEL_ID_SYS 70 #define CONFIG_BAUDRATE 115200 71 72 #define CONFIG_ZERO_BOOTDELAY_CHECK 73 74 /* 75 * BOOTP options 76 */ 77 #define CONFIG_BOOTP_BOOTFILESIZE 78 #define CONFIG_BOOTP_BOOTPATH 79 #define CONFIG_BOOTP_GATEWAY 80 #define CONFIG_BOOTP_HOSTNAME 81 82 /* 83 * Command line configuration. 84 */ 85 86 #ifdef CONFIG_SYS_USE_NANDFLASH 87 #define CONFIG_CMD_NAND 88 #endif 89 90 /* LED */ 91 #define CONFIG_AT91_LED 92 93 /* 94 * SDRAM: 1 bank, min 32, max 128 MB 95 * Initialized before u-boot gets started. 96 */ 97 #define PHYS_SDRAM ATMEL_BASE_CS1 /* 0x20000000 */ 98 #define PHYS_SDRAM_SIZE 0x02000000 /* 32 MByte */ 99 100 #define CONFIG_NR_DRAM_BANKS 1 101 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 102 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE 103 104 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) 105 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) 106 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) 107 108 /* 109 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 110 * leaving the correct space for initial global data structure above 111 * that address while providing maximum stack area below. 112 */ 113 #define CONFIG_SYS_INIT_SP_ADDR \ 114 (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE) 115 116 /* DataFlash */ 117 #ifdef CONFIG_SYS_USE_DATAFLASH 118 # define CONFIG_ATMEL_DATAFLASH_SPI 119 # define CONFIG_HAS_DATAFLASH 120 # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 121 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 122 # define AT91_SPI_CLK 15000000 123 # define DATAFLASH_TCSS (0x1a << 16) 124 # define DATAFLASH_TCHS (0x1 << 24) 125 #endif 126 127 /* NOR flash is not populated, disable it */ 128 #define CONFIG_SYS_NO_FLASH 129 130 /* NAND flash */ 131 #ifdef CONFIG_CMD_NAND 132 # define CONFIG_NAND_ATMEL 133 # define CONFIG_SYS_MAX_NAND_DEVICE 1 134 # define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 /* 0x40000000 */ 135 # define CONFIG_SYS_NAND_DBW_8 136 # define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 137 # define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 138 # define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) 139 # define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) 140 #endif 141 142 /* Ethernet */ 143 #define CONFIG_MACB 144 #define CONFIG_RMII 145 #define CONFIG_NET_RETRY_COUNT 20 146 #undef CONFIG_RESET_PHY_R 147 148 /* hw-controller addresses */ 149 #define CONFIG_ET1100_BASE 0x70000000 150 151 #ifdef CONFIG_SYS_USE_DATAFLASH 152 153 /* bootstrap + u-boot + env in dataflash on CS0 */ 154 # define CONFIG_ENV_IS_IN_DATAFLASH 155 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ 156 0x8400) 157 # define CONFIG_ENV_OFFSET 0x4200 158 # define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ 159 CONFIG_ENV_OFFSET) 160 # define CONFIG_ENV_SIZE 0x4200 161 162 #elif CONFIG_SYS_USE_NANDFLASH 163 164 /* bootstrap + u-boot + env + linux in nandflash */ 165 # define CONFIG_ENV_IS_IN_NAND 1 166 # define CONFIG_ENV_OFFSET 0xC0000 167 # define CONFIG_ENV_SIZE 0x20000 168 169 #endif 170 171 #define CONFIG_SYS_CBSIZE 512 172 #define CONFIG_SYS_MAXARGS 16 173 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 174 sizeof(CONFIG_SYS_PROMPT) + 16) 175 #define CONFIG_SYS_LONGHELP 176 #define CONFIG_CMDLINE_EDITING 177 #define CONFIG_AUTO_COMPLETE 178 179 /* 180 * Size of malloc() pool 181 */ 182 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 183 128*1024, 0x1000) 184 185 #endif 186