1 /* 2 * Copyright (C) 2011 Ilya Yanok, Emcraft Systems 3 * 4 * Based on omap3_evm_config.h 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 /* 13 * High Level Configuration Options 14 */ 15 #define CONFIG_OMAP /* in a TI OMAP core */ 16 #define CONFIG_OMAP3_MCX /* working with mcx */ 17 #define CONFIG_OMAP_GPIO 18 #define CONFIG_OMAP_COMMON 19 /* Common ARM Erratas */ 20 #define CONFIG_ARM_ERRATA_454179 21 #define CONFIG_ARM_ERRATA_430973 22 #define CONFIG_ARM_ERRATA_621766 23 24 #define MACH_TYPE_MCX 3656 25 #define CONFIG_MACH_TYPE MACH_TYPE_MCX 26 #define CONFIG_BOARD_LATE_INIT 27 28 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 29 30 #include <asm/arch/cpu.h> /* get chip and board defs */ 31 #include <asm/arch/omap.h> 32 33 /* 34 * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader 35 * and older u-boot.bin with the new U-Boot SPL. 36 */ 37 #define CONFIG_SYS_TEXT_BASE 0x80008000 38 39 /* Clock Defines */ 40 #define V_OSCK 26000000 /* Clock output from T2 */ 41 #define V_SCLK (V_OSCK >> 1) 42 43 #define CONFIG_MISC_INIT_R 44 45 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 47 #define CONFIG_INITRD_TAG 48 #define CONFIG_REVISION_TAG 49 50 /* 51 * Size of malloc() pool 52 */ 53 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 54 #define CONFIG_SYS_MALLOC_LEN (1024 << 10) 55 /* 56 * DDR related 57 */ 58 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 59 60 /* 61 * Hardware drivers 62 */ 63 64 /* 65 * NS16550 Configuration 66 */ 67 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 68 69 #define CONFIG_SYS_NS16550_SERIAL 70 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 71 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 72 73 /* 74 * select serial console configuration 75 */ 76 #define CONFIG_CONS_INDEX 3 77 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 78 #define CONFIG_SERIAL3 3 /* UART3 */ 79 80 /* allow to overwrite serial and ethaddr */ 81 #define CONFIG_ENV_OVERWRITE 82 #define CONFIG_BAUDRATE 115200 83 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 84 115200} 85 #define CONFIG_MMC 86 #define CONFIG_OMAP_HSMMC 87 #define CONFIG_GENERIC_MMC 88 #define CONFIG_DOS_PARTITION 89 90 /* EHCI */ 91 #define CONFIG_OMAP3_GPIO_2 92 #define CONFIG_OMAP3_GPIO_5 93 #define CONFIG_USB_EHCI 94 #define CONFIG_USB_EHCI_OMAP 95 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 96 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 97 #define CONFIG_USB_HOST_ETHER 98 #define CONFIG_USB_ETHER_ASIX 99 #define CONFIG_USB_ETHER_MCS7830 100 101 /* commands to include */ 102 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 103 104 #define CONFIG_CMD_DATE 105 #define CONFIG_CMD_NAND /* NAND support */ 106 #define CONFIG_CMD_UBIFS 107 #define CONFIG_RBTREE 108 #define CONFIG_LZO 109 #define CONFIG_MTD_PARTITIONS 110 #define CONFIG_MTD_DEVICE 111 #define CONFIG_CMD_MTDPARTS 112 113 #define CONFIG_SYS_NO_FLASH 114 #define CONFIG_SYS_I2C 115 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 116 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 117 #define CONFIG_SYS_I2C_OMAP34XX 118 119 /* RTC */ 120 #define CONFIG_RTC_DS1337 121 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 122 123 /* 124 * Board NAND Info. 125 */ 126 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 127 /* to access nand */ 128 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 129 /* to access */ 130 /* nand at CS0 */ 131 132 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 133 /* NAND devices */ 134 #define CONFIG_JFFS2_NAND 135 /* nand device jffs2 lives on */ 136 #define CONFIG_JFFS2_DEV "nand0" 137 /* start of jffs2 partition */ 138 #define CONFIG_JFFS2_PART_OFFSET 0x680000 139 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 140 141 /* Environment information */ 142 143 #define CONFIG_BOOTFILE "uImage" 144 145 /* Setup MTD for NAND on the SOM */ 146 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 147 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \ 148 "1m(u-boot),256k(env1)," \ 149 "256k(env2),6m(kernel),6m(k_recovery)," \ 150 "8m(fs_recovery),-(common_data)" 151 152 #define CONFIG_HOSTNAME mcx 153 #define CONFIG_EXTRA_ENV_SETTINGS \ 154 "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0" \ 155 "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0" \ 156 "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ 157 "addfb=setenv bootargs ${bootargs} vram=6M " \ 158 "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0" \ 159 "addip_sta=setenv bootargs ${bootargs} " \ 160 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 161 "${netmask}:${hostname}:eth0:off\0" \ 162 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 163 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 164 "else run addip_sta;fi\0" \ 165 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 166 "addtty=setenv bootargs ${bootargs} " \ 167 "console=${consoledev},${baudrate}\0" \ 168 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 169 "baudrate=115200\0" \ 170 "consoledev=ttyO2\0" \ 171 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 172 "loadaddr=0x82000000\0" \ 173 "load=tftp ${loadaddr} ${u-boot}\0" \ 174 "load_k=tftp ${loadaddr} ${bootfile}\0" \ 175 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 176 "loadmlo=tftp ${loadaddr} ${mlo}\0" \ 177 "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0" \ 178 "mmcargs=root=/dev/mmcblk0p2 rw " \ 179 "rootfstype=ext3 rootwait\0" \ 180 "mmcboot=echo Booting from mmc ...; " \ 181 "run mmcargs; " \ 182 "run addip addtty addmtd addfb addeth addmisc;" \ 183 "run loaduimage; " \ 184 "bootm ${loadaddr}\0" \ 185 "net_nfs=run load_k; " \ 186 "run nfsargs; " \ 187 "run addip addtty addmtd addfb addeth addmisc;" \ 188 "bootm ${loadaddr}\0" \ 189 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 190 "nfsroot=${serverip}:${rootpath}\0" \ 191 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0" \ 192 "uboot_addr=0x80000\0" \ 193 "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ 194 "nand write ${loadaddr} ${uboot_addr} 80000\0" \ 195 "updatemlo=nandecc hw;nand erase 0 20000;" \ 196 "nand write ${loadaddr} 0 20000\0" \ 197 "upd=if run load;then echo Updating u-boot;if run update;" \ 198 "then echo U-Boot updated;" \ 199 "else echo Error updating u-boot !;" \ 200 "echo Board without bootloader !!;" \ 201 "fi;" \ 202 "else echo U-Boot not downloaded..exiting;fi\0" \ 203 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 204 "bootscript=echo Running bootscript from mmc ...; " \ 205 "source ${loadaddr}\0" \ 206 "nandargs=setenv bootargs ubi.mtd=7 " \ 207 "root=ubi0:rootfs rootfstype=ubifs\0" \ 208 "nandboot=echo Booting from nand ...; " \ 209 "run nandargs; " \ 210 "ubi part nand0,4;" \ 211 "ubi readvol ${loadaddr} kernel;" \ 212 "run addtty addmtd addfb addeth addmisc;" \ 213 "bootm ${loadaddr}\0" \ 214 "preboot=ubi part nand0,7;" \ 215 "ubi readvol ${loadaddr} splash;" \ 216 "bmp display ${loadaddr};" \ 217 "gpio set 55\0" \ 218 "swupdate_args=setenv bootargs root=/dev/ram " \ 219 "quiet loglevel=1 " \ 220 "consoleblank=0 ${swupdate_misc}\0" \ 221 "swupdate=echo Running Sw-Update...;" \ 222 "if printenv mtdparts;then echo Starting SwUpdate...; " \ 223 "else mtdparts default;fi; " \ 224 "ubi part nand0,5;" \ 225 "ubi readvol 0x82000000 kernel_recovery;" \ 226 "ubi part nand0,6;" \ 227 "ubi readvol 0x84000000 fs_recovery;" \ 228 "run swupdate_args; " \ 229 "setenv bootargs ${bootargs} " \ 230 "${mtdparts} " \ 231 "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ 232 "omapdss.def_disp=lcd;" \ 233 "bootm 0x82000000 0x84000000\0" \ 234 "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \ 235 "then source 82000000;else run nandboot;fi\0" 236 237 #define CONFIG_AUTO_COMPLETE 238 #define CONFIG_CMDLINE_EDITING 239 240 /* 241 * Miscellaneous configurable options 242 */ 243 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 244 #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ 245 /* Print Buffer Size */ 246 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 247 sizeof(CONFIG_SYS_PROMPT) + 16) 248 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 249 /* args */ 250 /* Boot Argument Buffer Size */ 251 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 252 /* memtest works on */ 253 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 254 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 255 0x01F00000) /* 31MB */ 256 257 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 258 /* address */ 259 #define CONFIG_PREBOOT 260 261 /* 262 * AM3517 has 12 GP timers, they can be driven by the system clock 263 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 264 * This rate is divided by a local divisor. 265 */ 266 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 267 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 268 269 /* 270 * Physical Memory Map 271 */ 272 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 273 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 274 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 275 276 /* 277 * FLASH and environment organization 278 */ 279 280 /* **** PISMO SUPPORT *** */ 281 #define CONFIG_NAND 282 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 283 #define CONFIG_NAND_OMAP_GPMC 284 #define CONFIG_NAND_OMAP_GPMC_PREFETCH 285 #define CONFIG_ENV_IS_IN_NAND 286 #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ 287 288 /* Redundant Environment */ 289 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 290 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 291 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 292 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 293 2 * CONFIG_SYS_ENV_SECT_SIZE) 294 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 295 296 /* Flash banks JFFS2 should use */ 297 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 298 CONFIG_SYS_MAX_NAND_DEVICE) 299 #define CONFIG_SYS_JFFS2_MEM_NAND 300 /* use flash_info[2] */ 301 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 302 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 303 304 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 305 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 306 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 307 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 308 CONFIG_SYS_INIT_RAM_SIZE - \ 309 GENERATED_GBL_DATA_SIZE) 310 311 /* Defines for SPL */ 312 #define CONFIG_SPL_FRAMEWORK 313 #define CONFIG_SPL_BOARD_INIT 314 #define CONFIG_SPL_NAND_SIMPLE 315 316 #define CONFIG_SPL_NAND_BASE 317 #define CONFIG_SPL_NAND_DRIVERS 318 #define CONFIG_SPL_NAND_ECC 319 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 320 321 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 322 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 323 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 324 325 /* move malloc and bss high to prevent clashing with the main image */ 326 #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 327 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 328 #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ 329 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 330 331 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 332 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 333 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 334 335 /* NAND boot config */ 336 #define CONFIG_SYS_NAND_PAGE_COUNT 64 337 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 338 #define CONFIG_SYS_NAND_OOBSIZE 64 339 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 340 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 341 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 342 #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ 343 48, 49, 50, 51, 52, 53, 54, 55,\ 344 56, 57, 58, 59, 60, 61, 62, 63} 345 #define CONFIG_SYS_NAND_ECCSIZE 256 346 #define CONFIG_SYS_NAND_ECCBYTES 3 347 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW 348 #define CONFIG_SPL_NAND_SOFTECC 349 350 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 351 352 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 353 354 /* 355 * ethernet support 356 * 357 */ 358 #if defined(CONFIG_CMD_NET) 359 #define CONFIG_DRIVER_TI_EMAC 360 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 361 #define CONFIG_MII 362 #define CONFIG_BOOTP_DNS 363 #define CONFIG_BOOTP_DNS2 364 #define CONFIG_BOOTP_SEND_HOSTNAME 365 #define CONFIG_NET_RETRY_COUNT 10 366 #endif 367 368 #define CONFIG_VIDEO 369 #define CONFIG_CFB_CONSOLE 370 #define CONFIG_VGA_AS_SINGLE_DEVICE 371 #define CONFIG_SPLASH_SCREEN 372 #define CONFIG_VIDEO_BMP_RLE8 373 #define CONFIG_CMD_BMP 374 #define CONFIG_VIDEO_OMAP3 375 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 376 377 #endif /* __CONFIG_H */ 378