1 /* 2 * Copyright (C) 2011 Ilya Yanok, Emcraft Systems 3 * 4 * Based on omap3_evm_config.h 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc. 19 */ 20 21 #ifndef __CONFIG_H 22 #define __CONFIG_H 23 24 /* 25 * High Level Configuration Options 26 */ 27 #define CONFIG_OMAP /* in a TI OMAP core */ 28 #define CONFIG_OMAP34XX /* which is a 34XX */ 29 #define CONFIG_OMAP3_MCX /* working with mcx */ 30 #define CONFIG_OMAP_GPIO 31 32 #define MACH_TYPE_MCX 3656 33 #define CONFIG_MACH_TYPE MACH_TYPE_MCX 34 #define CONFIG_BOARD_LATE_INIT 35 36 #define CONFIG_SYS_CACHELINE_SIZE 64 37 38 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 39 40 #include <asm/arch/cpu.h> /* get chip and board defs */ 41 #include <asm/arch/omap3.h> 42 43 #define CONFIG_OF_LIBFDT 44 #define CONFIG_FIT 45 46 /* 47 * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader 48 * and older u-boot.bin with the new U-Boot SPL. 49 */ 50 #define CONFIG_SYS_TEXT_BASE 0x80008000 51 52 /* 53 * Display CPU and Board information 54 */ 55 #define CONFIG_DISPLAY_CPUINFO 56 #define CONFIG_DISPLAY_BOARDINFO 57 58 /* Clock Defines */ 59 #define V_OSCK 26000000 /* Clock output from T2 */ 60 #define V_SCLK (V_OSCK >> 1) 61 62 #define CONFIG_MISC_INIT_R 63 64 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 65 #define CONFIG_SETUP_MEMORY_TAGS 66 #define CONFIG_INITRD_TAG 67 #define CONFIG_REVISION_TAG 68 69 /* 70 * Size of malloc() pool 71 */ 72 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 73 #define CONFIG_SYS_MALLOC_LEN (1024 << 10) 74 /* 75 * DDR related 76 */ 77 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 78 79 /* 80 * Hardware drivers 81 */ 82 83 /* 84 * NS16550 Configuration 85 */ 86 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 87 88 #define CONFIG_SYS_NS16550 89 #define CONFIG_SYS_NS16550_SERIAL 90 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 91 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 92 93 /* 94 * select serial console configuration 95 */ 96 #define CONFIG_CONS_INDEX 3 97 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 98 #define CONFIG_SERIAL3 3 /* UART3 */ 99 100 /* allow to overwrite serial and ethaddr */ 101 #define CONFIG_ENV_OVERWRITE 102 #define CONFIG_BAUDRATE 115200 103 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 104 115200} 105 #define CONFIG_MMC 106 #define CONFIG_OMAP_HSMMC 107 #define CONFIG_GENERIC_MMC 108 #define CONFIG_DOS_PARTITION 109 110 /* EHCI */ 111 #define CONFIG_USB_STORAGE 112 #define CONFIG_OMAP3_GPIO_5 113 #define CONFIG_USB_EHCI 114 #define CONFIG_USB_EHCI_OMAP 115 #define CONFIG_USB_ULPI 116 #define CONFIG_USB_ULPI_VIEWPORT_OMAP 117 /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */ 118 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 154 119 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 152 120 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 121 122 /* commands to include */ 123 #include <config_cmd_default.h> 124 125 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 126 #define CONFIG_CMD_FAT /* FAT support */ 127 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 128 129 #define CONFIG_CMD_DATE 130 #define CONFIG_CMD_I2C /* I2C serial bus support */ 131 #define CONFIG_CMD_MMC /* MMC support */ 132 #define CONFIG_CMD_FAT /* FAT support */ 133 #define CONFIG_CMD_USB 134 #define CONFIG_CMD_NAND /* NAND support */ 135 #define CONFIG_CMD_DHCP 136 #define CONFIG_CMD_PING 137 #define CONFIG_CMD_CACHE 138 #define CONFIG_CMD_UBI 139 #define CONFIG_CMD_UBIFS 140 #define CONFIG_RBTREE 141 #define CONFIG_LZO 142 #define CONFIG_MTD_PARTITIONS 143 #define CONFIG_MTD_DEVICE 144 #define CONFIG_CMD_MTDPARTS 145 #define CONFIG_CMD_GPIO 146 147 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 148 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 149 #undef CONFIG_CMD_IMI /* iminfo */ 150 #undef CONFIG_CMD_IMLS /* List all found images */ 151 152 #define CONFIG_SYS_NO_FLASH 153 #define CONFIG_HARD_I2C 154 #define CONFIG_SYS_I2C_SPEED 100000 155 #define CONFIG_SYS_I2C_SLAVE 1 156 #define CONFIG_SYS_I2C_BUS 0 157 #define CONFIG_DRIVER_OMAP34XX_I2C 158 159 /* RTC */ 160 #define CONFIG_RTC_DS1337 161 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 162 163 #define CONFIG_CMD_NET 164 #define CONFIG_CMD_MII 165 #define CONFIG_CMD_NFS 166 /* 167 * Board NAND Info. 168 */ 169 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 170 /* to access nand */ 171 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 172 /* to access */ 173 /* nand at CS0 */ 174 175 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 176 /* NAND devices */ 177 #define CONFIG_JFFS2_NAND 178 /* nand device jffs2 lives on */ 179 #define CONFIG_JFFS2_DEV "nand0" 180 /* start of jffs2 partition */ 181 #define CONFIG_JFFS2_PART_OFFSET 0x680000 182 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 183 184 /* Environment information */ 185 #define CONFIG_BOOTDELAY 10 186 187 #define CONFIG_BOOTFILE "uImage" 188 189 #define xstr(s) str(s) 190 #define str(s) #s 191 192 /* Setup MTD for NAND on the SOM */ 193 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 194 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \ 195 "1m(u-boot),256k(env1)," \ 196 "256k(env2),6m(kernel),6m(k_recovery)," \ 197 "8m(fs_recovery),-(common_data)" 198 199 #define CONFIG_HOSTNAME mcx 200 #define CONFIG_EXTRA_ENV_SETTINGS \ 201 "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0" \ 202 "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0" \ 203 "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ 204 "addfb=setenv bootargs ${bootargs} vram=6M " \ 205 "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0" \ 206 "addip_sta=setenv bootargs ${bootargs} " \ 207 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 208 "${netmask}:${hostname}:eth0:off\0" \ 209 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 210 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 211 "else run addip_sta;fi\0" \ 212 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 213 "addtty=setenv bootargs ${bootargs} " \ 214 "console=${consoledev},${baudrate}\0" \ 215 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 216 "baudrate=115200\0" \ 217 "consoledev=ttyO2\0" \ 218 "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ 219 "loadaddr=0x82000000\0" \ 220 "load=tftp ${loadaddr} ${u-boot}\0" \ 221 "load_k=tftp ${loadaddr} ${bootfile}\0" \ 222 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 223 "loadmlo=tftp ${loadaddr} ${mlo}\0" \ 224 "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \ 225 "mmcargs=root=/dev/mmcblk0p2 rw " \ 226 "rootfstype=ext3 rootwait\0" \ 227 "mmcboot=echo Booting from mmc ...; " \ 228 "run mmcargs; " \ 229 "run addip addtty addmtd addfb addeth addmisc;" \ 230 "run loaduimage; " \ 231 "bootm ${loadaddr}\0" \ 232 "net_nfs=run load_k; " \ 233 "run nfsargs; " \ 234 "run addip addtty addmtd addfb addeth addmisc;" \ 235 "bootm ${loadaddr}\0" \ 236 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 237 "nfsroot=${serverip}:${rootpath}\0" \ 238 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \ 239 "uboot_addr=0x80000\0" \ 240 "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ 241 "nand write ${loadaddr} ${uboot_addr} 80000\0" \ 242 "updatemlo=nandecc hw;nand erase 0 20000;" \ 243 "nand write ${loadaddr} 0 20000\0" \ 244 "upd=if run load;then echo Updating u-boot;if run update;" \ 245 "then echo U-Boot updated;" \ 246 "else echo Error updating u-boot !;" \ 247 "echo Board without bootloader !!;" \ 248 "fi;" \ 249 "else echo U-Boot not downloaded..exiting;fi\0" \ 250 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 251 "bootscript=echo Running bootscript from mmc ...; " \ 252 "source ${loadaddr}\0" \ 253 "nandargs=setenv bootargs ubi.mtd=7 " \ 254 "root=ubi0:rootfs rootfstype=ubifs\0" \ 255 "nandboot=echo Booting from nand ...; " \ 256 "run nandargs; " \ 257 "ubi part nand0,4;" \ 258 "ubi readvol ${loadaddr} kernel;" \ 259 "run addip addtty addmtd addfb addeth addmisc;" \ 260 "bootm ${loadaddr}\0" \ 261 "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\ 262 "rootfstype=ubifs quiet loglevel=1 " \ 263 "consoleblank=0 ${swupdate_misc}\0" \ 264 "swupdate=echo Running Sw-Update...;" \ 265 "if printenv mtdparts;then echo Starting SwUpdate...; " \ 266 "else mtdparts default;fi; " \ 267 "ubi part nand0,5;" \ 268 "ubi readvol 0x82000000 kernel_recovery;" \ 269 "run swupdate_args; " \ 270 "setenv bootargs ${bootargs} " \ 271 "${mtdparts} " \ 272 "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ 273 "omapdss.def_disp=lcd;" \ 274 "bootm ${loadaddr}\0" 275 276 #define CONFIG_BOOTCOMMAND \ 277 "run nandboot" 278 279 #define CONFIG_AUTO_COMPLETE 280 #define CONFIG_CMDLINE_EDITING 281 282 /* 283 * Miscellaneous configurable options 284 */ 285 #define V_PROMPT "mcx # " 286 287 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 288 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 289 #define CONFIG_SYS_PROMPT V_PROMPT 290 #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ 291 /* Print Buffer Size */ 292 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 293 sizeof(CONFIG_SYS_PROMPT) + 16) 294 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 295 /* args */ 296 /* Boot Argument Buffer Size */ 297 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 298 /* memtest works on */ 299 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 300 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 301 0x01F00000) /* 31MB */ 302 303 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 304 /* address */ 305 306 /* 307 * AM3517 has 12 GP timers, they can be driven by the system clock 308 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 309 * This rate is divided by a local divisor. 310 */ 311 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 312 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 313 #define CONFIG_SYS_HZ 1000 314 315 /* 316 * Physical Memory Map 317 */ 318 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 319 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 320 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 321 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 322 323 /* 324 * FLASH and environment organization 325 */ 326 327 /* **** PISMO SUPPORT *** */ 328 329 /* Configure the PISMO */ 330 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 331 332 #define CONFIG_NAND_OMAP_GPMC 333 #define GPMC_NAND_ECC_LP_x16_LAYOUT 334 #define CONFIG_ENV_IS_IN_NAND 335 #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ 336 337 /* Redundant Environment */ 338 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 339 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 340 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 341 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 342 2 * CONFIG_SYS_ENV_SECT_SIZE) 343 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 344 345 /* Flash banks JFFS2 should use */ 346 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 347 CONFIG_SYS_MAX_NAND_DEVICE) 348 #define CONFIG_SYS_JFFS2_MEM_NAND 349 /* use flash_info[2] */ 350 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 351 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 352 353 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 354 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 355 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 356 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 357 CONFIG_SYS_INIT_RAM_SIZE - \ 358 GENERATED_GBL_DATA_SIZE) 359 360 /* Defines for SPL */ 361 #define CONFIG_SPL 362 #define CONFIG_SPL_NAND_SIMPLE 363 #define CONFIG_SPL_NAND_SOFTECC 364 365 #define CONFIG_SPL_LIBCOMMON_SUPPORT 366 #define CONFIG_SPL_LIBDISK_SUPPORT 367 #define CONFIG_SPL_I2C_SUPPORT 368 #define CONFIG_SPL_MMC_SUPPORT 369 #define CONFIG_SPL_FAT_SUPPORT 370 #define CONFIG_SPL_LIBGENERIC_SUPPORT 371 #define CONFIG_SPL_SERIAL_SUPPORT 372 #define CONFIG_SPL_POWER_SUPPORT 373 #define CONFIG_SPL_NAND_SUPPORT 374 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 375 376 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 377 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 378 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 379 380 /* move malloc and bss high to prevent clashing with the main image */ 381 #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 382 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 383 #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ 384 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 385 386 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 387 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 388 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 389 390 /* NAND boot config */ 391 #define CONFIG_SYS_NAND_PAGE_COUNT 64 392 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 393 #define CONFIG_SYS_NAND_OOBSIZE 64 394 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 395 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 396 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 397 #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ 398 48, 49, 50, 51, 52, 53, 54, 55,\ 399 56, 57, 58, 59, 60, 61, 62, 63} 400 #define CONFIG_SYS_NAND_ECCSIZE 256 401 #define CONFIG_SYS_NAND_ECCBYTES 3 402 403 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 404 405 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 406 407 /* 408 * ethernet support 409 * 410 */ 411 #if defined(CONFIG_CMD_NET) 412 #define CONFIG_DRIVER_TI_EMAC 413 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 414 #define CONFIG_MII 415 #define CONFIG_BOOTP_DEFAULT 416 #define CONFIG_BOOTP_DNS 417 #define CONFIG_BOOTP_DNS2 418 #define CONFIG_BOOTP_SEND_HOSTNAME 419 #define CONFIG_NET_RETRY_COUNT 10 420 #endif 421 422 #endif /* __CONFIG_H */ 423