1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_MV7846MP_GP_H 8 #define _CONFIG_DB_MV7846MP_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 27 /* I2C */ 28 #define CONFIG_SYS_I2C 29 #define CONFIG_SYS_I2C_MVTWSI 30 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 31 #define CONFIG_SYS_I2C_SLAVE 0x0 32 #define CONFIG_SYS_I2C_SPEED 100000 33 34 /* SPI NOR flash default params, used by sf commands */ 35 #define CONFIG_SF_DEFAULT_SPEED 1000000 36 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 37 38 /* Environment in SPI NOR flash */ 39 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 40 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 41 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 42 43 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 44 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 45 46 #define CONFIG_SYS_ALT_MEMTEST 47 48 /* 49 * mv-common.h should be defined after CMD configs since it used them 50 * to enable certain macros 51 */ 52 #include "mv-common.h" 53 54 /* 55 * Memory layout while starting into the bin_hdr via the 56 * BootROM: 57 * 58 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 59 * 0x4000.4030 bin_hdr start address 60 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 61 * 0x4007.fffc BootROM stack top 62 * 63 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 64 * L2 cache thus cannot be used. 65 */ 66 67 /* SPL */ 68 /* Defines for SPL */ 69 #define CONFIG_SPL_FRAMEWORK 70 #define CONFIG_SPL_TEXT_BASE 0x40004030 71 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 72 73 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 74 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 75 76 #ifdef CONFIG_SPL_BUILD 77 #define CONFIG_SYS_MALLOC_SIMPLE 78 #endif 79 80 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 81 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 82 83 /* SPL related SPI defines */ 84 #define CONFIG_SPL_SPI_LOAD 85 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 86 87 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 88 #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ 89 #define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ 90 91 #endif /* _CONFIG_DB_MV7846MP_GP_H */ 92