1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_MV7846MP_GP_H 8 #define _CONFIG_DB_MV7846MP_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_ARMADA_XP /* SOC Family Name */ 14 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO_LATE 17 18 #define CONFIG_SYS_TEXT_BASE 0x04000000 19 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 20 21 /* 22 * Commands configuration 23 */ 24 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 25 #define CONFIG_CMD_DHCP 26 #define CONFIG_CMD_ENV 27 #define CONFIG_CMD_I2C 28 #define CONFIG_CMD_PING 29 #define CONFIG_CMD_SF 30 #define CONFIG_CMD_SPI 31 #define CONFIG_CMD_TFTPPUT 32 #define CONFIG_CMD_TIME 33 34 /* I2C */ 35 #define CONFIG_SYS_I2C 36 #define CONFIG_SYS_I2C_MVTWSI 37 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 38 #define CONFIG_SYS_I2C_SLAVE 0x0 39 #define CONFIG_SYS_I2C_SPEED 100000 40 41 /* SPI NOR flash default params, used by sf commands */ 42 #define CONFIG_SF_DEFAULT_SPEED 1000000 43 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 44 #define CONFIG_SPI_FLASH_STMICRO 45 #define CONFIG_SPI_FLASH_SPANSION 46 47 /* Environment in SPI NOR flash */ 48 #define CONFIG_ENV_IS_IN_SPI_FLASH 49 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 50 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 51 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 52 53 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 54 #define CONFIG_PHY_ADDR { 0x0, 0x1, 0x2, 0x3 } 55 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII 56 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 57 #define CONFIG_RESET_PHY_R 58 59 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 60 #define CONFIG_SYS_ALT_MEMTEST 61 62 /* 63 * mv-common.h should be defined after CMD configs since it used them 64 * to enable certain macros 65 */ 66 #include "mv-common.h" 67 68 /* 69 * Memory layout while starting into the bin_hdr via the 70 * BootROM: 71 * 72 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 73 * 0x4000.4030 bin_hdr start address 74 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 75 * 0x4007.fffc BootROM stack top 76 * 77 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 78 * L2 cache thus cannot be used. 79 */ 80 81 /* SPL */ 82 /* Defines for SPL */ 83 #define CONFIG_SPL_FRAMEWORK 84 #define CONFIG_SPL_TEXT_BASE 0x40004030 85 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 86 87 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 88 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 89 90 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 91 CONFIG_SPL_BSS_MAX_SIZE) 92 #define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) 93 94 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 95 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 96 97 #define CONFIG_SPL_LIBCOMMON_SUPPORT 98 #define CONFIG_SPL_LIBGENERIC_SUPPORT 99 #define CONFIG_SPL_SERIAL_SUPPORT 100 #define CONFIG_SPL_I2C_SUPPORT 101 102 /* SPL related SPI defines */ 103 #define CONFIG_SPL_SPI_SUPPORT 104 #define CONFIG_SPL_SPI_FLASH_SUPPORT 105 #define CONFIG_SPL_SPI_LOAD 106 #define CONFIG_SPL_SPI_BUS 0 107 #define CONFIG_SPL_SPI_CS 0 108 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 109 110 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 111 #define CONFIG_SYS_MVEBU_DDR 112 #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ 113 114 #endif /* _CONFIG_DB_MV7846MP_GP_H */ 115