1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_MV7846MP_GP_H 8 #define _CONFIG_DB_MV7846MP_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 27 #define CONFIG_CMD_DHCP 28 #define CONFIG_CMD_ENV 29 #define CONFIG_CMD_I2C 30 #define CONFIG_CMD_PING 31 #define CONFIG_CMD_SF 32 #define CONFIG_CMD_SPI 33 #define CONFIG_CMD_TFTPPUT 34 #define CONFIG_CMD_TIME 35 36 /* I2C */ 37 #define CONFIG_SYS_I2C 38 #define CONFIG_SYS_I2C_MVTWSI 39 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 40 #define CONFIG_SYS_I2C_SLAVE 0x0 41 #define CONFIG_SYS_I2C_SPEED 100000 42 43 /* SPI NOR flash default params, used by sf commands */ 44 #define CONFIG_SF_DEFAULT_SPEED 1000000 45 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 46 47 /* Environment in SPI NOR flash */ 48 #define CONFIG_ENV_IS_IN_SPI_FLASH 49 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 50 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 51 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 52 53 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 54 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 55 56 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 57 #define CONFIG_SYS_ALT_MEMTEST 58 59 /* 60 * mv-common.h should be defined after CMD configs since it used them 61 * to enable certain macros 62 */ 63 #include "mv-common.h" 64 65 /* 66 * Memory layout while starting into the bin_hdr via the 67 * BootROM: 68 * 69 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 70 * 0x4000.4030 bin_hdr start address 71 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 72 * 0x4007.fffc BootROM stack top 73 * 74 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 75 * L2 cache thus cannot be used. 76 */ 77 78 /* SPL */ 79 /* Defines for SPL */ 80 #define CONFIG_SPL_FRAMEWORK 81 #define CONFIG_SPL_TEXT_BASE 0x40004030 82 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 83 84 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 85 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 86 87 #ifdef CONFIG_SPL_BUILD 88 #define CONFIG_SYS_MALLOC_SIMPLE 89 #endif 90 91 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 92 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 93 94 #define CONFIG_SPL_LIBCOMMON_SUPPORT 95 #define CONFIG_SPL_LIBGENERIC_SUPPORT 96 #define CONFIG_SPL_SERIAL_SUPPORT 97 #define CONFIG_SPL_I2C_SUPPORT 98 99 /* SPL related SPI defines */ 100 #define CONFIG_SPL_SPI_SUPPORT 101 #define CONFIG_SPL_SPI_FLASH_SUPPORT 102 #define CONFIG_SPL_SPI_LOAD 103 #define CONFIG_SPL_SPI_BUS 0 104 #define CONFIG_SPL_SPI_CS 0 105 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 106 107 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 108 #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ 109 #define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ 110 111 #endif /* _CONFIG_DB_MV7846MP_GP_H */ 112