1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (c) 2012 Michael Walle 4 * Michael Walle <michael@walle.cc> 5 */ 6 7 #ifndef _CONFIG_LSXL_H 8 #define _CONFIG_LSXL_H 9 10 /* 11 * Version number information 12 */ 13 #if defined(CONFIG_LSCHLV2) 14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 15 #define CONFIG_MACH_TYPE 3006 16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 17 #elif defined(CONFIG_LSXHL) 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 19 #define CONFIG_MACH_TYPE 2663 20 /* CONFIG_SYS_TCLK is 200000000 by default */ 21 #else 22 #error "unknown board" 23 #endif 24 25 /* 26 * General configuration options 27 */ 28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 /* SOC Name */ 30 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 32 #define CONFIG_SHOW_BOOT_PROGRESS 33 34 #define CONFIG_KIRKWOOD_GPIO 35 36 /* 37 * Commands configuration 38 */ 39 40 /* 41 * mv-common.h should be defined after CMD configs since it used them 42 * to enable certain macros 43 */ 44 #include "mv-common.h" 45 46 /* loading initramfs images without uimage header */ 47 48 /* ST M25P40 */ 49 #undef CONFIG_ENV_SPI_MAX_HZ 50 #define CONFIG_ENV_SPI_MAX_HZ 25000000 51 #undef CONFIG_SF_DEFAULT_SPEED 52 #define CONFIG_SF_DEFAULT_SPEED 25000000 53 54 /* 55 * Environment variables configurations 56 */ 57 #ifdef CONFIG_SPI_FLASH 58 #define CONFIG_SYS_MAX_FLASH_BANKS 1 59 #define CONFIG_SYS_MAX_FLASH_SECT 8 60 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 61 #endif 62 63 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 64 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 65 66 /* 67 * Default environment variables 68 */ 69 #define CONFIG_LOADADDR 0x00800000 70 71 #if defined(CONFIG_LSXHL) 72 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 73 #elif defined(CONFIG_LSCHLV2) 74 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 75 #else 76 #error "Unsupported board" 77 #endif 78 79 #define CONFIG_EXTRA_ENV_SETTINGS \ 80 "bootsource=legacy\0" \ 81 "hdpart=0:1\0" \ 82 "kernel_addr=0x00800000\0" \ 83 "ramdisk_addr=0x01000000\0" \ 84 "fdt_addr=0x00ff0000\0" \ 85 "bootcmd_legacy=ide reset " \ 86 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 87 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 88 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 89 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 90 "&& tftpboot ${ramdisk_addr} initrd.img " \ 91 "&& setenv ramdisk_len ${filesize} " \ 92 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 93 "&& bootz ${kernel_addr} " \ 94 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 95 "bootcmd_hdd=ide reset " \ 96 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 97 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 98 "&& setenv ramdisk_len ${filesize} " \ 99 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 100 "&& bootz ${kernel_addr} " \ 101 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 102 "bootcmd_usb=usb start " \ 103 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 104 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 105 "&& setenv ramdisk_len ${filesize} " \ 106 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 107 "&& bootz ${kernel_addr} " \ 108 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 109 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 110 "eraseenv=sf probe 0 " \ 111 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 112 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 113 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 114 "setenv autoload no " \ 115 "&& bootp " \ 116 "&& setenv ncip " \ 117 "&& setenv autoload ${autoload_old}; " \ 118 "setenv autoload_old\0" \ 119 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 120 "setenv ncip; setenv gatewayip; setenv ethact; " \ 121 "setenv bootfile; setenv dnsip; " \ 122 "setenv bootsource legacy; run ser\0" \ 123 "restore_env=run standard_env; saveenv; reset\0" \ 124 "ser=setenv stdin serial; setenv stdout serial; " \ 125 "setenv stderr serial\0" \ 126 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 127 "stdin=serial\0" \ 128 "stdout=serial\0" \ 129 "stderr=serial\0" 130 131 /* 132 * Ethernet Driver configuration 133 */ 134 #ifdef CONFIG_CMD_NET 135 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 136 #define CONFIG_PHY_BASE_ADR 7 137 #undef CONFIG_RESET_PHY_R 138 #endif /* CONFIG_CMD_NET */ 139 140 #ifdef CONFIG_IDE 141 #undef CONFIG_SYS_IDE_MAXBUS 142 #define CONFIG_SYS_IDE_MAXBUS 1 143 #undef CONFIG_SYS_IDE_MAXDEVICE 144 #define CONFIG_SYS_IDE_MAXDEVICE 1 145 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 146 #define CONFIG_SYS_64BIT_LBA 147 #endif 148 149 #endif /* _CONFIG_LSXL_H */ 150