1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 12 /* 13 * Version number information 14 */ 15 #if defined(CONFIG_LSCHLV2) 16 #define CONFIG_IDENT_STRING " LS-CHLv2" 17 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 18 #define CONFIG_MACH_TYPE 3006 19 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 20 #elif defined(CONFIG_LSXHL) 21 #define CONFIG_IDENT_STRING " LS-XHL" 22 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 23 #define CONFIG_MACH_TYPE 2663 24 /* CONFIG_SYS_TCLK is 200000000 by default */ 25 #else 26 #error "unknown board" 27 #endif 28 29 /* 30 * General configuration options 31 */ 32 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 33 #define CONFIG_KW88F6281 /* SOC Name */ 34 35 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 36 #define CONFIG_MISC_INIT_R 37 #define CONFIG_SHOW_BOOT_PROGRESS 38 39 #define CONFIG_KIRKWOOD_GPIO 40 41 #define CONFIG_SYS_NO_FLASH 42 #define CONFIG_SYS_HUSH_PARSER 43 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 44 #define CONFIG_SYS_CONSOLE_INFO_QUIET 45 46 /* 47 * Enable u-boot API for standalone programs. 48 */ 49 #define CONFIG_API 50 51 /* 52 * Commands configuration 53 */ 54 #define CONFIG_CMD_BOOTZ 55 #define CONFIG_CMD_DHCP 56 #define CONFIG_CMD_ENV 57 #define CONFIG_CMD_EXT2 58 #define CONFIG_CMD_FAT 59 #define CONFIG_CMD_IDE 60 #define CONFIG_CMD_PING 61 #define CONFIG_CMD_PING 62 #define CONFIG_CMD_SF 63 #define CONFIG_CMD_SPI 64 #define CONFIG_CMD_USB 65 #define CONFIG_CMD_FS_GENERIC 66 67 #define CONFIG_DOS_PARTITION 68 #define CONFIG_EFI_PARTITION 69 70 /* 71 * mv-common.h should be defined after CMD configs since it used them 72 * to enable certain macros 73 */ 74 #include "mv-common.h" 75 76 /* loading initramfs images without uimage header */ 77 #define CONFIG_SUPPORT_RAW_INITRD 78 79 /* ST M25P40 */ 80 #undef CONFIG_ENV_SPI_MAX_HZ 81 #define CONFIG_ENV_SPI_MAX_HZ 25000000 82 #undef CONFIG_SF_DEFAULT_SPEED 83 #define CONFIG_SF_DEFAULT_SPEED 25000000 84 85 86 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 87 88 /* 89 * Environment variables configurations 90 */ 91 #ifdef CONFIG_SPI_FLASH 92 #define CONFIG_SYS_MAX_FLASH_BANKS 1 93 #define CONFIG_SYS_MAX_FLASH_SECT 8 94 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 95 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 96 #else 97 #define CONFIG_ENV_IS_NOWHERE 98 #endif 99 100 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 101 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 102 103 /* 104 * Default environment variables 105 */ 106 #define CONFIG_LOADADDR 0x00800000 107 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 108 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 109 110 #if defined(CONFIG_LSXHL) 111 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 112 #elif defined(CONFIG_LSCHLV2) 113 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 114 #else 115 #error "Unsupported board" 116 #endif 117 118 #define CONFIG_EXTRA_ENV_SETTINGS \ 119 "bootsource=legacy\0" \ 120 "hdpart=0:1\0" \ 121 "kernel_addr=0x00800000\0" \ 122 "ramdisk_addr=0x01000000\0" \ 123 "fdt_addr=0x00ff0000\0" \ 124 "bootcmd_legacy=ide reset " \ 125 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 126 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 127 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 128 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 129 "&& tftpboot ${ramdisk_addr} initrd.img " \ 130 "&& setenv ramdisk_len ${filesize} " \ 131 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 132 "&& bootz ${kernel_addr} " \ 133 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 134 "bootcmd_hdd=ide reset " \ 135 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 136 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 137 "&& setenv ramdisk_len ${filesize} " \ 138 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 139 "&& bootz ${kernel_addr} " \ 140 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 141 "bootcmd_usb=usb start " \ 142 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 143 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 144 "&& setenv ramdisk_len ${filesize} " \ 145 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 146 "&& bootz ${kernel_addr} " \ 147 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 148 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 149 "eraseenv=sf probe 0 " \ 150 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 151 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 152 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 153 "setenv autoload no " \ 154 "&& bootp " \ 155 "&& setenv ncip " \ 156 "&& setenv autoload ${autoload_old}; " \ 157 "setenv autoload_old\0" \ 158 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 159 "setenv ncip; setenv gatewayip; setenv ethact; " \ 160 "setenv bootfile; setenv dnsip; " \ 161 "setenv bootsource legacy; run ser\0" \ 162 "restore_env=run standard_env; saveenv; reset\0" \ 163 "ser=setenv stdin serial; setenv stdout serial; " \ 164 "setenv stderr serial\0" \ 165 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 166 "stdin=serial\0" \ 167 "stdout=serial\0" \ 168 "stderr=serial\0" 169 170 /* 171 * Ethernet Driver configuration 172 */ 173 #ifdef CONFIG_CMD_NET 174 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 175 #define CONFIG_PHY_BASE_ADR 7 176 #undef CONFIG_RESET_PHY_R 177 #endif /* CONFIG_CMD_NET */ 178 179 #ifdef CONFIG_CMD_IDE 180 #undef CONFIG_IDE_LED 181 #undef CONFIG_SYS_IDE_MAXBUS 182 #define CONFIG_SYS_IDE_MAXBUS 1 183 #undef CONFIG_SYS_IDE_MAXDEVICE 184 #define CONFIG_SYS_IDE_MAXDEVICE 1 185 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 186 #define CONFIG_SYS_64BIT_LBA 187 #endif 188 189 #endif /* _CONFIG_LSXL_H */ 190