1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 /* 12 * Version number information 13 */ 14 #if defined(CONFIG_LSCHLV2) 15 #define CONFIG_IDENT_STRING " LS-CHLv2" 16 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 17 #define CONFIG_MACH_TYPE 3006 18 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 19 #elif defined(CONFIG_LSXHL) 20 #define CONFIG_IDENT_STRING " LS-XHL" 21 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 22 #define CONFIG_MACH_TYPE 2663 23 /* CONFIG_SYS_TCLK is 200000000 by default */ 24 #else 25 #error "unknown board" 26 #endif 27 28 /* 29 * General configuration options 30 */ 31 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 32 #define CONFIG_KW88F6281 /* SOC Name */ 33 34 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 35 #define CONFIG_MISC_INIT_R 36 #define CONFIG_SHOW_BOOT_PROGRESS 37 38 #define CONFIG_KIRKWOOD_GPIO 39 40 #define CONFIG_SYS_NO_FLASH 41 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 42 #define CONFIG_SYS_CONSOLE_INFO_QUIET 43 44 /* 45 * Enable u-boot API for standalone programs. 46 */ 47 #define CONFIG_API 48 49 /* 50 * Commands configuration 51 */ 52 #define CONFIG_CMD_ENV 53 #define CONFIG_CMD_IDE 54 55 #define CONFIG_DOS_PARTITION 56 #define CONFIG_EFI_PARTITION 57 58 /* 59 * mv-common.h should be defined after CMD configs since it used them 60 * to enable certain macros 61 */ 62 #include "mv-common.h" 63 64 /* loading initramfs images without uimage header */ 65 #define CONFIG_SUPPORT_RAW_INITRD 66 67 /* ST M25P40 */ 68 #undef CONFIG_ENV_SPI_MAX_HZ 69 #define CONFIG_ENV_SPI_MAX_HZ 25000000 70 #undef CONFIG_SF_DEFAULT_SPEED 71 #define CONFIG_SF_DEFAULT_SPEED 25000000 72 73 /* 74 * Environment variables configurations 75 */ 76 #ifdef CONFIG_SPI_FLASH 77 #define CONFIG_SYS_MAX_FLASH_BANKS 1 78 #define CONFIG_SYS_MAX_FLASH_SECT 8 79 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 80 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 81 #else 82 #define CONFIG_ENV_IS_NOWHERE 83 #endif 84 85 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 86 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 87 88 /* 89 * Default environment variables 90 */ 91 #define CONFIG_LOADADDR 0x00800000 92 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 93 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 94 95 #if defined(CONFIG_LSXHL) 96 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 97 #elif defined(CONFIG_LSCHLV2) 98 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 99 #else 100 #error "Unsupported board" 101 #endif 102 103 #define CONFIG_EXTRA_ENV_SETTINGS \ 104 "bootsource=legacy\0" \ 105 "hdpart=0:1\0" \ 106 "kernel_addr=0x00800000\0" \ 107 "ramdisk_addr=0x01000000\0" \ 108 "fdt_addr=0x00ff0000\0" \ 109 "bootcmd_legacy=ide reset " \ 110 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 111 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 112 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 113 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 114 "&& tftpboot ${ramdisk_addr} initrd.img " \ 115 "&& setenv ramdisk_len ${filesize} " \ 116 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 117 "&& bootz ${kernel_addr} " \ 118 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 119 "bootcmd_hdd=ide reset " \ 120 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 121 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 122 "&& setenv ramdisk_len ${filesize} " \ 123 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 124 "&& bootz ${kernel_addr} " \ 125 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 126 "bootcmd_usb=usb start " \ 127 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 128 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 129 "&& setenv ramdisk_len ${filesize} " \ 130 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 131 "&& bootz ${kernel_addr} " \ 132 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 133 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 134 "eraseenv=sf probe 0 " \ 135 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 136 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 137 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 138 "setenv autoload no " \ 139 "&& bootp " \ 140 "&& setenv ncip " \ 141 "&& setenv autoload ${autoload_old}; " \ 142 "setenv autoload_old\0" \ 143 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 144 "setenv ncip; setenv gatewayip; setenv ethact; " \ 145 "setenv bootfile; setenv dnsip; " \ 146 "setenv bootsource legacy; run ser\0" \ 147 "restore_env=run standard_env; saveenv; reset\0" \ 148 "ser=setenv stdin serial; setenv stdout serial; " \ 149 "setenv stderr serial\0" \ 150 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 151 "stdin=serial\0" \ 152 "stdout=serial\0" \ 153 "stderr=serial\0" 154 155 /* 156 * Ethernet Driver configuration 157 */ 158 #ifdef CONFIG_CMD_NET 159 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 160 #define CONFIG_PHY_BASE_ADR 7 161 #undef CONFIG_RESET_PHY_R 162 #endif /* CONFIG_CMD_NET */ 163 164 #ifdef CONFIG_CMD_IDE 165 #undef CONFIG_IDE_LED 166 #undef CONFIG_SYS_IDE_MAXBUS 167 #define CONFIG_SYS_IDE_MAXBUS 1 168 #undef CONFIG_SYS_IDE_MAXDEVICE 169 #define CONFIG_SYS_IDE_MAXDEVICE 1 170 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 171 #define CONFIG_SYS_64BIT_LBA 172 #endif 173 174 #endif /* _CONFIG_LSXL_H */ 175