1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (c) 2012 Michael Walle 4 * Michael Walle <michael@walle.cc> 5 */ 6 7 #ifndef _CONFIG_LSXL_H 8 #define _CONFIG_LSXL_H 9 10 /* 11 * Version number information 12 */ 13 #if defined(CONFIG_LSCHLV2) 14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 15 #define CONFIG_MACH_TYPE 3006 16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 17 #elif defined(CONFIG_LSXHL) 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 19 #define CONFIG_MACH_TYPE 2663 20 /* CONFIG_SYS_TCLK is 200000000 by default */ 21 #else 22 #error "unknown board" 23 #endif 24 25 /* 26 * General configuration options 27 */ 28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 /* SOC Name */ 30 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 32 #define CONFIG_MISC_INIT_R 33 #define CONFIG_SHOW_BOOT_PROGRESS 34 35 #define CONFIG_KIRKWOOD_GPIO 36 37 /* 38 * Commands configuration 39 */ 40 41 /* 42 * mv-common.h should be defined after CMD configs since it used them 43 * to enable certain macros 44 */ 45 #include "mv-common.h" 46 47 /* loading initramfs images without uimage header */ 48 49 /* ST M25P40 */ 50 #undef CONFIG_ENV_SPI_MAX_HZ 51 #define CONFIG_ENV_SPI_MAX_HZ 25000000 52 #undef CONFIG_SF_DEFAULT_SPEED 53 #define CONFIG_SF_DEFAULT_SPEED 25000000 54 55 /* 56 * Environment variables configurations 57 */ 58 #ifdef CONFIG_SPI_FLASH 59 #define CONFIG_SYS_MAX_FLASH_BANKS 1 60 #define CONFIG_SYS_MAX_FLASH_SECT 8 61 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 62 #endif 63 64 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 65 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 66 67 /* 68 * Default environment variables 69 */ 70 #define CONFIG_LOADADDR 0x00800000 71 72 #if defined(CONFIG_LSXHL) 73 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 74 #elif defined(CONFIG_LSCHLV2) 75 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 76 #else 77 #error "Unsupported board" 78 #endif 79 80 #define CONFIG_EXTRA_ENV_SETTINGS \ 81 "bootsource=legacy\0" \ 82 "hdpart=0:1\0" \ 83 "kernel_addr=0x00800000\0" \ 84 "ramdisk_addr=0x01000000\0" \ 85 "fdt_addr=0x00ff0000\0" \ 86 "bootcmd_legacy=ide reset " \ 87 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 88 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 89 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 90 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 91 "&& tftpboot ${ramdisk_addr} initrd.img " \ 92 "&& setenv ramdisk_len ${filesize} " \ 93 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 94 "&& bootz ${kernel_addr} " \ 95 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 96 "bootcmd_hdd=ide reset " \ 97 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 98 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 99 "&& setenv ramdisk_len ${filesize} " \ 100 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 101 "&& bootz ${kernel_addr} " \ 102 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 103 "bootcmd_usb=usb start " \ 104 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 105 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 106 "&& setenv ramdisk_len ${filesize} " \ 107 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 108 "&& bootz ${kernel_addr} " \ 109 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 110 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 111 "eraseenv=sf probe 0 " \ 112 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 113 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 114 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 115 "setenv autoload no " \ 116 "&& bootp " \ 117 "&& setenv ncip " \ 118 "&& setenv autoload ${autoload_old}; " \ 119 "setenv autoload_old\0" \ 120 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 121 "setenv ncip; setenv gatewayip; setenv ethact; " \ 122 "setenv bootfile; setenv dnsip; " \ 123 "setenv bootsource legacy; run ser\0" \ 124 "restore_env=run standard_env; saveenv; reset\0" \ 125 "ser=setenv stdin serial; setenv stdout serial; " \ 126 "setenv stderr serial\0" \ 127 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 128 "stdin=serial\0" \ 129 "stdout=serial\0" \ 130 "stderr=serial\0" 131 132 /* 133 * Ethernet Driver configuration 134 */ 135 #ifdef CONFIG_CMD_NET 136 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 137 #define CONFIG_PHY_BASE_ADR 7 138 #undef CONFIG_RESET_PHY_R 139 #endif /* CONFIG_CMD_NET */ 140 141 #ifdef CONFIG_IDE 142 #undef CONFIG_SYS_IDE_MAXBUS 143 #define CONFIG_SYS_IDE_MAXBUS 1 144 #undef CONFIG_SYS_IDE_MAXDEVICE 145 #define CONFIG_SYS_IDE_MAXDEVICE 1 146 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 147 #define CONFIG_SYS_64BIT_LBA 148 #endif 149 150 #endif /* _CONFIG_LSXL_H */ 151