1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 /* 12 * Version number information 13 */ 14 #if defined(CONFIG_LSCHLV2) 15 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 16 #define CONFIG_MACH_TYPE 3006 17 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 18 #elif defined(CONFIG_LSXHL) 19 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 20 #define CONFIG_MACH_TYPE 2663 21 /* CONFIG_SYS_TCLK is 200000000 by default */ 22 #else 23 #error "unknown board" 24 #endif 25 26 /* 27 * General configuration options 28 */ 29 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 30 #define CONFIG_KW88F6281 /* SOC Name */ 31 32 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 33 #define CONFIG_MISC_INIT_R 34 #define CONFIG_SHOW_BOOT_PROGRESS 35 36 #define CONFIG_KIRKWOOD_GPIO 37 38 #define CONFIG_SYS_NO_FLASH 39 40 /* 41 * Enable u-boot API for standalone programs. 42 */ 43 #define CONFIG_API 44 45 /* 46 * Commands configuration 47 */ 48 #define CONFIG_CMD_ENV 49 #define CONFIG_CMD_IDE 50 51 #define CONFIG_DOS_PARTITION 52 #define CONFIG_EFI_PARTITION 53 54 /* 55 * mv-common.h should be defined after CMD configs since it used them 56 * to enable certain macros 57 */ 58 #include "mv-common.h" 59 60 /* loading initramfs images without uimage header */ 61 #define CONFIG_SUPPORT_RAW_INITRD 62 63 /* ST M25P40 */ 64 #undef CONFIG_ENV_SPI_MAX_HZ 65 #define CONFIG_ENV_SPI_MAX_HZ 25000000 66 #undef CONFIG_SF_DEFAULT_SPEED 67 #define CONFIG_SF_DEFAULT_SPEED 25000000 68 69 /* 70 * Environment variables configurations 71 */ 72 #ifdef CONFIG_SPI_FLASH 73 #define CONFIG_SYS_MAX_FLASH_BANKS 1 74 #define CONFIG_SYS_MAX_FLASH_SECT 8 75 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 76 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 77 #else 78 #define CONFIG_ENV_IS_NOWHERE 79 #endif 80 81 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 82 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 83 84 /* 85 * Default environment variables 86 */ 87 #define CONFIG_LOADADDR 0x00800000 88 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 89 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 90 91 #if defined(CONFIG_LSXHL) 92 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 93 #elif defined(CONFIG_LSCHLV2) 94 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 95 #else 96 #error "Unsupported board" 97 #endif 98 99 #define CONFIG_EXTRA_ENV_SETTINGS \ 100 "bootsource=legacy\0" \ 101 "hdpart=0:1\0" \ 102 "kernel_addr=0x00800000\0" \ 103 "ramdisk_addr=0x01000000\0" \ 104 "fdt_addr=0x00ff0000\0" \ 105 "bootcmd_legacy=ide reset " \ 106 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 107 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 108 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 109 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 110 "&& tftpboot ${ramdisk_addr} initrd.img " \ 111 "&& setenv ramdisk_len ${filesize} " \ 112 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 113 "&& bootz ${kernel_addr} " \ 114 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 115 "bootcmd_hdd=ide reset " \ 116 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 117 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 118 "&& setenv ramdisk_len ${filesize} " \ 119 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 120 "&& bootz ${kernel_addr} " \ 121 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 122 "bootcmd_usb=usb start " \ 123 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 124 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 125 "&& setenv ramdisk_len ${filesize} " \ 126 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 127 "&& bootz ${kernel_addr} " \ 128 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 129 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 130 "eraseenv=sf probe 0 " \ 131 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 132 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 133 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 134 "setenv autoload no " \ 135 "&& bootp " \ 136 "&& setenv ncip " \ 137 "&& setenv autoload ${autoload_old}; " \ 138 "setenv autoload_old\0" \ 139 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 140 "setenv ncip; setenv gatewayip; setenv ethact; " \ 141 "setenv bootfile; setenv dnsip; " \ 142 "setenv bootsource legacy; run ser\0" \ 143 "restore_env=run standard_env; saveenv; reset\0" \ 144 "ser=setenv stdin serial; setenv stdout serial; " \ 145 "setenv stderr serial\0" \ 146 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 147 "stdin=serial\0" \ 148 "stdout=serial\0" \ 149 "stderr=serial\0" 150 151 /* 152 * Ethernet Driver configuration 153 */ 154 #ifdef CONFIG_CMD_NET 155 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 156 #define CONFIG_PHY_BASE_ADR 7 157 #undef CONFIG_RESET_PHY_R 158 #endif /* CONFIG_CMD_NET */ 159 160 #ifdef CONFIG_CMD_IDE 161 #undef CONFIG_IDE_LED 162 #undef CONFIG_SYS_IDE_MAXBUS 163 #define CONFIG_SYS_IDE_MAXBUS 1 164 #undef CONFIG_SYS_IDE_MAXDEVICE 165 #define CONFIG_SYS_IDE_MAXDEVICE 1 166 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 167 #define CONFIG_SYS_64BIT_LBA 168 #endif 169 170 #endif /* _CONFIG_LSXL_H */ 171