1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (c) 2012 Michael Walle 4 * Michael Walle <michael@walle.cc> 5 */ 6 7 #ifndef _CONFIG_LSXL_H 8 #define _CONFIG_LSXL_H 9 10 /* 11 * Version number information 12 */ 13 #if defined(CONFIG_LSCHLV2) 14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 15 #define CONFIG_MACH_TYPE 3006 16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 17 #elif defined(CONFIG_LSXHL) 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 19 #define CONFIG_MACH_TYPE 2663 20 /* CONFIG_SYS_TCLK is 200000000 by default */ 21 #else 22 #error "unknown board" 23 #endif 24 25 /* 26 * General configuration options 27 */ 28 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 /* SOC Name */ 30 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 32 #define CONFIG_SHOW_BOOT_PROGRESS 33 34 #define CONFIG_KIRKWOOD_GPIO 35 36 /* 37 * Commands configuration 38 */ 39 40 /* 41 * mv-common.h should be defined after CMD configs since it used them 42 * to enable certain macros 43 */ 44 #include "mv-common.h" 45 46 /* loading initramfs images without uimage header */ 47 48 /* 49 * Environment variables configurations 50 */ 51 #ifdef CONFIG_SPI_FLASH 52 #define CONFIG_SYS_MAX_FLASH_BANKS 1 53 #define CONFIG_SYS_MAX_FLASH_SECT 8 54 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 55 #endif 56 57 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 58 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 59 60 /* 61 * Default environment variables 62 */ 63 #define CONFIG_LOADADDR 0x00800000 64 65 #if defined(CONFIG_LSXHL) 66 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 67 #elif defined(CONFIG_LSCHLV2) 68 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 69 #else 70 #error "Unsupported board" 71 #endif 72 73 #define CONFIG_EXTRA_ENV_SETTINGS \ 74 "bootsource=legacy\0" \ 75 "hdpart=0:1\0" \ 76 "kernel_addr=0x00800000\0" \ 77 "ramdisk_addr=0x01000000\0" \ 78 "fdt_addr=0x00ff0000\0" \ 79 "bootcmd_legacy=ide reset " \ 80 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 81 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 82 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 83 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 84 "&& tftpboot ${ramdisk_addr} initrd.img " \ 85 "&& setenv ramdisk_len ${filesize} " \ 86 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 87 "&& bootz ${kernel_addr} " \ 88 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 89 "bootcmd_hdd=ide reset " \ 90 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 91 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 92 "&& setenv ramdisk_len ${filesize} " \ 93 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 94 "&& bootz ${kernel_addr} " \ 95 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 96 "bootcmd_usb=usb start " \ 97 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 98 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 99 "&& setenv ramdisk_len ${filesize} " \ 100 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 101 "&& bootz ${kernel_addr} " \ 102 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 103 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 104 "eraseenv=sf probe 0 " \ 105 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 106 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 107 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 108 "setenv autoload no " \ 109 "&& bootp " \ 110 "&& setenv ncip " \ 111 "&& setenv autoload ${autoload_old}; " \ 112 "setenv autoload_old\0" \ 113 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 114 "setenv ncip; setenv gatewayip; setenv ethact; " \ 115 "setenv bootfile; setenv dnsip; " \ 116 "setenv bootsource legacy; run ser\0" \ 117 "restore_env=run standard_env; saveenv; reset\0" \ 118 "ser=setenv stdin serial; setenv stdout serial; " \ 119 "setenv stderr serial\0" \ 120 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 121 "stdin=serial\0" \ 122 "stdout=serial\0" \ 123 "stderr=serial\0" 124 125 /* 126 * Ethernet Driver configuration 127 */ 128 #ifdef CONFIG_CMD_NET 129 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 130 #define CONFIG_PHY_BASE_ADR 7 131 #undef CONFIG_RESET_PHY_R 132 #endif /* CONFIG_CMD_NET */ 133 134 #ifdef CONFIG_IDE 135 #undef CONFIG_SYS_IDE_MAXBUS 136 #define CONFIG_SYS_IDE_MAXBUS 1 137 #undef CONFIG_SYS_IDE_MAXDEVICE 138 #define CONFIG_SYS_IDE_MAXDEVICE 1 139 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 140 #define CONFIG_SYS_64BIT_LBA 141 #endif 142 143 #endif /* _CONFIG_LSXL_H */ 144