1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 #define CONFIG_SYS_GENERIC_BOARD 12 13 /* 14 * Version number information 15 */ 16 #if defined(CONFIG_LSCHLV2) 17 #define CONFIG_IDENT_STRING " LS-CHLv2" 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 19 #define CONFIG_MACH_TYPE 3006 20 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 21 #elif defined(CONFIG_LSXHL) 22 #define CONFIG_IDENT_STRING " LS-XHL" 23 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 24 #define CONFIG_MACH_TYPE 2663 25 /* CONFIG_SYS_TCLK is 200000000 by default */ 26 #else 27 #error "unknown board" 28 #endif 29 30 /* 31 * General configuration options 32 */ 33 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 34 #define CONFIG_KW88F6281 /* SOC Name */ 35 36 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 37 #define CONFIG_MISC_INIT_R 38 #define CONFIG_SHOW_BOOT_PROGRESS 39 40 #define CONFIG_KIRKWOOD_GPIO 41 #define CONFIG_OF_LIBFDT 42 43 #define CONFIG_SYS_NO_FLASH 44 #define CONFIG_SYS_HUSH_PARSER 45 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 46 #define CONFIG_SYS_CONSOLE_INFO_QUIET 47 48 /* 49 * Enable u-boot API for standalone programs. 50 */ 51 #define CONFIG_API 52 53 /* 54 * Commands configuration 55 */ 56 #define CONFIG_CMD_BOOTZ 57 #define CONFIG_CMD_DHCP 58 #define CONFIG_CMD_ELF 59 #define CONFIG_CMD_ENV 60 #define CONFIG_CMD_EXT2 61 #define CONFIG_CMD_FAT 62 #define CONFIG_CMD_IDE 63 #define CONFIG_CMD_PING 64 #define CONFIG_CMD_PING 65 #define CONFIG_CMD_SF 66 #define CONFIG_CMD_SPI 67 #define CONFIG_CMD_USB 68 #define CONFIG_CMD_FS_GENERIC 69 70 #define CONFIG_DOS_PARTITION 71 #define CONFIG_EFI_PARTITION 72 73 /* 74 * mv-common.h should be defined after CMD configs since it used them 75 * to enable certain macros 76 */ 77 #include "mv-common.h" 78 79 /* loading initramfs images without uimage header */ 80 #define CONFIG_SUPPORT_RAW_INITRD 81 82 /* ST M25P40 */ 83 #undef CONFIG_SPI_FLASH_MACRONIX 84 #define CONFIG_SPI_FLASH_STMICRO 85 #undef CONFIG_ENV_SPI_MAX_HZ 86 #define CONFIG_ENV_SPI_MAX_HZ 25000000 87 #undef CONFIG_SF_DEFAULT_SPEED 88 #define CONFIG_SF_DEFAULT_SPEED 25000000 89 90 91 #undef CONFIG_SYS_PROMPT 92 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 93 94 /* 95 * Environment variables configurations 96 */ 97 #ifdef CONFIG_SPI_FLASH 98 #define CONFIG_SYS_MAX_FLASH_BANKS 1 99 #define CONFIG_SYS_MAX_FLASH_SECT 8 100 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 101 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 102 #else 103 #define CONFIG_ENV_IS_NOWHERE 104 #endif 105 106 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 107 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 108 109 /* 110 * Default environment variables 111 */ 112 #define CONFIG_LOADADDR 0x00800000 113 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 114 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 115 116 #if defined(CONFIG_LSXHL) 117 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 118 #elif defined(CONFIG_LSCHLV2) 119 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 120 #else 121 #error "Unsupported board" 122 #endif 123 124 #define CONFIG_EXTRA_ENV_SETTINGS \ 125 "bootsource=legacy\0" \ 126 "hdpart=0:1\0" \ 127 "kernel_addr=0x00800000\0" \ 128 "ramdisk_addr=0x01000000\0" \ 129 "fdt_addr=0x00ff0000\0" \ 130 "bootcmd_legacy=ide reset " \ 131 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 132 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 133 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 134 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 135 "&& tftpboot ${ramdisk_addr} initrd.img " \ 136 "&& setenv ramdisk_len ${filesize} " \ 137 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 138 "&& bootz ${kernel_addr} " \ 139 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 140 "bootcmd_hdd=ide reset " \ 141 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 142 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 143 "&& setenv ramdisk_len ${filesize} " \ 144 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 145 "&& bootz ${kernel_addr} " \ 146 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 147 "bootcmd_usb=usb start " \ 148 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 149 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 150 "&& setenv ramdisk_len ${filesize} " \ 151 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 152 "&& bootz ${kernel_addr} " \ 153 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 154 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 155 "eraseenv=sf probe 0 " \ 156 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 157 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 158 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 159 "setenv autoload no " \ 160 "&& bootp " \ 161 "&& setenv ncip " \ 162 "&& setenv autoload ${autoload_old}; " \ 163 "setenv autoload_old\0" \ 164 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 165 "setenv ncip; setenv gatewayip; setenv ethact; " \ 166 "setenv bootfile; setenv dnsip; " \ 167 "setenv bootsource legacy; run ser\0" \ 168 "restore_env=run standard_env; saveenv; reset\0" \ 169 "ser=setenv stdin serial; setenv stdout serial; " \ 170 "setenv stderr serial\0" \ 171 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 172 "stdin=serial\0" \ 173 "stdout=serial\0" \ 174 "stderr=serial\0" 175 176 /* 177 * Ethernet Driver configuration 178 */ 179 #ifdef CONFIG_CMD_NET 180 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 181 #define CONFIG_PHY_BASE_ADR 7 182 #undef CONFIG_RESET_PHY_R 183 #endif /* CONFIG_CMD_NET */ 184 185 #ifdef CONFIG_CMD_IDE 186 #undef CONFIG_IDE_LED 187 #undef CONFIG_SYS_IDE_MAXBUS 188 #define CONFIG_SYS_IDE_MAXBUS 1 189 #undef CONFIG_SYS_IDE_MAXDEVICE 190 #define CONFIG_SYS_IDE_MAXDEVICE 1 191 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 192 #define CONFIG_SYS_64BIT_LBA 193 #endif 194 195 #endif /* _CONFIG_LSXL_H */ 196