1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 12 /* 13 * Version number information 14 */ 15 #if defined(CONFIG_LSCHLV2) 16 #define CONFIG_IDENT_STRING " LS-CHLv2" 17 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 18 #define CONFIG_MACH_TYPE 3006 19 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 20 #elif defined(CONFIG_LSXHL) 21 #define CONFIG_IDENT_STRING " LS-XHL" 22 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 23 #define CONFIG_MACH_TYPE 2663 24 /* CONFIG_SYS_TCLK is 200000000 by default */ 25 #else 26 #error "unknown board" 27 #endif 28 29 /* 30 * General configuration options 31 */ 32 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 33 #define CONFIG_KW88F6281 /* SOC Name */ 34 35 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 36 #define CONFIG_MISC_INIT_R 37 #define CONFIG_SHOW_BOOT_PROGRESS 38 39 #define CONFIG_KIRKWOOD_GPIO 40 #define CONFIG_OF_LIBFDT 41 42 #define CONFIG_SYS_NO_FLASH 43 #define CONFIG_SYS_HUSH_PARSER 44 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 45 #define CONFIG_SYS_CONSOLE_INFO_QUIET 46 47 /* 48 * Enable u-boot API for standalone programs. 49 */ 50 #define CONFIG_API 51 52 /* 53 * Commands configuration 54 */ 55 #define CONFIG_CMD_BOOTZ 56 #define CONFIG_CMD_DHCP 57 #define CONFIG_CMD_ENV 58 #define CONFIG_CMD_EXT2 59 #define CONFIG_CMD_FAT 60 #define CONFIG_CMD_IDE 61 #define CONFIG_CMD_PING 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_SF 64 #define CONFIG_CMD_SPI 65 #define CONFIG_CMD_USB 66 #define CONFIG_CMD_FS_GENERIC 67 68 #define CONFIG_DOS_PARTITION 69 #define CONFIG_EFI_PARTITION 70 71 /* 72 * mv-common.h should be defined after CMD configs since it used them 73 * to enable certain macros 74 */ 75 #include "mv-common.h" 76 77 /* loading initramfs images without uimage header */ 78 #define CONFIG_SUPPORT_RAW_INITRD 79 80 /* ST M25P40 */ 81 #undef CONFIG_ENV_SPI_MAX_HZ 82 #define CONFIG_ENV_SPI_MAX_HZ 25000000 83 #undef CONFIG_SF_DEFAULT_SPEED 84 #define CONFIG_SF_DEFAULT_SPEED 25000000 85 86 87 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 88 89 /* 90 * Environment variables configurations 91 */ 92 #ifdef CONFIG_SPI_FLASH 93 #define CONFIG_SYS_MAX_FLASH_BANKS 1 94 #define CONFIG_SYS_MAX_FLASH_SECT 8 95 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 96 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 97 #else 98 #define CONFIG_ENV_IS_NOWHERE 99 #endif 100 101 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 102 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 103 104 /* 105 * Default environment variables 106 */ 107 #define CONFIG_LOADADDR 0x00800000 108 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 109 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 110 111 #if defined(CONFIG_LSXHL) 112 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 113 #elif defined(CONFIG_LSCHLV2) 114 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 115 #else 116 #error "Unsupported board" 117 #endif 118 119 #define CONFIG_EXTRA_ENV_SETTINGS \ 120 "bootsource=legacy\0" \ 121 "hdpart=0:1\0" \ 122 "kernel_addr=0x00800000\0" \ 123 "ramdisk_addr=0x01000000\0" \ 124 "fdt_addr=0x00ff0000\0" \ 125 "bootcmd_legacy=ide reset " \ 126 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 127 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 128 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 129 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 130 "&& tftpboot ${ramdisk_addr} initrd.img " \ 131 "&& setenv ramdisk_len ${filesize} " \ 132 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 133 "&& bootz ${kernel_addr} " \ 134 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 135 "bootcmd_hdd=ide reset " \ 136 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 137 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 138 "&& setenv ramdisk_len ${filesize} " \ 139 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 140 "&& bootz ${kernel_addr} " \ 141 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 142 "bootcmd_usb=usb start " \ 143 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 144 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 145 "&& setenv ramdisk_len ${filesize} " \ 146 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 147 "&& bootz ${kernel_addr} " \ 148 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 149 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 150 "eraseenv=sf probe 0 " \ 151 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 152 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 153 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 154 "setenv autoload no " \ 155 "&& bootp " \ 156 "&& setenv ncip " \ 157 "&& setenv autoload ${autoload_old}; " \ 158 "setenv autoload_old\0" \ 159 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 160 "setenv ncip; setenv gatewayip; setenv ethact; " \ 161 "setenv bootfile; setenv dnsip; " \ 162 "setenv bootsource legacy; run ser\0" \ 163 "restore_env=run standard_env; saveenv; reset\0" \ 164 "ser=setenv stdin serial; setenv stdout serial; " \ 165 "setenv stderr serial\0" \ 166 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 167 "stdin=serial\0" \ 168 "stdout=serial\0" \ 169 "stderr=serial\0" 170 171 /* 172 * Ethernet Driver configuration 173 */ 174 #ifdef CONFIG_CMD_NET 175 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 176 #define CONFIG_PHY_BASE_ADR 7 177 #undef CONFIG_RESET_PHY_R 178 #endif /* CONFIG_CMD_NET */ 179 180 #ifdef CONFIG_CMD_IDE 181 #undef CONFIG_IDE_LED 182 #undef CONFIG_SYS_IDE_MAXBUS 183 #define CONFIG_SYS_IDE_MAXBUS 1 184 #undef CONFIG_SYS_IDE_MAXDEVICE 185 #define CONFIG_SYS_IDE_MAXDEVICE 1 186 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 187 #define CONFIG_SYS_64BIT_LBA 188 #endif 189 190 #endif /* _CONFIG_LSXL_H */ 191