1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 /* 12 * Version number information 13 */ 14 #if defined(CONFIG_LSCHLV2) 15 #define CONFIG_IDENT_STRING " LS-CHLv2" 16 #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 17 #define CONFIG_MACH_TYPE 3006 18 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 19 #elif defined(CONFIG_LSXHL) 20 #define CONFIG_IDENT_STRING " LS-XHL" 21 #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 22 #define CONFIG_MACH_TYPE 2663 23 /* CONFIG_SYS_TCLK is 200000000 by default */ 24 #else 25 #error "unknown board" 26 #endif 27 28 /* 29 * General configuration options 30 */ 31 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 32 #define CONFIG_KIRKWOOD /* SOC Family Name */ 33 #define CONFIG_KW88F6281 /* SOC Name */ 34 35 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 36 #define CONFIG_MISC_INIT_R 37 #define CONFIG_SHOW_BOOT_PROGRESS 38 39 #define CONFIG_RANDOM_MACADDR 40 #define CONFIG_KIRKWOOD_GPIO 41 #define CONFIG_OF_LIBFDT 42 43 #define CONFIG_SYS_NO_FLASH 44 #define CONFIG_SYS_HUSH_PARSER 45 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 46 #define CONFIG_SYS_CONSOLE_INFO_QUIET 47 48 /* 49 * Enable u-boot API for standalone programs. 50 */ 51 #define CONFIG_API 52 53 /* 54 * Commands configuration 55 */ 56 #include <config_cmd_default.h> 57 #define CONFIG_CMD_DHCP 58 #define CONFIG_CMD_ELF 59 #define CONFIG_CMD_ENV 60 #define CONFIG_CMD_EXT2 61 #define CONFIG_CMD_FAT 62 #define CONFIG_CMD_IDE 63 #define CONFIG_CMD_PING 64 #define CONFIG_CMD_PING 65 #define CONFIG_CMD_SF 66 #define CONFIG_CMD_SPI 67 #define CONFIG_CMD_USB 68 69 #define CONFIG_DOS_PARTITION 70 #define CONFIG_EFI_PARTITION 71 72 /* 73 * mv-common.h should be defined after CMD configs since it used them 74 * to enable certain macros 75 */ 76 #include "mv-common.h" 77 78 /* ST M25P40 */ 79 #undef CONFIG_SPI_FLASH_MACRONIX 80 #define CONFIG_SPI_FLASH_STMICRO 81 #undef CONFIG_ENV_SPI_MAX_HZ 82 #define CONFIG_ENV_SPI_MAX_HZ 25000000 83 #undef CONFIG_SF_DEFAULT_SPEED 84 #define CONFIG_SF_DEFAULT_SPEED 25000000 85 86 87 #undef CONFIG_SYS_PROMPT 88 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 89 90 /* 91 * Environment variables configurations 92 */ 93 #ifdef CONFIG_SPI_FLASH 94 #define CONFIG_SYS_MAX_FLASH_BANKS 1 95 #define CONFIG_SYS_MAX_FLASH_SECT 8 96 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 97 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 98 #else 99 #define CONFIG_ENV_IS_NOWHERE 100 #endif 101 102 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 103 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 104 105 /* 106 * Default environment variables 107 */ 108 #define CONFIG_LOADADDR 0x00800000 109 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 110 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 111 #define CONFIG_EXTRA_ENV_SETTINGS \ 112 "bootsource=hdd\0" \ 113 "hdpart=0:1\0" \ 114 "bootcmd_net=bootp 0x00100000 uImage " \ 115 "&& tftpboot 0x00800000 uInitrd " \ 116 "&& bootm 0x00100000 0x00800000\0" \ 117 "bootcmd_hdd=ide reset " \ 118 "&& ext2load ide ${hdpart} 0x00100000 /uImage " \ 119 "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \ 120 "&& bootm 0x00100000 0x00800000\0" \ 121 "bootcmd_usb=usb start " \ 122 "&& fatload usb 0:1 0x00100000 /uImage " \ 123 "&& fatload usb 0:1 0x00800000 /uInitrd " \ 124 "&& bootm 0x00100000 0x00800000\0" \ 125 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 126 "eraseenv=sf probe 0 " \ 127 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 128 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 129 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 130 "setenv autoload no " \ 131 "&& bootp " \ 132 "&& setenv ncip " \ 133 "&& setenv autoload ${autoload_old}; " \ 134 "setenv autoload_old\0" \ 135 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 136 "setenv ncip; setenv gatewayip; setenv ethact; " \ 137 "setenv bootfile; setenv dnsip; " \ 138 "setenv bootsource hdd; run ser\0" \ 139 "restore_env=run standard_env; saveenv; reset\0" \ 140 "ser=setenv stdin serial; setenv stdout serial; " \ 141 "setenv stderr serial\0" \ 142 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 143 "stdin=serial\0" \ 144 "stdout=serial\0" \ 145 "stderr=serial\0" 146 147 /* 148 * Ethernet Driver configuration 149 */ 150 #ifdef CONFIG_CMD_NET 151 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 152 #define CONFIG_PHY_BASE_ADR 7 153 #undef CONFIG_RESET_PHY_R 154 #endif /* CONFIG_CMD_NET */ 155 156 #ifdef CONFIG_CMD_IDE 157 #undef CONFIG_IDE_LED 158 #undef CONFIG_SYS_IDE_MAXBUS 159 #define CONFIG_SYS_IDE_MAXBUS 1 160 #undef CONFIG_SYS_IDE_MAXDEVICE 161 #define CONFIG_SYS_IDE_MAXDEVICE 1 162 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 163 #endif 164 165 #endif /* _CONFIG_LSXL_H */ 166