xref: /openbmc/u-boot/include/configs/lsxl.h (revision 1b5f4dc9)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (c) 2012 Michael Walle
4  * Michael Walle <michael@walle.cc>
5  */
6 
7 #ifndef _CONFIG_LSXL_H
8 #define _CONFIG_LSXL_H
9 
10 /*
11  * Version number information
12  */
13 #if defined(CONFIG_LSCHLV2)
14 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
15 #define CONFIG_MACH_TYPE 3006
16 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
17 #elif defined(CONFIG_LSXHL)
18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
19 #define CONFIG_MACH_TYPE 2663
20 /* CONFIG_SYS_TCLK is 200000000 by default */
21 #else
22 #error "unknown board"
23 #endif
24 
25 /*
26  * General configuration options
27  */
28 #define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
29 #define CONFIG_KW88F6281		/* SOC Name */
30 
31 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
32 #define CONFIG_SHOW_BOOT_PROGRESS
33 
34 #define CONFIG_KIRKWOOD_GPIO
35 
36 /*
37  * Commands configuration
38  */
39 
40 /*
41  * mv-common.h should be defined after CMD configs since it used them
42  * to enable certain macros
43  */
44 #include "mv-common.h"
45 
46 /* loading initramfs images without uimage header */
47 
48 /* ST M25P40 */
49 #undef CONFIG_ENV_SPI_MAX_HZ
50 #define CONFIG_ENV_SPI_MAX_HZ		25000000
51 #undef CONFIG_SF_DEFAULT_SPEED
52 #define CONFIG_SF_DEFAULT_SPEED		25000000
53 
54 /*
55  *  Environment variables configurations
56  */
57 #ifdef CONFIG_SPI_FLASH
58 #define CONFIG_SYS_MAX_FLASH_BANKS	1
59 #define CONFIG_SYS_MAX_FLASH_SECT	8
60 #define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
61 #endif
62 
63 #define CONFIG_ENV_SIZE			0x10000 /* 64k */
64 #define CONFIG_ENV_OFFSET		0x70000 /* env starts here */
65 
66 /*
67  * Default environment variables
68  */
69 #define CONFIG_LOADADDR		0x00800000
70 
71 #if defined(CONFIG_LSXHL)
72 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
73 #elif defined(CONFIG_LSCHLV2)
74 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
75 #else
76 #error "Unsupported board"
77 #endif
78 
79 #define CONFIG_EXTRA_ENV_SETTINGS					\
80 	"bootsource=legacy\0"						\
81 	"hdpart=0:1\0"							\
82 	"kernel_addr=0x00800000\0"					\
83 	"ramdisk_addr=0x01000000\0"					\
84 	"fdt_addr=0x00ff0000\0"						\
85 	"bootcmd_legacy=ide reset "					\
86 		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
87 		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
88 		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
89 	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
90 		"&& tftpboot ${ramdisk_addr} initrd.img "		\
91 		"&& setenv ramdisk_len ${filesize} "			\
92 		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
93 		"&& bootz ${kernel_addr} "				\
94 			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
95 	"bootcmd_hdd=ide reset "					\
96 		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
97 		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
98 		"&& setenv ramdisk_len ${filesize} "			\
99 		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
100 		"&& bootz ${kernel_addr} "				\
101 			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
102 	"bootcmd_usb=usb start "					\
103 		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
104 		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
105 		"&& setenv ramdisk_len ${filesize} "			\
106 		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
107 		"&& bootz ${kernel_addr} "				\
108 			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
109 	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
110 	"eraseenv=sf probe 0 "						\
111 		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
112 			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
113 	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
114 		"setenv autoload no "					\
115 		"&& bootp "						\
116 		"&& setenv ncip "					\
117 		"&& setenv autoload ${autoload_old}; "			\
118 		"setenv autoload_old\0"					\
119 	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
120 		"setenv ncip; setenv gatewayip; setenv ethact; "	\
121 		"setenv bootfile; setenv dnsip; "			\
122 		"setenv bootsource legacy; run ser\0"			\
123 	"restore_env=run standard_env; saveenv; reset\0"		\
124 	"ser=setenv stdin serial; setenv stdout serial; "		\
125 		"setenv stderr serial\0"				\
126 	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
127 	"stdin=serial\0"						\
128 	"stdout=serial\0"						\
129 	"stderr=serial\0"
130 
131 /*
132  * Ethernet Driver configuration
133  */
134 #ifdef CONFIG_CMD_NET
135 #define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
136 #define CONFIG_PHY_BASE_ADR		7
137 #undef CONFIG_RESET_PHY_R
138 #endif /* CONFIG_CMD_NET */
139 
140 #ifdef CONFIG_IDE
141 #undef CONFIG_SYS_IDE_MAXBUS
142 #define CONFIG_SYS_IDE_MAXBUS		1
143 #undef CONFIG_SYS_IDE_MAXDEVICE
144 #define CONFIG_SYS_IDE_MAXDEVICE	1
145 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
146 #define CONFIG_SYS_64BIT_LBA
147 #endif
148 
149 #endif /* _CONFIG_LSXL_H */
150