1 /* 2 * Copyright (c) 2012 Michael Walle 3 * Michael Walle <michael@walle.cc> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_LSXL_H 9 #define _CONFIG_LSXL_H 10 11 #define CONFIG_SYS_GENERIC_BOARD 12 13 /* 14 * Version number information 15 */ 16 #if defined(CONFIG_LSCHLV2) 17 #define CONFIG_IDENT_STRING " LS-CHLv2" 18 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg 19 #define CONFIG_MACH_TYPE 3006 20 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ 21 #elif defined(CONFIG_LSXHL) 22 #define CONFIG_IDENT_STRING " LS-XHL" 23 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg 24 #define CONFIG_MACH_TYPE 2663 25 /* CONFIG_SYS_TCLK is 200000000 by default */ 26 #else 27 #error "unknown board" 28 #endif 29 30 /* 31 * General configuration options 32 */ 33 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 34 #define CONFIG_KW88F6281 /* SOC Name */ 35 36 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 37 #define CONFIG_MISC_INIT_R 38 #define CONFIG_SHOW_BOOT_PROGRESS 39 40 #define CONFIG_KIRKWOOD_GPIO 41 #define CONFIG_OF_LIBFDT 42 43 #define CONFIG_SYS_NO_FLASH 44 #define CONFIG_SYS_HUSH_PARSER 45 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 46 #define CONFIG_SYS_CONSOLE_INFO_QUIET 47 48 /* 49 * Enable u-boot API for standalone programs. 50 */ 51 #define CONFIG_API 52 53 /* 54 * Commands configuration 55 */ 56 #define CONFIG_CMD_BOOTZ 57 #define CONFIG_CMD_DHCP 58 #define CONFIG_CMD_ELF 59 #define CONFIG_CMD_ENV 60 #define CONFIG_CMD_EXT2 61 #define CONFIG_CMD_FAT 62 #define CONFIG_CMD_IDE 63 #define CONFIG_CMD_PING 64 #define CONFIG_CMD_PING 65 #define CONFIG_CMD_SF 66 #define CONFIG_CMD_SPI 67 #define CONFIG_CMD_USB 68 #define CONFIG_CMD_FS_GENERIC 69 70 #define CONFIG_DOS_PARTITION 71 #define CONFIG_EFI_PARTITION 72 73 /* 74 * mv-common.h should be defined after CMD configs since it used them 75 * to enable certain macros 76 */ 77 #include "mv-common.h" 78 79 /* loading initramfs images without uimage header */ 80 #define CONFIG_SUPPORT_RAW_INITRD 81 82 /* ST M25P40 */ 83 #undef CONFIG_SPI_FLASH_MACRONIX 84 #define CONFIG_SPI_FLASH_STMICRO 85 #undef CONFIG_ENV_SPI_MAX_HZ 86 #define CONFIG_ENV_SPI_MAX_HZ 25000000 87 #undef CONFIG_SF_DEFAULT_SPEED 88 #define CONFIG_SF_DEFAULT_SPEED 25000000 89 90 91 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 92 93 /* 94 * Environment variables configurations 95 */ 96 #ifdef CONFIG_SPI_FLASH 97 #define CONFIG_SYS_MAX_FLASH_BANKS 1 98 #define CONFIG_SYS_MAX_FLASH_SECT 8 99 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 100 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ 101 #else 102 #define CONFIG_ENV_IS_NOWHERE 103 #endif 104 105 #define CONFIG_ENV_SIZE 0x10000 /* 64k */ 106 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ 107 108 /* 109 * Default environment variables 110 */ 111 #define CONFIG_LOADADDR 0x00800000 112 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" 113 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" 114 115 #if defined(CONFIG_LSXHL) 116 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" 117 #elif defined(CONFIG_LSCHLV2) 118 #define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" 119 #else 120 #error "Unsupported board" 121 #endif 122 123 #define CONFIG_EXTRA_ENV_SETTINGS \ 124 "bootsource=legacy\0" \ 125 "hdpart=0:1\0" \ 126 "kernel_addr=0x00800000\0" \ 127 "ramdisk_addr=0x01000000\0" \ 128 "fdt_addr=0x00ff0000\0" \ 129 "bootcmd_legacy=ide reset " \ 130 "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ 131 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ 132 "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ 133 "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ 134 "&& tftpboot ${ramdisk_addr} initrd.img " \ 135 "&& setenv ramdisk_len ${filesize} " \ 136 "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ 137 "&& bootz ${kernel_addr} " \ 138 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 139 "bootcmd_hdd=ide reset " \ 140 "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ 141 "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ 142 "&& setenv ramdisk_len ${filesize} " \ 143 "&& load ide ${hdpart} ${fdt_addr} /dtb " \ 144 "&& bootz ${kernel_addr} " \ 145 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 146 "bootcmd_usb=usb start " \ 147 "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ 148 "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ 149 "&& setenv ramdisk_len ${filesize} " \ 150 "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ 151 "&& bootz ${kernel_addr} " \ 152 "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ 153 "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ 154 "eraseenv=sf probe 0 " \ 155 "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ 156 " +" __stringify(CONFIG_ENV_SIZE) "\0" \ 157 "config_nc_dhcp=setenv autoload_old ${autoload}; " \ 158 "setenv autoload no " \ 159 "&& bootp " \ 160 "&& setenv ncip " \ 161 "&& setenv autoload ${autoload_old}; " \ 162 "setenv autoload_old\0" \ 163 "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ 164 "setenv ncip; setenv gatewayip; setenv ethact; " \ 165 "setenv bootfile; setenv dnsip; " \ 166 "setenv bootsource legacy; run ser\0" \ 167 "restore_env=run standard_env; saveenv; reset\0" \ 168 "ser=setenv stdin serial; setenv stdout serial; " \ 169 "setenv stderr serial\0" \ 170 "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ 171 "stdin=serial\0" \ 172 "stdout=serial\0" \ 173 "stderr=serial\0" 174 175 /* 176 * Ethernet Driver configuration 177 */ 178 #ifdef CONFIG_CMD_NET 179 #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ 180 #define CONFIG_PHY_BASE_ADR 7 181 #undef CONFIG_RESET_PHY_R 182 #endif /* CONFIG_CMD_NET */ 183 184 #ifdef CONFIG_CMD_IDE 185 #undef CONFIG_IDE_LED 186 #undef CONFIG_SYS_IDE_MAXBUS 187 #define CONFIG_SYS_IDE_MAXBUS 1 188 #undef CONFIG_SYS_IDE_MAXDEVICE 189 #define CONFIG_SYS_IDE_MAXDEVICE 1 190 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 191 #define CONFIG_SYS_64BIT_LBA 192 #endif 193 194 #endif /* _CONFIG_LSXL_H */ 195