xref: /openbmc/u-boot/include/configs/ls2080aqds.h (revision c2012cb4)
1 /*
2  * Copyright 2017 NXP
3  * Copyright 2015 Freescale Semiconductor
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __LS2_QDS_H
9 #define __LS2_QDS_H
10 
11 #include "ls2080a_common.h"
12 
13 #ifndef __ASSEMBLY__
14 unsigned long get_board_sys_clk(void);
15 unsigned long get_board_ddr_clk(void);
16 #endif
17 
18 #ifdef CONFIG_FSL_QSPI
19 #undef CONFIG_CMD_IMLS
20 #define CONFIG_QIXIS_I2C_ACCESS
21 #define CONFIG_SYS_I2C_EARLY_INIT
22 #define CONFIG_SYS_I2C_IFDR_DIV		0x7e
23 #endif
24 
25 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
26 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
27 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
28 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
29 
30 #define CONFIG_DDR_SPD
31 #define CONFIG_DDR_ECC
32 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
33 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
34 #define SPD_EEPROM_ADDRESS1	0x51
35 #define SPD_EEPROM_ADDRESS2	0x52
36 #define SPD_EEPROM_ADDRESS3	0x53
37 #define SPD_EEPROM_ADDRESS4	0x54
38 #define SPD_EEPROM_ADDRESS5	0x55
39 #define SPD_EEPROM_ADDRESS6	0x56	/* dummy address */
40 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
41 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
42 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
43 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
44 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
45 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
46 #endif
47 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
48 
49 /* SATA */
50 #define CONFIG_LIBATA
51 #define CONFIG_SCSI_AHCI
52 #define CONFIG_SCSI_AHCI_PLAT
53 
54 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
55 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
56 
57 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
58 #define CONFIG_SYS_SCSI_MAX_LUN			1
59 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
60 						CONFIG_SYS_SCSI_MAX_LUN)
61 
62 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
63 
64 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
65 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
66 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
67 
68 #define CONFIG_SYS_NOR0_CSPR					\
69 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
70 	CSPR_PORT_SIZE_16					| \
71 	CSPR_MSEL_NOR						| \
72 	CSPR_V)
73 #define CONFIG_SYS_NOR0_CSPR_EARLY				\
74 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
75 	CSPR_PORT_SIZE_16					| \
76 	CSPR_MSEL_NOR						| \
77 	CSPR_V)
78 #define CONFIG_SYS_NOR1_CSPR					\
79 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)		| \
80 	CSPR_PORT_SIZE_16					| \
81 	CSPR_MSEL_NOR						| \
82 	CSPR_V)
83 #define CONFIG_SYS_NOR1_CSPR_EARLY				\
84 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)	| \
85 	CSPR_PORT_SIZE_16					| \
86 	CSPR_MSEL_NOR						| \
87 	CSPR_V)
88 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
89 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
90 				FTIM0_NOR_TEADC(0x5) | \
91 				FTIM0_NOR_TEAHC(0x5))
92 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
93 				FTIM1_NOR_TRAD_NOR(0x1a) |\
94 				FTIM1_NOR_TSEQRAD_NOR(0x13))
95 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
96 				FTIM2_NOR_TCH(0x4) | \
97 				FTIM2_NOR_TWPH(0x0E) | \
98 				FTIM2_NOR_TWP(0x1c))
99 #define CONFIG_SYS_NOR_FTIM3	0x04000000
100 #define CONFIG_SYS_IFC_CCR	0x01000000
101 
102 #ifdef CONFIG_MTD_NOR_FLASH
103 #define CONFIG_FLASH_CFI_DRIVER
104 #define CONFIG_SYS_FLASH_CFI
105 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
106 #define CONFIG_SYS_FLASH_QUIET_TEST
107 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
108 
109 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
110 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
111 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
112 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
113 
114 #define CONFIG_SYS_FLASH_EMPTY_INFO
115 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
116 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
117 #endif
118 
119 #define CONFIG_NAND_FSL_IFC
120 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
121 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
122 
123 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
124 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
125 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
126 				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
127 				| CSPR_V)
128 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
129 
130 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
131 				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
132 				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
133 				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
134 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
135 				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
136 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
137 
138 #define CONFIG_SYS_NAND_ONFI_DETECTION
139 
140 /* ONFI NAND Flash mode0 Timing Params */
141 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
142 					FTIM0_NAND_TWP(0x18)   | \
143 					FTIM0_NAND_TWCHT(0x07) | \
144 					FTIM0_NAND_TWH(0x0a))
145 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
146 					FTIM1_NAND_TWBE(0x39)  | \
147 					FTIM1_NAND_TRR(0x0e)   | \
148 					FTIM1_NAND_TRP(0x18))
149 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
150 					FTIM2_NAND_TREH(0x0a) | \
151 					FTIM2_NAND_TWHRE(0x1e))
152 #define CONFIG_SYS_NAND_FTIM3		0x0
153 
154 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
155 #define CONFIG_SYS_MAX_NAND_DEVICE	1
156 #define CONFIG_MTD_NAND_VERIFY_WRITE
157 #define CONFIG_CMD_NAND
158 
159 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
160 
161 #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
162 #define QIXIS_LBMAP_SWITCH		0x06
163 #define QIXIS_LBMAP_MASK		0x0f
164 #define QIXIS_LBMAP_SHIFT		0
165 #define QIXIS_LBMAP_DFLTBANK		0x00
166 #define QIXIS_LBMAP_ALTBANK		0x04
167 #define QIXIS_LBMAP_NAND		0x09
168 #define QIXIS_LBMAP_SD			0x00
169 #define QIXIS_LBMAP_QSPI		0x0f
170 #define QIXIS_RST_CTL_RESET		0x31
171 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
172 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
173 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
174 #define QIXIS_RCW_SRC_NAND		0x107
175 #define QIXIS_RCW_SRC_SD		0x40
176 #define QIXIS_RCW_SRC_QSPI		0x62
177 #define	QIXIS_RST_FORCE_MEM		0x01
178 
179 #define CONFIG_SYS_CSPR3_EXT	(0x0)
180 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
181 				| CSPR_PORT_SIZE_8 \
182 				| CSPR_MSEL_GPCM \
183 				| CSPR_V)
184 #define CONFIG_SYS_CSPR3_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
185 				| CSPR_PORT_SIZE_8 \
186 				| CSPR_MSEL_GPCM \
187 				| CSPR_V)
188 
189 #define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
190 #define CONFIG_SYS_CSOR3	CSOR_GPCM_ADM_SHIFT(12)
191 /* QIXIS Timing parameters for IFC CS3 */
192 #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
193 					FTIM0_GPCM_TEADC(0x0e) | \
194 					FTIM0_GPCM_TEAHC(0x0e))
195 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
196 					FTIM1_GPCM_TRAD(0x3f))
197 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
198 					FTIM2_GPCM_TCH(0xf) | \
199 					FTIM2_GPCM_TWP(0x3E))
200 #define CONFIG_SYS_CS3_FTIM3		0x0
201 
202 #if defined(CONFIG_SPL)
203 #if defined(CONFIG_NAND_BOOT)
204 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
205 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR_EARLY
206 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR0_CSPR
207 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
208 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
209 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
210 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
211 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
212 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
213 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
214 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR_EARLY
215 #define CONFIG_SYS_CSPR2_FINAL		CONFIG_SYS_NOR1_CSPR
216 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK_EARLY
217 #define CONFIG_SYS_AMASK2_FINAL		CONFIG_SYS_NOR_AMASK
218 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
219 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
220 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
221 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
222 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
223 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
224 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
225 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
226 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
227 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
228 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
229 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
230 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
231 
232 #define CONFIG_ENV_OFFSET		(896 * 1024)
233 #define CONFIG_ENV_SECT_SIZE		0x20000
234 #define CONFIG_ENV_SIZE			0x2000
235 #define CONFIG_SPL_PAD_TO		0x20000
236 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
237 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
238 #elif defined(CONFIG_SD_BOOT)
239 #define CONFIG_ENV_OFFSET		0x200000
240 #define CONFIG_SYS_MMC_ENV_DEV		0
241 #define CONFIG_ENV_SIZE			0x20000
242 #endif
243 #else
244 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
245 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
246 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
247 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
248 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
249 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
250 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
251 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
252 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
253 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
254 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
255 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
256 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
257 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
258 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
259 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
260 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
261 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
262 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
263 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
264 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
265 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
266 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
267 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
268 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
269 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
270 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
271 
272 #ifndef CONFIG_QSPI_BOOT
273 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
274 #define CONFIG_ENV_SECT_SIZE		0x20000
275 #define CONFIG_ENV_SIZE			0x2000
276 #endif
277 #endif
278 
279 /* Debug Server firmware */
280 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
281 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
282 
283 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
284 
285 /*
286  * I2C
287  */
288 #define I2C_MUX_PCA_ADDR		0x77
289 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
290 
291 /* I2C bus multiplexer */
292 #define I2C_MUX_CH_DEFAULT      0x8
293 
294 /* SPI */
295 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
296 #define CONFIG_SPI_FLASH
297 
298 #ifdef CONFIG_FSL_DSPI
299 #define CONFIG_SPI_FLASH_STMICRO
300 #define CONFIG_SPI_FLASH_SST
301 #define CONFIG_SPI_FLASH_EON
302 #endif
303 
304 #ifdef CONFIG_FSL_QSPI
305 #define CONFIG_SPI_FLASH_SPANSION
306 #define FSL_QSPI_FLASH_SIZE		(1 << 26) /* 64MB */
307 #define FSL_QSPI_FLASH_NUM		4
308 #endif
309 /*
310  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
311  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
312  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
313  */
314 #define FSL_QIXIS_BRDCFG9_QSPI		0x1
315 
316 #endif
317 
318 /*
319  * MMC
320  */
321 #ifdef CONFIG_MMC
322 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
323 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
324 #endif
325 
326 /*
327  * RTC configuration
328  */
329 #define RTC
330 #define CONFIG_RTC_DS3231               1
331 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
332 
333 /* EEPROM */
334 #define CONFIG_ID_EEPROM
335 #define CONFIG_SYS_I2C_EEPROM_NXID
336 #define CONFIG_SYS_EEPROM_BUS_NUM	0
337 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
338 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
339 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
340 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
341 
342 #define CONFIG_FSL_MEMAC
343 
344 #ifdef CONFIG_PCI
345 #define CONFIG_PCI_SCAN_SHOW
346 #define CONFIG_CMD_PCI
347 #endif
348 
349 /*  MMC  */
350 #ifdef CONFIG_MMC
351 #define CONFIG_FSL_ESDHC
352 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
353 #endif
354 
355 /* Initial environment variables */
356 #undef CONFIG_EXTRA_ENV_SETTINGS
357 #ifdef CONFIG_SECURE_BOOT
358 #define CONFIG_EXTRA_ENV_SETTINGS		\
359 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
360 	"loadaddr=0x80100000\0"			\
361 	"kernel_addr=0x100000\0"		\
362 	"ramdisk_addr=0x800000\0"		\
363 	"ramdisk_size=0x2000000\0"		\
364 	"fdt_high=0xa0000000\0"			\
365 	"initrd_high=0xffffffffffffffff\0"	\
366 	"kernel_start=0x581000000\0"		\
367 	"kernel_load=0xa0000000\0"		\
368 	"kernel_size=0x2800000\0"		\
369 	"mcmemsize=0x40000000\0"		\
370 	"mcinitcmd=esbc_validate 0x580700000;"  \
371 	"esbc_validate 0x580740000;"            \
372 	"fsl_mc start mc 0x580a00000"           \
373 	" 0x580e00000 \0"
374 #elif defined(CONFIG_SD_BOOT)
375 #define CONFIG_EXTRA_ENV_SETTINGS		\
376 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
377 	"loadaddr=0x90100000\0"                 \
378 	"kernel_addr=0x800\0"                \
379 	"ramdisk_addr=0x800000\0"               \
380 	"ramdisk_size=0x2000000\0"              \
381 	"fdt_high=0xa0000000\0"                 \
382 	"initrd_high=0xffffffffffffffff\0"      \
383 	"kernel_start=0x8000\0"              \
384 	"kernel_load=0xa0000000\0"              \
385 	"kernel_size=0x14000\0"               \
386 	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
387 	"mmc read 0x80100000 0x7000 0x800;" \
388 	"fsl_mc start mc 0x80000000 0x80100000\0"       \
389 	"mcmemsize=0x70000000 \0"
390 #else
391 #define CONFIG_EXTRA_ENV_SETTINGS		\
392 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
393 	"loadaddr=0x80100000\0"			\
394 	"kernel_addr=0x100000\0"		\
395 	"ramdisk_addr=0x800000\0"		\
396 	"ramdisk_size=0x2000000\0"		\
397 	"fdt_high=0xa0000000\0"			\
398 	"initrd_high=0xffffffffffffffff\0"	\
399 	"kernel_start=0x581000000\0"		\
400 	"kernel_load=0xa0000000\0"		\
401 	"kernel_size=0x2800000\0"		\
402 	"mcmemsize=0x40000000\0"		\
403 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
404 	" 0x580e00000 \0"
405 #endif /* CONFIG_SECURE_BOOT */
406 
407 
408 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
409 #define CONFIG_FSL_MEMAC
410 #define	CONFIG_PHYLIB
411 #define CONFIG_PHYLIB_10G
412 #define CONFIG_PHY_VITESSE
413 #define CONFIG_PHY_REALTEK
414 #define CONFIG_PHY_TERANETICS
415 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
416 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
417 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
418 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
419 
420 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
421 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
422 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
423 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
424 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
425 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
426 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
427 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
428 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
429 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
430 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
431 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
432 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
433 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
434 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
435 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
436 
437 #define CONFIG_MII		/* MII PHY management */
438 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
439 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
440 
441 #endif
442 
443 /*
444  * USB
445  */
446 #define CONFIG_HAS_FSL_XHCI_USB
447 #define CONFIG_USB_XHCI_FSL
448 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
449 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
450 
451 #include <asm/fsl_secure_boot.h>
452 
453 #endif /* __LS2_QDS_H */
454