xref: /openbmc/u-boot/include/configs/ls2080aqds.h (revision 9b3f40ad)
1 /*
2  * Copyright 2017 NXP
3  * Copyright 2015 Freescale Semiconductor
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __LS2_QDS_H
9 #define __LS2_QDS_H
10 
11 #include "ls2080a_common.h"
12 
13 #ifndef __ASSEMBLY__
14 unsigned long get_board_sys_clk(void);
15 unsigned long get_board_ddr_clk(void);
16 #endif
17 
18 #ifdef CONFIG_FSL_QSPI
19 #define CONFIG_QIXIS_I2C_ACCESS
20 #define CONFIG_SYS_I2C_EARLY_INIT
21 #define CONFIG_SYS_I2C_IFDR_DIV		0x7e
22 #endif
23 
24 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
25 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
26 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
27 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
28 
29 #define CONFIG_DDR_SPD
30 #define CONFIG_DDR_ECC
31 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
32 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
33 #define SPD_EEPROM_ADDRESS1	0x51
34 #define SPD_EEPROM_ADDRESS2	0x52
35 #define SPD_EEPROM_ADDRESS3	0x53
36 #define SPD_EEPROM_ADDRESS4	0x54
37 #define SPD_EEPROM_ADDRESS5	0x55
38 #define SPD_EEPROM_ADDRESS6	0x56	/* dummy address */
39 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
40 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
41 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
42 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
43 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
44 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
45 #endif
46 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
47 
48 /* SATA */
49 #define CONFIG_LIBATA
50 #define CONFIG_SCSI_AHCI
51 #define CONFIG_SCSI_AHCI_PLAT
52 
53 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
54 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
55 
56 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
57 #define CONFIG_SYS_SCSI_MAX_LUN			1
58 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
59 						CONFIG_SYS_SCSI_MAX_LUN)
60 
61 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
62 
63 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
64 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
65 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
66 
67 #define CONFIG_SYS_NOR0_CSPR					\
68 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
69 	CSPR_PORT_SIZE_16					| \
70 	CSPR_MSEL_NOR						| \
71 	CSPR_V)
72 #define CONFIG_SYS_NOR0_CSPR_EARLY				\
73 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
74 	CSPR_PORT_SIZE_16					| \
75 	CSPR_MSEL_NOR						| \
76 	CSPR_V)
77 #define CONFIG_SYS_NOR1_CSPR					\
78 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)		| \
79 	CSPR_PORT_SIZE_16					| \
80 	CSPR_MSEL_NOR						| \
81 	CSPR_V)
82 #define CONFIG_SYS_NOR1_CSPR_EARLY				\
83 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)	| \
84 	CSPR_PORT_SIZE_16					| \
85 	CSPR_MSEL_NOR						| \
86 	CSPR_V)
87 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
88 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
89 				FTIM0_NOR_TEADC(0x5) | \
90 				FTIM0_NOR_TEAHC(0x5))
91 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
92 				FTIM1_NOR_TRAD_NOR(0x1a) |\
93 				FTIM1_NOR_TSEQRAD_NOR(0x13))
94 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
95 				FTIM2_NOR_TCH(0x4) | \
96 				FTIM2_NOR_TWPH(0x0E) | \
97 				FTIM2_NOR_TWP(0x1c))
98 #define CONFIG_SYS_NOR_FTIM3	0x04000000
99 #define CONFIG_SYS_IFC_CCR	0x01000000
100 
101 #ifdef CONFIG_MTD_NOR_FLASH
102 #define CONFIG_FLASH_CFI_DRIVER
103 #define CONFIG_SYS_FLASH_CFI
104 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
105 #define CONFIG_SYS_FLASH_QUIET_TEST
106 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
107 
108 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
109 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
110 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
111 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
112 
113 #define CONFIG_SYS_FLASH_EMPTY_INFO
114 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
115 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
116 #endif
117 
118 #define CONFIG_NAND_FSL_IFC
119 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
120 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
121 
122 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
123 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
124 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
125 				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
126 				| CSPR_V)
127 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
128 
129 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
130 				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
131 				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
132 				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
133 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
134 				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
135 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
136 
137 #define CONFIG_SYS_NAND_ONFI_DETECTION
138 
139 /* ONFI NAND Flash mode0 Timing Params */
140 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
141 					FTIM0_NAND_TWP(0x18)   | \
142 					FTIM0_NAND_TWCHT(0x07) | \
143 					FTIM0_NAND_TWH(0x0a))
144 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
145 					FTIM1_NAND_TWBE(0x39)  | \
146 					FTIM1_NAND_TRR(0x0e)   | \
147 					FTIM1_NAND_TRP(0x18))
148 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
149 					FTIM2_NAND_TREH(0x0a) | \
150 					FTIM2_NAND_TWHRE(0x1e))
151 #define CONFIG_SYS_NAND_FTIM3		0x0
152 
153 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
154 #define CONFIG_SYS_MAX_NAND_DEVICE	1
155 #define CONFIG_MTD_NAND_VERIFY_WRITE
156 
157 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
158 
159 #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
160 #define QIXIS_LBMAP_SWITCH		0x06
161 #define QIXIS_LBMAP_MASK		0x0f
162 #define QIXIS_LBMAP_SHIFT		0
163 #define QIXIS_LBMAP_DFLTBANK		0x00
164 #define QIXIS_LBMAP_ALTBANK		0x04
165 #define QIXIS_LBMAP_NAND		0x09
166 #define QIXIS_LBMAP_SD			0x00
167 #define QIXIS_LBMAP_QSPI		0x0f
168 #define QIXIS_RST_CTL_RESET		0x31
169 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
170 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
171 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
172 #define QIXIS_RCW_SRC_NAND		0x107
173 #define QIXIS_RCW_SRC_SD		0x40
174 #define QIXIS_RCW_SRC_QSPI		0x62
175 #define	QIXIS_RST_FORCE_MEM		0x01
176 
177 #define CONFIG_SYS_CSPR3_EXT	(0x0)
178 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
179 				| CSPR_PORT_SIZE_8 \
180 				| CSPR_MSEL_GPCM \
181 				| CSPR_V)
182 #define CONFIG_SYS_CSPR3_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
183 				| CSPR_PORT_SIZE_8 \
184 				| CSPR_MSEL_GPCM \
185 				| CSPR_V)
186 
187 #define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
188 #define CONFIG_SYS_CSOR3	CSOR_GPCM_ADM_SHIFT(12)
189 /* QIXIS Timing parameters for IFC CS3 */
190 #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
191 					FTIM0_GPCM_TEADC(0x0e) | \
192 					FTIM0_GPCM_TEAHC(0x0e))
193 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
194 					FTIM1_GPCM_TRAD(0x3f))
195 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
196 					FTIM2_GPCM_TCH(0xf) | \
197 					FTIM2_GPCM_TWP(0x3E))
198 #define CONFIG_SYS_CS3_FTIM3		0x0
199 
200 #if defined(CONFIG_SPL)
201 #if defined(CONFIG_NAND_BOOT)
202 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
203 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR_EARLY
204 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR0_CSPR
205 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
206 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
207 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
208 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
209 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
210 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
211 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
212 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR_EARLY
213 #define CONFIG_SYS_CSPR2_FINAL		CONFIG_SYS_NOR1_CSPR
214 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK_EARLY
215 #define CONFIG_SYS_AMASK2_FINAL		CONFIG_SYS_NOR_AMASK
216 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
217 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
218 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
219 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
220 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
221 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
222 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
223 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
224 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
225 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
226 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
227 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
228 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
229 
230 #define CONFIG_ENV_OFFSET		(896 * 1024)
231 #define CONFIG_ENV_SECT_SIZE		0x20000
232 #define CONFIG_ENV_SIZE			0x2000
233 #define CONFIG_SPL_PAD_TO		0x20000
234 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
235 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
236 #elif defined(CONFIG_SD_BOOT)
237 #define CONFIG_ENV_OFFSET		0x300000
238 #define CONFIG_SYS_MMC_ENV_DEV		0
239 #define CONFIG_ENV_SIZE			0x20000
240 #endif
241 #else
242 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
243 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
244 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
245 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
246 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
247 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
248 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
249 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
250 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
251 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
252 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
253 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
254 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
255 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
256 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
257 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
258 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
259 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
260 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
261 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
262 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
263 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
264 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
265 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
266 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
267 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
268 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
269 
270 #ifndef CONFIG_QSPI_BOOT
271 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
272 #define CONFIG_ENV_SECT_SIZE		0x20000
273 #define CONFIG_ENV_SIZE			0x2000
274 #endif
275 #endif
276 
277 /* Debug Server firmware */
278 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
279 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
280 
281 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
282 
283 /*
284  * I2C
285  */
286 #define I2C_MUX_PCA_ADDR		0x77
287 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
288 
289 /* I2C bus multiplexer */
290 #define I2C_MUX_CH_DEFAULT      0x8
291 
292 /* SPI */
293 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
294 #define CONFIG_SPI_FLASH
295 
296 #ifdef CONFIG_FSL_DSPI
297 #define CONFIG_SPI_FLASH_STMICRO
298 #define CONFIG_SPI_FLASH_SST
299 #define CONFIG_SPI_FLASH_EON
300 #endif
301 
302 #ifdef CONFIG_FSL_QSPI
303 #define CONFIG_SPI_FLASH_SPANSION
304 #define FSL_QSPI_FLASH_SIZE		(1 << 26) /* 64MB */
305 #define FSL_QSPI_FLASH_NUM		4
306 #endif
307 /*
308  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
309  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
310  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
311  */
312 #define FSL_QIXIS_BRDCFG9_QSPI		0x1
313 
314 #endif
315 
316 /*
317  * MMC
318  */
319 #ifdef CONFIG_MMC
320 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
321 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
322 #endif
323 
324 /*
325  * RTC configuration
326  */
327 #define RTC
328 #define CONFIG_RTC_DS3231               1
329 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
330 
331 /* EEPROM */
332 #define CONFIG_ID_EEPROM
333 #define CONFIG_SYS_I2C_EEPROM_NXID
334 #define CONFIG_SYS_EEPROM_BUS_NUM	0
335 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
336 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
337 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
338 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
339 
340 #define CONFIG_FSL_MEMAC
341 
342 #ifdef CONFIG_PCI
343 #define CONFIG_PCI_SCAN_SHOW
344 #endif
345 
346 /*  MMC  */
347 #ifdef CONFIG_MMC
348 #define CONFIG_FSL_ESDHC
349 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
350 #endif
351 
352 /* Initial environment variables */
353 #undef CONFIG_EXTRA_ENV_SETTINGS
354 #ifdef CONFIG_SECURE_BOOT
355 #define CONFIG_EXTRA_ENV_SETTINGS		\
356 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
357 	"loadaddr=0x80100000\0"			\
358 	"kernel_addr=0x100000\0"		\
359 	"ramdisk_addr=0x800000\0"		\
360 	"ramdisk_size=0x2000000\0"		\
361 	"fdt_high=0xa0000000\0"			\
362 	"initrd_high=0xffffffffffffffff\0"	\
363 	"kernel_start=0x581000000\0"		\
364 	"kernel_load=0xa0000000\0"		\
365 	"kernel_size=0x2800000\0"		\
366 	"mcmemsize=0x40000000\0"		\
367 	"mcinitcmd=esbc_validate 0x580700000;"  \
368 	"esbc_validate 0x580740000;"            \
369 	"fsl_mc start mc 0x580a00000"           \
370 	" 0x580e00000 \0"
371 #elif defined(CONFIG_SD_BOOT)
372 #define CONFIG_EXTRA_ENV_SETTINGS		\
373 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
374 	"loadaddr=0x90100000\0"                 \
375 	"kernel_addr=0x800\0"                \
376 	"ramdisk_addr=0x800000\0"               \
377 	"ramdisk_size=0x2000000\0"              \
378 	"fdt_high=0xa0000000\0"                 \
379 	"initrd_high=0xffffffffffffffff\0"      \
380 	"kernel_start=0x8000\0"              \
381 	"kernel_load=0xa0000000\0"              \
382 	"kernel_size=0x14000\0"               \
383 	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
384 	"mmc read 0x80100000 0x7000 0x800;" \
385 	"fsl_mc start mc 0x80000000 0x80100000\0"       \
386 	"mcmemsize=0x70000000 \0"
387 #else
388 #define CONFIG_EXTRA_ENV_SETTINGS		\
389 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
390 	"loadaddr=0x80100000\0"			\
391 	"kernel_addr=0x100000\0"		\
392 	"ramdisk_addr=0x800000\0"		\
393 	"ramdisk_size=0x2000000\0"		\
394 	"fdt_high=0xa0000000\0"			\
395 	"initrd_high=0xffffffffffffffff\0"	\
396 	"kernel_start=0x581000000\0"		\
397 	"kernel_load=0xa0000000\0"		\
398 	"kernel_size=0x2800000\0"		\
399 	"mcmemsize=0x40000000\0"		\
400 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
401 	" 0x580e00000 \0"
402 #endif /* CONFIG_SECURE_BOOT */
403 
404 
405 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
406 #define CONFIG_FSL_MEMAC
407 #define CONFIG_PHYLIB_10G
408 #define CONFIG_PHY_VITESSE
409 #define CONFIG_PHY_REALTEK
410 #define CONFIG_PHY_TERANETICS
411 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
412 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
413 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
414 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
415 
416 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
417 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
418 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
419 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
420 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
421 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
422 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
423 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
424 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
425 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
426 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
427 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
428 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
429 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
430 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
431 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
432 
433 #define CONFIG_MII		/* MII PHY management */
434 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
435 
436 #endif
437 
438 #include <asm/fsl_secure_boot.h>
439 
440 #endif /* __LS2_QDS_H */
441