xref: /openbmc/u-boot/include/configs/ls2080aqds.h (revision 8b7d0924)
1 /*
2  * Copyright 2017 NXP
3  * Copyright 2015 Freescale Semiconductor
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __LS2_QDS_H
9 #define __LS2_QDS_H
10 
11 #include "ls2080a_common.h"
12 
13 #ifndef __ASSEMBLY__
14 unsigned long get_board_sys_clk(void);
15 unsigned long get_board_ddr_clk(void);
16 #endif
17 
18 #ifdef CONFIG_FSL_QSPI
19 #undef CONFIG_CMD_IMLS
20 #define CONFIG_QIXIS_I2C_ACCESS
21 #define CONFIG_SYS_I2C_EARLY_INIT
22 #define CONFIG_SYS_I2C_IFDR_DIV		0x7e
23 #endif
24 
25 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
26 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
27 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
28 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
29 
30 #define CONFIG_DDR_SPD
31 #define CONFIG_DDR_ECC
32 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
33 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
34 #define SPD_EEPROM_ADDRESS1	0x51
35 #define SPD_EEPROM_ADDRESS2	0x52
36 #define SPD_EEPROM_ADDRESS3	0x53
37 #define SPD_EEPROM_ADDRESS4	0x54
38 #define SPD_EEPROM_ADDRESS5	0x55
39 #define SPD_EEPROM_ADDRESS6	0x56	/* dummy address */
40 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
41 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
42 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
43 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
44 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
45 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
46 #endif
47 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
48 
49 /* SATA */
50 #define CONFIG_LIBATA
51 #define CONFIG_SCSI_AHCI
52 #define CONFIG_SCSI_AHCI_PLAT
53 #define CONFIG_SCSI
54 
55 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
56 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
57 
58 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
59 #define CONFIG_SYS_SCSI_MAX_LUN			1
60 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
61 						CONFIG_SYS_SCSI_MAX_LUN)
62 
63 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
64 
65 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
66 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
67 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
68 
69 #define CONFIG_SYS_NOR0_CSPR					\
70 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
71 	CSPR_PORT_SIZE_16					| \
72 	CSPR_MSEL_NOR						| \
73 	CSPR_V)
74 #define CONFIG_SYS_NOR0_CSPR_EARLY				\
75 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
76 	CSPR_PORT_SIZE_16					| \
77 	CSPR_MSEL_NOR						| \
78 	CSPR_V)
79 #define CONFIG_SYS_NOR1_CSPR					\
80 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)		| \
81 	CSPR_PORT_SIZE_16					| \
82 	CSPR_MSEL_NOR						| \
83 	CSPR_V)
84 #define CONFIG_SYS_NOR1_CSPR_EARLY				\
85 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)	| \
86 	CSPR_PORT_SIZE_16					| \
87 	CSPR_MSEL_NOR						| \
88 	CSPR_V)
89 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
90 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
91 				FTIM0_NOR_TEADC(0x5) | \
92 				FTIM0_NOR_TEAHC(0x5))
93 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
94 				FTIM1_NOR_TRAD_NOR(0x1a) |\
95 				FTIM1_NOR_TSEQRAD_NOR(0x13))
96 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
97 				FTIM2_NOR_TCH(0x4) | \
98 				FTIM2_NOR_TWPH(0x0E) | \
99 				FTIM2_NOR_TWP(0x1c))
100 #define CONFIG_SYS_NOR_FTIM3	0x04000000
101 #define CONFIG_SYS_IFC_CCR	0x01000000
102 
103 #ifdef CONFIG_MTD_NOR_FLASH
104 #define CONFIG_FLASH_CFI_DRIVER
105 #define CONFIG_SYS_FLASH_CFI
106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
107 #define CONFIG_SYS_FLASH_QUIET_TEST
108 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
109 
110 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
111 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
112 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
113 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
114 
115 #define CONFIG_SYS_FLASH_EMPTY_INFO
116 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
117 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
118 #endif
119 
120 #define CONFIG_NAND_FSL_IFC
121 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
122 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
123 
124 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
125 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
126 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
127 				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
128 				| CSPR_V)
129 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
130 
131 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
132 				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
133 				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
134 				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
135 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
136 				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
137 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
138 
139 #define CONFIG_SYS_NAND_ONFI_DETECTION
140 
141 /* ONFI NAND Flash mode0 Timing Params */
142 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
143 					FTIM0_NAND_TWP(0x18)   | \
144 					FTIM0_NAND_TWCHT(0x07) | \
145 					FTIM0_NAND_TWH(0x0a))
146 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
147 					FTIM1_NAND_TWBE(0x39)  | \
148 					FTIM1_NAND_TRR(0x0e)   | \
149 					FTIM1_NAND_TRP(0x18))
150 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
151 					FTIM2_NAND_TREH(0x0a) | \
152 					FTIM2_NAND_TWHRE(0x1e))
153 #define CONFIG_SYS_NAND_FTIM3		0x0
154 
155 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
156 #define CONFIG_SYS_MAX_NAND_DEVICE	1
157 #define CONFIG_MTD_NAND_VERIFY_WRITE
158 #define CONFIG_CMD_NAND
159 
160 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
161 
162 #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
163 #define QIXIS_LBMAP_SWITCH		0x06
164 #define QIXIS_LBMAP_MASK		0x0f
165 #define QIXIS_LBMAP_SHIFT		0
166 #define QIXIS_LBMAP_DFLTBANK		0x00
167 #define QIXIS_LBMAP_ALTBANK		0x04
168 #define QIXIS_LBMAP_NAND		0x09
169 #define QIXIS_LBMAP_SD			0x00
170 #define QIXIS_LBMAP_QSPI		0x0f
171 #define QIXIS_RST_CTL_RESET		0x31
172 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
173 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
174 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
175 #define QIXIS_RCW_SRC_NAND		0x107
176 #define QIXIS_RCW_SRC_SD		0x40
177 #define QIXIS_RCW_SRC_QSPI		0x62
178 #define	QIXIS_RST_FORCE_MEM		0x01
179 
180 #define CONFIG_SYS_CSPR3_EXT	(0x0)
181 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
182 				| CSPR_PORT_SIZE_8 \
183 				| CSPR_MSEL_GPCM \
184 				| CSPR_V)
185 #define CONFIG_SYS_CSPR3_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
186 				| CSPR_PORT_SIZE_8 \
187 				| CSPR_MSEL_GPCM \
188 				| CSPR_V)
189 
190 #define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
191 #define CONFIG_SYS_CSOR3	CSOR_GPCM_ADM_SHIFT(12)
192 /* QIXIS Timing parameters for IFC CS3 */
193 #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
194 					FTIM0_GPCM_TEADC(0x0e) | \
195 					FTIM0_GPCM_TEAHC(0x0e))
196 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
197 					FTIM1_GPCM_TRAD(0x3f))
198 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
199 					FTIM2_GPCM_TCH(0xf) | \
200 					FTIM2_GPCM_TWP(0x3E))
201 #define CONFIG_SYS_CS3_FTIM3		0x0
202 
203 #if defined(CONFIG_SPL)
204 #if defined(CONFIG_NAND_BOOT)
205 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
206 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR_EARLY
207 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR0_CSPR
208 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
209 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
210 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
211 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
212 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
213 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
214 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
215 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR_EARLY
216 #define CONFIG_SYS_CSPR2_FINAL		CONFIG_SYS_NOR1_CSPR
217 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK_EARLY
218 #define CONFIG_SYS_AMASK2_FINAL		CONFIG_SYS_NOR_AMASK
219 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
220 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
221 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
222 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
223 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
224 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
225 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
226 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
227 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
228 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
229 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
230 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
231 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
232 
233 #define CONFIG_ENV_IS_IN_NAND
234 #define CONFIG_ENV_OFFSET		(896 * 1024)
235 #define CONFIG_ENV_SECT_SIZE		0x20000
236 #define CONFIG_ENV_SIZE			0x2000
237 #define CONFIG_SPL_PAD_TO		0x20000
238 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
239 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
240 #elif defined(CONFIG_SD_BOOT)
241 #define CONFIG_ENV_OFFSET		0x200000
242 #define CONFIG_ENV_IS_IN_MMC
243 #define CONFIG_SYS_MMC_ENV_DEV		0
244 #define CONFIG_ENV_SIZE			0x20000
245 #endif
246 #else
247 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
248 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
249 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
250 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
251 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
252 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
253 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
254 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
255 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
256 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
257 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
258 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
259 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
260 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
261 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
262 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
263 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
264 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
265 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
266 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
267 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
268 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
269 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
270 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
271 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
272 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
273 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
274 
275 #ifndef CONFIG_QSPI_BOOT
276 #define CONFIG_ENV_IS_IN_FLASH
277 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
278 #define CONFIG_ENV_SECT_SIZE		0x20000
279 #define CONFIG_ENV_SIZE			0x2000
280 #endif
281 #endif
282 
283 /* Debug Server firmware */
284 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
285 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
286 
287 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
288 
289 /*
290  * I2C
291  */
292 #define I2C_MUX_PCA_ADDR		0x77
293 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
294 
295 /* I2C bus multiplexer */
296 #define I2C_MUX_CH_DEFAULT      0x8
297 
298 /* SPI */
299 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
300 #define CONFIG_SPI_FLASH
301 
302 #ifdef CONFIG_FSL_DSPI
303 #define CONFIG_SPI_FLASH_STMICRO
304 #define CONFIG_SPI_FLASH_SST
305 #define CONFIG_SPI_FLASH_EON
306 #endif
307 
308 #ifdef CONFIG_FSL_QSPI
309 #define CONFIG_SPI_FLASH_SPANSION
310 #define FSL_QSPI_FLASH_SIZE		(1 << 26) /* 64MB */
311 #define FSL_QSPI_FLASH_NUM		4
312 #endif
313 /*
314  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
315  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
316  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
317  */
318 #define FSL_QIXIS_BRDCFG9_QSPI		0x1
319 
320 #endif
321 
322 /*
323  * MMC
324  */
325 #ifdef CONFIG_MMC
326 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
327 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
328 #endif
329 
330 /*
331  * RTC configuration
332  */
333 #define RTC
334 #define CONFIG_RTC_DS3231               1
335 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
336 
337 /* EEPROM */
338 #define CONFIG_ID_EEPROM
339 #define CONFIG_SYS_I2C_EEPROM_NXID
340 #define CONFIG_SYS_EEPROM_BUS_NUM	0
341 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
342 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
343 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
344 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
345 
346 #define CONFIG_FSL_MEMAC
347 
348 #ifdef CONFIG_PCI
349 #define CONFIG_PCI_SCAN_SHOW
350 #define CONFIG_CMD_PCI
351 #endif
352 
353 /*  MMC  */
354 #ifdef CONFIG_MMC
355 #define CONFIG_FSL_ESDHC
356 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
357 #endif
358 
359 /* Initial environment variables */
360 #undef CONFIG_EXTRA_ENV_SETTINGS
361 #ifdef CONFIG_SECURE_BOOT
362 #define CONFIG_EXTRA_ENV_SETTINGS		\
363 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
364 	"loadaddr=0x80100000\0"			\
365 	"kernel_addr=0x100000\0"		\
366 	"ramdisk_addr=0x800000\0"		\
367 	"ramdisk_size=0x2000000\0"		\
368 	"fdt_high=0xa0000000\0"			\
369 	"initrd_high=0xffffffffffffffff\0"	\
370 	"kernel_start=0x581000000\0"		\
371 	"kernel_load=0xa0000000\0"		\
372 	"kernel_size=0x2800000\0"		\
373 	"mcmemsize=0x40000000\0"		\
374 	"mcinitcmd=esbc_validate 0x580700000;"  \
375 	"esbc_validate 0x580740000;"            \
376 	"fsl_mc start mc 0x580a00000"           \
377 	" 0x580e00000 \0"
378 #elif defined(CONFIG_SD_BOOT)
379 #define CONFIG_EXTRA_ENV_SETTINGS		\
380 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
381 	"loadaddr=0x90100000\0"                 \
382 	"kernel_addr=0x800\0"                \
383 	"ramdisk_addr=0x800000\0"               \
384 	"ramdisk_size=0x2000000\0"              \
385 	"fdt_high=0xa0000000\0"                 \
386 	"initrd_high=0xffffffffffffffff\0"      \
387 	"kernel_start=0x8000\0"              \
388 	"kernel_load=0xa0000000\0"              \
389 	"kernel_size=0x14000\0"               \
390 	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
391 	"mmc read 0x80100000 0x7000 0x800;" \
392 	"fsl_mc start mc 0x80000000 0x80100000\0"       \
393 	"mcmemsize=0x70000000 \0"
394 #else
395 #define CONFIG_EXTRA_ENV_SETTINGS		\
396 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
397 	"loadaddr=0x80100000\0"			\
398 	"kernel_addr=0x100000\0"		\
399 	"ramdisk_addr=0x800000\0"		\
400 	"ramdisk_size=0x2000000\0"		\
401 	"fdt_high=0xa0000000\0"			\
402 	"initrd_high=0xffffffffffffffff\0"	\
403 	"kernel_start=0x581000000\0"		\
404 	"kernel_load=0xa0000000\0"		\
405 	"kernel_size=0x2800000\0"		\
406 	"mcmemsize=0x40000000\0"		\
407 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
408 	" 0x580e00000 \0"
409 #endif /* CONFIG_SECURE_BOOT */
410 
411 
412 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
413 #define CONFIG_FSL_MEMAC
414 #define	CONFIG_PHYLIB
415 #define CONFIG_PHYLIB_10G
416 #define CONFIG_PHY_VITESSE
417 #define CONFIG_PHY_REALTEK
418 #define CONFIG_PHY_TERANETICS
419 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
420 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
421 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
422 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
423 
424 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
425 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
426 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
427 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
428 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
429 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
430 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
431 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
432 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
433 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
434 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
435 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
436 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
437 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
438 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
439 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
440 
441 #define CONFIG_MII		/* MII PHY management */
442 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
443 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
444 
445 #endif
446 
447 /*
448  * USB
449  */
450 #define CONFIG_HAS_FSL_XHCI_USB
451 #define CONFIG_USB_XHCI_FSL
452 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
453 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
454 
455 #include <asm/fsl_secure_boot.h>
456 
457 #endif /* __LS2_QDS_H */
458