xref: /openbmc/u-boot/include/configs/ls2080aqds.h (revision 04b24965)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017 NXP
4  * Copyright 2015 Freescale Semiconductor
5  */
6 
7 #ifndef __LS2_QDS_H
8 #define __LS2_QDS_H
9 
10 #include "ls2080a_common.h"
11 
12 #ifndef __ASSEMBLY__
13 unsigned long get_board_sys_clk(void);
14 unsigned long get_board_ddr_clk(void);
15 #endif
16 
17 #ifdef CONFIG_FSL_QSPI
18 #define CONFIG_QIXIS_I2C_ACCESS
19 #define CONFIG_SYS_I2C_EARLY_INIT
20 #define CONFIG_SYS_I2C_IFDR_DIV		0x7e
21 #endif
22 
23 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
24 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
25 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
26 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
27 
28 #define CONFIG_DDR_SPD
29 #define CONFIG_DDR_ECC
30 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
31 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
32 #define SPD_EEPROM_ADDRESS1	0x51
33 #define SPD_EEPROM_ADDRESS2	0x52
34 #define SPD_EEPROM_ADDRESS3	0x53
35 #define SPD_EEPROM_ADDRESS4	0x54
36 #define SPD_EEPROM_ADDRESS5	0x55
37 #define SPD_EEPROM_ADDRESS6	0x56	/* dummy address */
38 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
39 #define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
40 #define CONFIG_DIMM_SLOTS_PER_CTLR		2
41 #define CONFIG_CHIP_SELECTS_PER_CTRL		4
42 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
43 #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
44 #endif
45 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
46 
47 /* SATA */
48 #define CONFIG_SCSI_AHCI_PLAT
49 
50 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
51 #define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
52 
53 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
54 #define CONFIG_SYS_SCSI_MAX_LUN			1
55 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
56 						CONFIG_SYS_SCSI_MAX_LUN)
57 
58 #ifdef CONFIG_TFABOOT
59 #define CONFIG_SYS_MMC_ENV_DEV		0
60 #define CONFIG_ENV_SIZE			0x20000
61 #define CONFIG_ENV_OFFSET		0x500000
62 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
63 					 CONFIG_ENV_OFFSET)
64 #define CONFIG_ENV_SECT_SIZE		0x20000
65 #endif
66 
67 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
68 
69 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
70 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
71 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
72 
73 #define CONFIG_SYS_NOR0_CSPR					\
74 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
75 	CSPR_PORT_SIZE_16					| \
76 	CSPR_MSEL_NOR						| \
77 	CSPR_V)
78 #define CONFIG_SYS_NOR0_CSPR_EARLY				\
79 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
80 	CSPR_PORT_SIZE_16					| \
81 	CSPR_MSEL_NOR						| \
82 	CSPR_V)
83 #define CONFIG_SYS_NOR1_CSPR					\
84 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)		| \
85 	CSPR_PORT_SIZE_16					| \
86 	CSPR_MSEL_NOR						| \
87 	CSPR_V)
88 #define CONFIG_SYS_NOR1_CSPR_EARLY				\
89 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)	| \
90 	CSPR_PORT_SIZE_16					| \
91 	CSPR_MSEL_NOR						| \
92 	CSPR_V)
93 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
94 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
95 				FTIM0_NOR_TEADC(0x5) | \
96 				FTIM0_NOR_TEAHC(0x5))
97 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
98 				FTIM1_NOR_TRAD_NOR(0x1a) |\
99 				FTIM1_NOR_TSEQRAD_NOR(0x13))
100 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
101 				FTIM2_NOR_TCH(0x4) | \
102 				FTIM2_NOR_TWPH(0x0E) | \
103 				FTIM2_NOR_TWP(0x1c))
104 #define CONFIG_SYS_NOR_FTIM3	0x04000000
105 #define CONFIG_SYS_IFC_CCR	0x01000000
106 
107 #ifdef CONFIG_MTD_NOR_FLASH
108 #define CONFIG_SYS_FLASH_QUIET_TEST
109 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
110 
111 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
112 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
113 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
114 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
115 
116 #define CONFIG_SYS_FLASH_EMPTY_INFO
117 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
118 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
119 #endif
120 
121 #define CONFIG_NAND_FSL_IFC
122 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
123 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
124 
125 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
126 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
127 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
128 				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
129 				| CSPR_V)
130 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
131 
132 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
133 				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
134 				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
135 				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
136 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
137 				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
138 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
139 
140 #define CONFIG_SYS_NAND_ONFI_DETECTION
141 
142 /* ONFI NAND Flash mode0 Timing Params */
143 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
144 					FTIM0_NAND_TWP(0x18)   | \
145 					FTIM0_NAND_TWCHT(0x07) | \
146 					FTIM0_NAND_TWH(0x0a))
147 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
148 					FTIM1_NAND_TWBE(0x39)  | \
149 					FTIM1_NAND_TRR(0x0e)   | \
150 					FTIM1_NAND_TRP(0x18))
151 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
152 					FTIM2_NAND_TREH(0x0a) | \
153 					FTIM2_NAND_TWHRE(0x1e))
154 #define CONFIG_SYS_NAND_FTIM3		0x0
155 
156 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
157 #define CONFIG_SYS_MAX_NAND_DEVICE	1
158 #define CONFIG_MTD_NAND_VERIFY_WRITE
159 
160 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
161 
162 #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
163 #define QIXIS_LBMAP_SWITCH		0x06
164 #define QIXIS_LBMAP_MASK		0x0f
165 #define QIXIS_LBMAP_SHIFT		0
166 #define QIXIS_LBMAP_DFLTBANK		0x00
167 #define QIXIS_LBMAP_ALTBANK		0x04
168 #define QIXIS_LBMAP_NAND		0x09
169 #define QIXIS_LBMAP_SD			0x00
170 #define QIXIS_LBMAP_QSPI		0x0f
171 #define QIXIS_RST_CTL_RESET		0x31
172 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
173 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
174 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
175 #define QIXIS_RCW_SRC_NAND		0x107
176 #define QIXIS_RCW_SRC_SD		0x40
177 #define QIXIS_RCW_SRC_QSPI		0x62
178 #define	QIXIS_RST_FORCE_MEM		0x01
179 
180 #define CONFIG_SYS_CSPR3_EXT	(0x0)
181 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
182 				| CSPR_PORT_SIZE_8 \
183 				| CSPR_MSEL_GPCM \
184 				| CSPR_V)
185 #define CONFIG_SYS_CSPR3_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
186 				| CSPR_PORT_SIZE_8 \
187 				| CSPR_MSEL_GPCM \
188 				| CSPR_V)
189 
190 #define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
191 #define CONFIG_SYS_CSOR3	CSOR_GPCM_ADM_SHIFT(12)
192 /* QIXIS Timing parameters for IFC CS3 */
193 #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
194 					FTIM0_GPCM_TEADC(0x0e) | \
195 					FTIM0_GPCM_TEAHC(0x0e))
196 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
197 					FTIM1_GPCM_TRAD(0x3f))
198 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
199 					FTIM2_GPCM_TCH(0xf) | \
200 					FTIM2_GPCM_TWP(0x3E))
201 #define CONFIG_SYS_CS3_FTIM3		0x0
202 
203 #if defined(CONFIG_SPL)
204 #if defined(CONFIG_NAND_BOOT)
205 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
206 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR_EARLY
207 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR0_CSPR
208 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
209 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
210 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
211 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
212 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
213 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
214 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
215 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR_EARLY
216 #define CONFIG_SYS_CSPR2_FINAL		CONFIG_SYS_NOR1_CSPR
217 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK_EARLY
218 #define CONFIG_SYS_AMASK2_FINAL		CONFIG_SYS_NOR_AMASK
219 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
220 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
221 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
222 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
223 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
224 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
225 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
226 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
227 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
228 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
229 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
230 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
231 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
232 
233 #define CONFIG_ENV_OFFSET		(896 * 1024)
234 #define CONFIG_ENV_SECT_SIZE		0x20000
235 #define CONFIG_ENV_SIZE			0x2000
236 #define CONFIG_SPL_PAD_TO		0x20000
237 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
238 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
239 #elif defined(CONFIG_SD_BOOT)
240 #define CONFIG_ENV_OFFSET		0x300000
241 #define CONFIG_SYS_MMC_ENV_DEV		0
242 #define CONFIG_ENV_SIZE			0x20000
243 #endif
244 #else
245 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
246 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
247 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
248 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
249 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
250 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
251 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
252 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
253 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
254 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
255 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
256 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
257 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
258 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
259 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
260 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
261 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
262 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
263 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
264 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
265 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
266 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
267 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
268 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
269 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
270 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
271 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
272 
273 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_TFABOOT)
274 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
275 #define CONFIG_ENV_SECT_SIZE		0x20000
276 #define CONFIG_ENV_SIZE			0x2000
277 #endif
278 #endif
279 
280 /* Debug Server firmware */
281 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
282 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
283 
284 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
285 
286 /*
287  * I2C
288  */
289 #define I2C_MUX_PCA_ADDR		0x77
290 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/
291 
292 /* I2C bus multiplexer */
293 #define I2C_MUX_CH_DEFAULT      0x8
294 
295 /* SPI */
296 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
297 #define CONFIG_SPI_FLASH
298 
299 #ifdef CONFIG_FSL_DSPI
300 #define CONFIG_SPI_FLASH_STMICRO
301 #define CONFIG_SPI_FLASH_SST
302 #define CONFIG_SPI_FLASH_EON
303 #endif
304 
305 #ifdef CONFIG_FSL_QSPI
306 #define CONFIG_SPI_FLASH_SPANSION
307 #define FSL_QSPI_FLASH_SIZE		(1 << 26) /* 64MB */
308 #define FSL_QSPI_FLASH_NUM		4
309 #endif
310 /*
311  * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure.
312  * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0
313  * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1
314  */
315 #define FSL_QIXIS_BRDCFG9_QSPI		0x1
316 
317 #endif
318 
319 /*
320  * MMC
321  */
322 #ifdef CONFIG_MMC
323 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
324 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
325 #endif
326 
327 /*
328  * RTC configuration
329  */
330 #define RTC
331 #define CONFIG_RTC_DS3231               1
332 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
333 
334 /* EEPROM */
335 #define CONFIG_ID_EEPROM
336 #define CONFIG_SYS_I2C_EEPROM_NXID
337 #define CONFIG_SYS_EEPROM_BUS_NUM	0
338 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
339 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
340 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
341 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
342 
343 #define CONFIG_FSL_MEMAC
344 
345 #ifdef CONFIG_PCI
346 #define CONFIG_PCI_SCAN_SHOW
347 #endif
348 
349 /*  MMC  */
350 #ifdef CONFIG_MMC
351 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
352 #endif
353 
354 /* Initial environment variables */
355 #undef CONFIG_EXTRA_ENV_SETTINGS
356 #ifdef CONFIG_SECURE_BOOT
357 #define CONFIG_EXTRA_ENV_SETTINGS		\
358 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
359 	"loadaddr=0x80100000\0"			\
360 	"kernel_addr=0x100000\0"		\
361 	"ramdisk_addr=0x800000\0"		\
362 	"ramdisk_size=0x2000000\0"		\
363 	"fdt_high=0xa0000000\0"			\
364 	"initrd_high=0xffffffffffffffff\0"	\
365 	"kernel_start=0x581000000\0"		\
366 	"kernel_load=0xa0000000\0"		\
367 	"kernel_size=0x2800000\0"		\
368 	"mcmemsize=0x40000000\0"		\
369 	"mcinitcmd=esbc_validate 0x580700000;"  \
370 	"esbc_validate 0x580740000;"            \
371 	"fsl_mc start mc 0x580a00000"           \
372 	" 0x580e00000 \0"
373 #else
374 #ifdef CONFIG_TFABOOT
375 #define SD_MC_INIT_CMD				\
376 	"mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
377 	"mmc read 0x80100000 0x7000 0x800;" \
378 	"fsl_mc start mc 0x80000000 0x80100000\0"
379 #define IFC_MC_INIT_CMD				\
380 	"fsl_mc start mc 0x580a00000" \
381 	" 0x580e00000 \0"
382 #define CONFIG_EXTRA_ENV_SETTINGS		\
383 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
384 	"loadaddr=0x80100000\0"                 \
385 	"loadaddr_sd=0x90100000\0"                 \
386 	"kernel_addr=0x100000\0"                \
387 	"kernel_addr_sd=0x800\0"                \
388 	"ramdisk_addr=0x800000\0"               \
389 	"ramdisk_size=0x2000000\0"              \
390 	"fdt_high=0xa0000000\0"                 \
391 	"initrd_high=0xffffffffffffffff\0"      \
392 	"kernel_start=0x581000000\0"            \
393 	"kernel_start_sd=0x8000\0"              \
394 	"kernel_load=0xa0000000\0"              \
395 	"kernel_size=0x2800000\0"               \
396 	"kernel_size_sd=0x14000\0"               \
397 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
398 	" 0x580e00000 \0"			\
399 	"mcmemsize=0x70000000 \0"
400 #elif defined(CONFIG_SD_BOOT)
401 #define CONFIG_EXTRA_ENV_SETTINGS		\
402 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
403 	"loadaddr=0x90100000\0"                 \
404 	"kernel_addr=0x800\0"                \
405 	"ramdisk_addr=0x800000\0"               \
406 	"ramdisk_size=0x2000000\0"              \
407 	"fdt_high=0xa0000000\0"                 \
408 	"initrd_high=0xffffffffffffffff\0"      \
409 	"kernel_start=0x8000\0"              \
410 	"kernel_load=0xa0000000\0"              \
411 	"kernel_size=0x14000\0"               \
412 	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
413 	"mmc read 0x80100000 0x7000 0x800;" \
414 	"fsl_mc start mc 0x80000000 0x80100000\0"       \
415 	"mcmemsize=0x70000000 \0"
416 #else
417 #define CONFIG_EXTRA_ENV_SETTINGS		\
418 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
419 	"loadaddr=0x80100000\0"			\
420 	"kernel_addr=0x100000\0"		\
421 	"ramdisk_addr=0x800000\0"		\
422 	"ramdisk_size=0x2000000\0"		\
423 	"fdt_high=0xa0000000\0"			\
424 	"initrd_high=0xffffffffffffffff\0"	\
425 	"kernel_start=0x581000000\0"		\
426 	"kernel_load=0xa0000000\0"		\
427 	"kernel_size=0x2800000\0"		\
428 	"mcmemsize=0x40000000\0"		\
429 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
430 	" 0x580e00000 \0"
431 #endif /* CONFIG_TFABOOT */
432 #endif /* CONFIG_SECURE_BOOT */
433 
434 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
435 #define CONFIG_FSL_MEMAC
436 #define CONFIG_PHYLIB_10G
437 #define CONFIG_PHY_VITESSE
438 #define CONFIG_PHY_REALTEK
439 #define CONFIG_PHY_TERANETICS
440 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
441 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
442 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
443 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
444 
445 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
446 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
447 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
448 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
449 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
450 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
451 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
452 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
453 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
454 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
455 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
456 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
457 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
458 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
459 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
460 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
461 
462 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
463 
464 #endif
465 
466 #include <asm/fsl_secure_boot.h>
467 
468 #endif /* __LS2_QDS_H */
469