1 /* 2 * Copyright 2017 NXP 3 * Copyright (C) 2014 Freescale Semiconductor 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __LS2_COMMON_H 9 #define __LS2_COMMON_H 10 11 #define CONFIG_REMAKE_ELF 12 #define CONFIG_FSL_LAYERSCAPE 13 #define CONFIG_MP 14 #define CONFIG_GICV3 15 #define CONFIG_FSL_TZPC_BP147 16 17 #include <asm/arch/stream_id_lsch3.h> 18 #include <asm/arch/config.h> 19 20 /* Link Definitions */ 21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 22 23 /* We need architecture specific misc initializations */ 24 25 /* Link Definitions */ 26 #ifndef CONFIG_QSPI_BOOT 27 #ifdef CONFIG_SPL 28 #define CONFIG_SYS_TEXT_BASE 0x80400000 29 #else 30 #define CONFIG_SYS_TEXT_BASE 0x30100000 31 #endif 32 #else 33 #define CONFIG_SYS_TEXT_BASE 0x20100000 34 #define CONFIG_ENV_IS_IN_SPI_FLASH 35 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 36 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ 37 #define CONFIG_ENV_SECT_SIZE 0x10000 38 #endif 39 40 #define CONFIG_SUPPORT_RAW_INITRD 41 42 #define CONFIG_SKIP_LOWLEVEL_INIT 43 44 #ifndef CONFIG_SPL 45 #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ 46 #endif 47 #ifndef CONFIG_SYS_FSL_DDR4 48 #define CONFIG_SYS_DDR_RAW_TIMING 49 #endif 50 51 #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ 52 53 #define CONFIG_VERY_BIG_RAM 54 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 55 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 56 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 57 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL 58 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 59 60 /* 61 * SMP Definitinos 62 */ 63 #define CPU_RELEASE_ADDR secondary_boot_func 64 65 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS 66 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR 67 #define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL 68 /* 69 * DDR controller use 0 as the base address for binding. 70 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. 71 */ 72 #define CONFIG_SYS_DP_DDR_BASE_PHY 0 73 #define CONFIG_DP_DDR_CTRL 2 74 #define CONFIG_DP_DDR_NUM_CTRLS 1 75 #endif 76 77 /* Generic Timer Definitions */ 78 /* 79 * This is not an accurate number. It is used in start.S. The frequency 80 * will be udpated later when get_bus_freq(0) is available. 81 */ 82 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 83 84 /* Size of malloc() pool */ 85 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) 86 87 /* I2C */ 88 #define CONFIG_SYS_I2C 89 #define CONFIG_SYS_I2C_MXC 90 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 91 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 92 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 93 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 94 95 /* Serial Port */ 96 #define CONFIG_CONS_INDEX 1 97 #define CONFIG_SYS_NS16550_SERIAL 98 #define CONFIG_SYS_NS16550_REG_SIZE 1 99 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) 100 101 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 102 103 /* IFC */ 104 #define CONFIG_FSL_IFC 105 106 /* 107 * During booting, IFC is mapped at the region of 0x30000000. 108 * But this region is limited to 256MB. To accommodate NOR, promjet 109 * and FPGA. This region is divided as below: 110 * 0x30000000 - 0x37ffffff : 128MB : NOR flash 111 * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet 112 * 0x3C000000 - 0x40000000 : 64MB : FPGA etc 113 * 114 * To accommodate bigger NOR flash and other devices, we will map IFC 115 * chip selects to as below: 116 * 0x5_1000_0000..0x5_1fff_ffff Memory Hole 117 * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) 118 * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB 119 * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) 120 * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) 121 * 122 * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. 123 * CONFIG_SYS_FLASH_BASE has the final address (core view) 124 * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) 125 * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address 126 * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting 127 */ 128 129 #define CONFIG_SYS_FLASH_BASE 0x580000000ULL 130 #define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 131 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 132 133 #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 134 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 135 136 #ifndef __ASSEMBLY__ 137 unsigned long long get_qixis_addr(void); 138 #endif 139 #define QIXIS_BASE get_qixis_addr() 140 #define QIXIS_BASE_PHYS 0x20000000 141 #define QIXIS_BASE_PHYS_EARLY 0xC000000 142 #define QIXIS_STAT_PRES1 0xb 143 #define QIXIS_SDID_MASK 0x07 144 #define QIXIS_ESDHC_NO_ADAPTER 0x7 145 146 #define CONFIG_SYS_NAND_BASE 0x530000000ULL 147 #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 148 149 /* MC firmware */ 150 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ 151 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 152 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 153 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 154 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 155 /* For LS2085A */ 156 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 157 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 158 159 /* 160 * Carve out a DDR region which will not be used by u-boot/Linux 161 * 162 * It will be used by MC and Debug Server. The MC region must be 163 * 512MB aligned, so the min size to hide is 512MB. 164 */ 165 #ifdef CONFIG_FSL_MC_ENET 166 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) 167 #endif 168 169 /* Command line configuration */ 170 171 /* Miscellaneous configurable options */ 172 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 173 174 /* Physical Memory Map */ 175 /* fixme: these need to be checked against the board */ 176 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 177 178 #define CONFIG_NR_DRAM_BANKS 3 179 180 #define CONFIG_HWCONFIG 181 #define HWCONFIG_BUFFER_SIZE 128 182 183 /* Allow to overwrite serial and ethaddr */ 184 #define CONFIG_ENV_OVERWRITE 185 186 /* Initial environment variables */ 187 #define CONFIG_EXTRA_ENV_SETTINGS \ 188 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 189 "loadaddr=0x80100000\0" \ 190 "kernel_addr=0x100000\0" \ 191 "ramdisk_addr=0x800000\0" \ 192 "ramdisk_size=0x2000000\0" \ 193 "fdt_high=0xa0000000\0" \ 194 "initrd_high=0xffffffffffffffff\0" \ 195 "kernel_start=0x581000000\0" \ 196 "kernel_load=0xa0000000\0" \ 197 "kernel_size=0x2800000\0" \ 198 "console=ttyAMA0,38400n8\0" \ 199 "mcinitcmd=fsl_mc start mc 0x580a00000" \ 200 " 0x580e00000 \0" 201 202 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 203 "earlycon=uart8250,mmio,0x21c0500 " \ 204 "ramdisk_size=0x2000000 default_hugepagesz=2m" \ 205 " hugepagesz=2m hugepages=256" 206 #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ 207 " cp.b $kernel_start $kernel_load" \ 208 " $kernel_size && bootm $kernel_load" 209 210 /* Monitor Command Prompt */ 211 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 212 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 213 sizeof(CONFIG_SYS_PROMPT) + 16) 214 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 215 #define CONFIG_SYS_LONGHELP 216 #define CONFIG_CMDLINE_EDITING 1 217 #define CONFIG_AUTO_COMPLETE 218 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 219 220 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 221 222 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 223 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 224 #define CONFIG_SPL_FRAMEWORK 225 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 226 #define CONFIG_SPL_MAX_SIZE 0x16000 227 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) 228 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 229 #define CONFIG_SPL_TEXT_BASE 0x1800a000 230 231 #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 232 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST 233 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 234 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 235 #define CONFIG_SYS_MONITOR_LEN (640 * 1024) 236 237 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 238 239 #endif /* __LS2_COMMON_H */ 240