1 /* 2 * Copyright (C) 2014 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS2_COMMON_H 8 #define __LS2_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_MP 13 #define CONFIG_GICV3 14 #define CONFIG_FSL_TZPC_BP147 15 16 #include <asm/arch/ls2080a_stream_id.h> 17 #include <asm/arch/config.h> 18 19 /* Link Definitions */ 20 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 21 22 /* We need architecture specific misc initializations */ 23 24 /* Link Definitions */ 25 #ifndef CONFIG_QSPI_BOOT 26 #ifdef CONFIG_SPL 27 #define CONFIG_SYS_TEXT_BASE 0x80400000 28 #else 29 #define CONFIG_SYS_TEXT_BASE 0x30100000 30 #endif 31 #endif 32 33 #define CONFIG_SUPPORT_RAW_INITRD 34 35 #define CONFIG_SKIP_LOWLEVEL_INIT 36 37 #ifndef CONFIG_SPL 38 #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ 39 #endif 40 #ifndef CONFIG_SYS_FSL_DDR4 41 #define CONFIG_SYS_DDR_RAW_TIMING 42 #endif 43 44 #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ 45 46 #define CONFIG_VERY_BIG_RAM 47 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 48 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 49 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 50 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL 51 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 52 53 /* 54 * SMP Definitinos 55 */ 56 #define CPU_RELEASE_ADDR secondary_boot_func 57 58 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS 59 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR 60 #define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL 61 /* 62 * DDR controller use 0 as the base address for binding. 63 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. 64 */ 65 #define CONFIG_SYS_DP_DDR_BASE_PHY 0 66 #define CONFIG_DP_DDR_CTRL 2 67 #define CONFIG_DP_DDR_NUM_CTRLS 1 68 #endif 69 70 /* Generic Timer Definitions */ 71 /* 72 * This is not an accurate number. It is used in start.S. The frequency 73 * will be udpated later when get_bus_freq(0) is available. 74 */ 75 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 76 77 /* Size of malloc() pool */ 78 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) 79 80 /* I2C */ 81 #define CONFIG_SYS_I2C 82 #define CONFIG_SYS_I2C_MXC 83 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 84 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 85 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 86 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 87 88 /* Serial Port */ 89 #define CONFIG_CONS_INDEX 1 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_REG_SIZE 1 92 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) 93 94 #define CONFIG_BAUDRATE 115200 95 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 96 97 /* IFC */ 98 #define CONFIG_FSL_IFC 99 100 /* 101 * During booting, IFC is mapped at the region of 0x30000000. 102 * But this region is limited to 256MB. To accommodate NOR, promjet 103 * and FPGA. This region is divided as below: 104 * 0x30000000 - 0x37ffffff : 128MB : NOR flash 105 * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet 106 * 0x3C000000 - 0x40000000 : 64MB : FPGA etc 107 * 108 * To accommodate bigger NOR flash and other devices, we will map IFC 109 * chip selects to as below: 110 * 0x5_1000_0000..0x5_1fff_ffff Memory Hole 111 * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) 112 * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB 113 * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) 114 * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) 115 * 116 * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. 117 * CONFIG_SYS_FLASH_BASE has the final address (core view) 118 * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) 119 * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address 120 * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting 121 */ 122 123 #define CONFIG_SYS_FLASH_BASE 0x580000000ULL 124 #define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 125 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 126 127 #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 128 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 129 130 #ifndef __ASSEMBLY__ 131 unsigned long long get_qixis_addr(void); 132 #endif 133 #define QIXIS_BASE get_qixis_addr() 134 #define QIXIS_BASE_PHYS 0x20000000 135 #define QIXIS_BASE_PHYS_EARLY 0xC000000 136 #define QIXIS_STAT_PRES1 0xb 137 #define QIXIS_SDID_MASK 0x07 138 #define QIXIS_ESDHC_NO_ADAPTER 0x7 139 140 #define CONFIG_SYS_NAND_BASE 0x530000000ULL 141 #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 142 143 /* MC firmware */ 144 #define CONFIG_FSL_MC_ENET 145 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ 146 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 147 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 148 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 149 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 150 /* For LS2085A */ 151 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 152 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 153 154 /* 155 * Carve out a DDR region which will not be used by u-boot/Linux 156 * 157 * It will be used by MC and Debug Server. The MC region must be 158 * 512MB aligned, so the min size to hide is 512MB. 159 */ 160 #ifdef CONFIG_FSL_MC_ENET 161 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) 162 #define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024) 163 #endif 164 165 /* Command line configuration */ 166 #define CONFIG_CMD_ENV 167 168 /* Miscellaneous configurable options */ 169 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 170 171 /* Physical Memory Map */ 172 /* fixme: these need to be checked against the board */ 173 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 174 175 #define CONFIG_NR_DRAM_BANKS 3 176 177 #define CONFIG_HWCONFIG 178 #define HWCONFIG_BUFFER_SIZE 128 179 180 /* Allow to overwrite serial and ethaddr */ 181 #define CONFIG_ENV_OVERWRITE 182 183 /* Initial environment variables */ 184 #define CONFIG_EXTRA_ENV_SETTINGS \ 185 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 186 "loadaddr=0x80100000\0" \ 187 "kernel_addr=0x100000\0" \ 188 "ramdisk_addr=0x800000\0" \ 189 "ramdisk_size=0x2000000\0" \ 190 "fdt_high=0xa0000000\0" \ 191 "initrd_high=0xffffffffffffffff\0" \ 192 "kernel_start=0x581200000\0" \ 193 "kernel_load=0xa0000000\0" \ 194 "kernel_size=0x2800000\0" \ 195 "console=ttyAMA0,38400n8\0" \ 196 "mcinitcmd=fsl_mc start mc 0x580300000" \ 197 " 0x580800000 \0" 198 199 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 200 "earlycon=uart8250,mmio,0x21c0500 " \ 201 "ramdisk_size=0x2000000 default_hugepagesz=2m" \ 202 " hugepagesz=2m hugepages=256" 203 #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ 204 " cp.b $kernel_start $kernel_load" \ 205 " $kernel_size && bootm $kernel_load" 206 207 /* Monitor Command Prompt */ 208 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 209 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 210 sizeof(CONFIG_SYS_PROMPT) + 16) 211 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 212 #define CONFIG_SYS_LONGHELP 213 #define CONFIG_CMDLINE_EDITING 1 214 #define CONFIG_AUTO_COMPLETE 215 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 216 217 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 218 219 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 220 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 221 #define CONFIG_SPL_FRAMEWORK 222 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 223 #define CONFIG_SPL_MAX_SIZE 0x16000 224 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) 225 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 226 #define CONFIG_SPL_TEXT_BASE 0x1800a000 227 228 #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 229 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST 230 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 231 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 232 #define CONFIG_SYS_MONITOR_LEN (640 * 1024) 233 234 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 235 236 /* Hash command with SHA acceleration supported in hardware */ 237 #ifdef CONFIG_FSL_CAAM 238 #define CONFIG_CMD_HASH 239 #define CONFIG_SHA_HW_ACCEL 240 #endif 241 242 #endif /* __LS2_COMMON_H */ 243