1 /* 2 * Copyright 2017 NXP 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1088A_QDS_H 8 #define __LS1088A_QDS_H 9 10 #include "ls1088a_common.h" 11 12 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 16 #ifndef __ASSEMBLY__ 17 unsigned long get_board_sys_clk(void); 18 unsigned long get_board_ddr_clk(void); 19 #endif 20 21 22 #if defined(CONFIG_QSPI_BOOT) 23 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 24 #define CONFIG_ENV_SECT_SIZE 0x40000 25 #elif defined(CONFIG_SD_BOOT) 26 #define CONFIG_ENV_OFFSET (3 * 1024 * 1024) 27 #define CONFIG_SYS_MMC_ENV_DEV 0 28 #define CONFIG_ENV_SIZE 0x2000 29 #else 30 #define CONFIG_ENV_IS_IN_FLASH 31 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) 32 #define CONFIG_ENV_SECT_SIZE 0x20000 33 #define CONFIG_ENV_SIZE 0x20000 34 #endif 35 36 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 37 #define CONFIG_QIXIS_I2C_ACCESS 38 #define SYS_NO_FLASH 39 40 #undef CONFIG_CMD_IMLS 41 #define CONFIG_SYS_CLK_FREQ 100000000 42 #define CONFIG_DDR_CLK_FREQ 100000000 43 #else 44 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 45 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 46 #endif 47 48 #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) 49 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 50 51 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 52 53 #define CONFIG_DDR_SPD 54 #define CONFIG_DDR_ECC 55 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 56 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 57 #define SPD_EEPROM_ADDRESS 0x51 58 #define CONFIG_SYS_SPD_BUS_NUM 0 59 60 61 /* 62 * IFC Definitions 63 */ 64 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 65 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 66 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 67 #define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) 68 69 #define CONFIG_SYS_NOR0_CSPR \ 70 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 71 CSPR_PORT_SIZE_16 | \ 72 CSPR_MSEL_NOR | \ 73 CSPR_V) 74 #define CONFIG_SYS_NOR0_CSPR_EARLY \ 75 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ 76 CSPR_PORT_SIZE_16 | \ 77 CSPR_MSEL_NOR | \ 78 CSPR_V) 79 #define CONFIG_SYS_NOR1_CSPR \ 80 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ 81 CSPR_PORT_SIZE_16 | \ 82 CSPR_MSEL_NOR | \ 83 CSPR_V) 84 #define CONFIG_SYS_NOR1_CSPR_EARLY \ 85 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ 86 CSPR_PORT_SIZE_16 | \ 87 CSPR_MSEL_NOR | \ 88 CSPR_V) 89 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) 90 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 91 FTIM0_NOR_TEADC(0x5) | \ 92 FTIM0_NOR_TEAHC(0x5)) 93 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 94 FTIM1_NOR_TRAD_NOR(0x1a) |\ 95 FTIM1_NOR_TSEQRAD_NOR(0x13)) 96 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 97 FTIM2_NOR_TCH(0x4) | \ 98 FTIM2_NOR_TWPH(0x0E) | \ 99 FTIM2_NOR_TWP(0x1c)) 100 #define CONFIG_SYS_NOR_FTIM3 0x04000000 101 #define CONFIG_SYS_IFC_CCR 0x01000000 102 103 #ifndef SYS_NO_FLASH 104 #define CONFIG_FLASH_CFI_DRIVER 105 #define CONFIG_SYS_FLASH_CFI 106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 107 #define CONFIG_SYS_FLASH_QUIET_TEST 108 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 109 110 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 111 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 112 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 113 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 114 115 #define CONFIG_SYS_FLASH_EMPTY_INFO 116 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ 117 CONFIG_SYS_FLASH_BASE + 0x40000000} 118 #endif 119 #endif 120 121 #define CONFIG_NAND_FSL_IFC 122 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 123 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 124 125 #define CONFIG_SYS_NAND_CSPR_EXT (0x0) 126 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 127 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 128 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 129 | CSPR_V) 130 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) 131 132 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 133 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 134 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 135 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 136 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 137 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 138 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 139 140 #define CONFIG_SYS_NAND_ONFI_DETECTION 141 142 /* ONFI NAND Flash mode0 Timing Params */ 143 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 144 FTIM0_NAND_TWP(0x18) | \ 145 FTIM0_NAND_TWCHT(0x07) | \ 146 FTIM0_NAND_TWH(0x0a)) 147 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 148 FTIM1_NAND_TWBE(0x39) | \ 149 FTIM1_NAND_TRR(0x0e) | \ 150 FTIM1_NAND_TRP(0x18)) 151 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 152 FTIM2_NAND_TREH(0x0a) | \ 153 FTIM2_NAND_TWHRE(0x1e)) 154 #define CONFIG_SYS_NAND_FTIM3 0x0 155 156 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 157 #define CONFIG_SYS_MAX_NAND_DEVICE 1 158 #define CONFIG_MTD_NAND_VERIFY_WRITE 159 #define CONFIG_CMD_NAND 160 161 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 162 163 #define CONFIG_FSL_QIXIS 164 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 165 #define QIXIS_LBMAP_SWITCH 6 166 #define QIXIS_QMAP_MASK 0xe0 167 #define QIXIS_QMAP_SHIFT 5 168 #define QIXIS_LBMAP_MASK 0x0f 169 #define QIXIS_LBMAP_SHIFT 0 170 #define QIXIS_LBMAP_DFLTBANK 0x0e 171 #define QIXIS_LBMAP_ALTBANK 0x2e 172 #define QIXIS_LBMAP_SD 0x00 173 #define QIXIS_LBMAP_EMMC 0x00 174 #define QIXIS_LBMAP_IFC 0x00 175 #define QIXIS_LBMAP_SD_QSPI 0x0e 176 #define QIXIS_LBMAP_QSPI 0x0e 177 #define QIXIS_RCW_SRC_IFC 0x25 178 #define QIXIS_RCW_SRC_SD 0x40 179 #define QIXIS_RCW_SRC_EMMC 0x41 180 #define QIXIS_RCW_SRC_QSPI 0x62 181 #define QIXIS_RST_CTL_RESET 0x41 182 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 183 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 184 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 185 #define QIXIS_RST_FORCE_MEM 0x01 186 #define QIXIS_STAT_PRES1 0xb 187 #define QIXIS_SDID_MASK 0x07 188 #define QIXIS_ESDHC_NO_ADAPTER 0x7 189 190 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 191 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ 192 | CSPR_PORT_SIZE_8 \ 193 | CSPR_MSEL_GPCM \ 194 | CSPR_V) 195 #define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 196 | CSPR_PORT_SIZE_8 \ 197 | CSPR_MSEL_GPCM \ 198 | CSPR_V) 199 200 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024) 201 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 202 #define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) 203 #else 204 #define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12) 205 #endif 206 /* QIXIS Timing parameters*/ 207 #define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 208 FTIM0_GPCM_TEADC(0x0e) | \ 209 FTIM0_GPCM_TEAHC(0x0e)) 210 #define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 211 FTIM1_GPCM_TRAD(0x3f)) 212 #define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 213 FTIM2_GPCM_TCH(0xf) | \ 214 FTIM2_GPCM_TWP(0x3E)) 215 #define SYS_FPGA_CS_FTIM3 0x0 216 217 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 218 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 219 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 220 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 221 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 222 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 223 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 224 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 225 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 226 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT 227 #define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR 228 #define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL 229 #define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK 230 #define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR 231 #define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 232 #define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 233 #define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 234 #define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 235 #else 236 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 237 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY 238 #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR 239 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 240 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 241 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 242 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 243 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 244 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 245 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 246 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY 247 #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR 248 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY 249 #define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK 250 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 251 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 252 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 253 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 254 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 255 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 256 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 257 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 258 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 259 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 260 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 261 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 262 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 263 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT 264 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR 265 #define CONFIG_SYS_CSPR3_FINAL CONFIG_SYS_FPGA_CSPR_FINAL 266 #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK 267 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR 268 #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_CS_FTIM0 269 #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_CS_FTIM1 270 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_CS_FTIM2 271 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_CS_FTIM3 272 #endif 273 274 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 275 276 /* 277 * I2C bus multiplexer 278 */ 279 #define I2C_MUX_PCA_ADDR_PRI 0x77 280 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 281 #define I2C_RETIMER_ADDR 0x18 282 #define I2C_RETIMER_ADDR2 0x19 283 #define I2C_MUX_CH_DEFAULT 0x8 284 #define I2C_MUX_CH5 0xD 285 286 #define I2C_MUX_CH_VOL_MONITOR 0xA 287 288 /* Voltage monitor on channel 2*/ 289 #define I2C_VOL_MONITOR_ADDR 0x63 290 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 291 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 292 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 293 #define I2C_SVDD_MONITOR_ADDR 0x4F 294 295 #define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" 296 #define CONFIG_VID 297 298 /* The lowest and highest voltage allowed for LS1088AQDS */ 299 #define VDD_MV_MIN 819 300 #define VDD_MV_MAX 1212 301 302 #define CONFIG_VOL_MONITOR_LTC3882_SET 303 #define CONFIG_VOL_MONITOR_LTC3882_READ 304 305 /* PM Bus commands code for LTC3882*/ 306 #define PMBUS_CMD_PAGE 0x0 307 #define PMBUS_CMD_READ_VOUT 0x8B 308 #define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 309 #define PMBUS_CMD_VOUT_COMMAND 0x21 310 311 #define PWM_CHANNEL0 0x0 312 313 /* 314 * RTC configuration 315 */ 316 #define RTC 317 #define CONFIG_RTC_PCF8563 1 318 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ 319 #define CONFIG_CMD_DATE 320 321 /* EEPROM */ 322 #define CONFIG_ID_EEPROM 323 #define CONFIG_SYS_I2C_EEPROM_NXID 324 #define CONFIG_SYS_EEPROM_BUS_NUM 0 325 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 326 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 327 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 328 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 329 330 /* QSPI device */ 331 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 332 #define CONFIG_FSL_QSPI 333 #define FSL_QSPI_FLASH_SIZE (1 << 26) 334 #define FSL_QSPI_FLASH_NUM 2 335 336 #endif 337 338 #ifdef CONFIG_FSL_DSPI 339 #define CONFIG_SPI_FLASH_STMICRO 340 #define CONFIG_SPI_FLASH_SST 341 #define CONFIG_SPI_FLASH_EON 342 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 343 #define CONFIG_SF_DEFAULT_BUS 1 344 #define CONFIG_SF_DEFAULT_CS 0 345 #endif 346 #endif 347 348 #define CONFIG_CMD_MEMINFO 349 #define CONFIG_CMD_MEMTEST 350 #define CONFIG_SYS_MEMTEST_START 0x80000000 351 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 352 353 #ifdef CONFIG_SPL_BUILD 354 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 355 #else 356 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 357 #endif 358 359 #define CONFIG_FSL_MEMAC 360 361 /* MMC */ 362 #define CONFIG_FSL_ESDHC 363 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 364 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \ 365 QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER) 366 367 /* Initial environment variables */ 368 #ifdef CONFIG_SECURE_BOOT 369 #undef CONFIG_EXTRA_ENV_SETTINGS 370 #define CONFIG_EXTRA_ENV_SETTINGS \ 371 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 372 "loadaddr=0x90100000\0" \ 373 "kernel_addr=0x100000\0" \ 374 "ramdisk_addr=0x800000\0" \ 375 "ramdisk_size=0x2000000\0" \ 376 "fdt_high=0xa0000000\0" \ 377 "initrd_high=0xffffffffffffffff\0" \ 378 "kernel_start=0x1000000\0" \ 379 "kernel_load=0xa0000000\0" \ 380 "kernel_size=0x2800000\0" \ 381 "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;" \ 382 "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \ 383 "sf read 0xa0e00000 0xe00000 0x100000;" \ 384 "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;" \ 385 "fsl_mc start mc 0xa0a00000 0xa0e00000\0" \ 386 "mcmemsize=0x70000000 \0" 387 #else /* if !(CONFIG_SECURE_BOOT) */ 388 #if defined(CONFIG_QSPI_BOOT) 389 #undef CONFIG_EXTRA_ENV_SETTINGS 390 #define CONFIG_EXTRA_ENV_SETTINGS \ 391 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 392 "loadaddr=0x90100000\0" \ 393 "kernel_addr=0x100000\0" \ 394 "ramdisk_addr=0x800000\0" \ 395 "ramdisk_size=0x2000000\0" \ 396 "fdt_high=0xa0000000\0" \ 397 "initrd_high=0xffffffffffffffff\0" \ 398 "kernel_start=0x1000000\0" \ 399 "kernel_load=0xa0000000\0" \ 400 "kernel_size=0x2800000\0" \ 401 "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ 402 "sf read 0x80100000 0xE00000 0x100000;" \ 403 "fsl_mc start mc 0x80000000 0x80100000\0" \ 404 "mcmemsize=0x70000000 \0" 405 #elif defined(CONFIG_SD_BOOT) 406 #undef CONFIG_EXTRA_ENV_SETTINGS 407 #define CONFIG_EXTRA_ENV_SETTINGS \ 408 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 409 "loadaddr=0x90100000\0" \ 410 "kernel_addr=0x800\0" \ 411 "ramdisk_addr=0x800000\0" \ 412 "ramdisk_size=0x2000000\0" \ 413 "fdt_high=0xa0000000\0" \ 414 "initrd_high=0xffffffffffffffff\0" \ 415 "kernel_start=0x8000\0" \ 416 "kernel_load=0xa0000000\0" \ 417 "kernel_size=0x14000\0" \ 418 "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ 419 "mmc read 0x80100000 0x7000 0x800;" \ 420 "fsl_mc start mc 0x80000000 0x80100000\0" \ 421 "mcmemsize=0x70000000 \0" 422 #else /* NOR BOOT */ 423 #undef CONFIG_EXTRA_ENV_SETTINGS 424 #define CONFIG_EXTRA_ENV_SETTINGS \ 425 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 426 "loadaddr=0x90100000\0" \ 427 "kernel_addr=0x100000\0" \ 428 "ramdisk_addr=0x800000\0" \ 429 "ramdisk_size=0x2000000\0" \ 430 "fdt_high=0xa0000000\0" \ 431 "initrd_high=0xffffffffffffffff\0" \ 432 "kernel_start=0x1000000\0" \ 433 "kernel_load=0xa0000000\0" \ 434 "kernel_size=0x2800000\0" \ 435 "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0" \ 436 "mcmemsize=0x70000000 \0" 437 #endif 438 #endif /* CONFIG_SECURE_BOOT */ 439 440 #ifdef CONFIG_FSL_MC_ENET 441 #define CONFIG_FSL_MEMAC 442 #define CONFIG_PHYLIB 443 #define CONFIG_PHYLIB_10G 444 #define CONFIG_PHY_VITESSE 445 #define CONFIG_PHY_REALTEK 446 #define CONFIG_PHY_TERANETICS 447 #define RGMII_PHY1_ADDR 0x1 448 #define RGMII_PHY2_ADDR 0x2 449 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 450 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d 451 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 452 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 453 454 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0 455 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1 456 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2 457 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3 458 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4 459 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5 460 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6 461 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7 462 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8 463 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9 464 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa 465 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb 466 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc 467 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd 468 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe 469 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf 470 471 #define CONFIG_MII /* MII PHY management */ 472 #define CONFIG_ETHPRIME "DPMAC1@xgmii" 473 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 474 475 #endif 476 477 #define BOOT_TARGET_DEVICES(func) \ 478 func(USB, usb, 0) \ 479 func(MMC, mmc, 0) \ 480 func(SCSI, scsi, 0) \ 481 func(DHCP, dhcp, na) 482 #include <config_distro_bootcmd.h> 483 484 #include <asm/fsl_secure_boot.h> 485 486 #endif /* __LS1088A_QDS_H */ 487