xref: /openbmc/u-boot/include/configs/ls1088aqds.h (revision 872cfa20)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017 NXP
4  */
5 
6 #ifndef __LS1088A_QDS_H
7 #define __LS1088A_QDS_H
8 
9 #include "ls1088a_common.h"
10 
11 
12 #ifndef __ASSEMBLY__
13 unsigned long get_board_sys_clk(void);
14 unsigned long get_board_ddr_clk(void);
15 #endif
16 
17 #ifdef CONFIG_TFABOOT
18 #define CONFIG_SYS_MMC_ENV_DEV		0
19 
20 #define CONFIG_ENV_SIZE			0x20000
21 #define CONFIG_ENV_OFFSET		0x500000
22 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
23 					 CONFIG_ENV_OFFSET)
24 #define CONFIG_ENV_SECT_SIZE		0x40000
25 #else
26 #if defined(CONFIG_QSPI_BOOT)
27 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
28 #define CONFIG_ENV_SECT_SIZE		0x40000
29 #elif defined(CONFIG_SD_BOOT)
30 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
31 #define CONFIG_SYS_MMC_ENV_DEV		0
32 #define CONFIG_ENV_SIZE			0x2000
33 #else
34 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
35 #define CONFIG_ENV_SECT_SIZE		0x20000
36 #define CONFIG_ENV_SIZE			0x20000
37 #endif
38 #endif
39 
40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
41 #define CONFIG_QIXIS_I2C_ACCESS
42 #define SYS_NO_FLASH
43 
44 #undef CONFIG_CMD_IMLS
45 #define CONFIG_SYS_CLK_FREQ		100000000
46 #define CONFIG_DDR_CLK_FREQ		100000000
47 #else
48 #define CONFIG_QIXIS_I2C_ACCESS
49 #define CONFIG_SYS_I2C_EARLY_INIT
50 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
51 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
52 #endif
53 
54 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
55 #define COUNTER_FREQUENCY		25000000	/* 25MHz */
56 
57 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
58 
59 #define CONFIG_DDR_SPD
60 #define CONFIG_DDR_ECC
61 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
62 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
63 #define SPD_EEPROM_ADDRESS		0x51
64 #define CONFIG_SYS_SPD_BUS_NUM		0
65 
66 
67 /*
68  * IFC Definitions
69  */
70 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
71 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
72 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
73 #define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64*1024*1024)
74 
75 #define CONFIG_SYS_NOR0_CSPR					\
76 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
77 	CSPR_PORT_SIZE_16					| \
78 	CSPR_MSEL_NOR						| \
79 	CSPR_V)
80 #define CONFIG_SYS_NOR0_CSPR_EARLY				\
81 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
82 	CSPR_PORT_SIZE_16					| \
83 	CSPR_MSEL_NOR						| \
84 	CSPR_V)
85 #define CONFIG_SYS_NOR1_CSPR					\
86 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)		| \
87 	CSPR_PORT_SIZE_16					| \
88 	CSPR_MSEL_NOR						| \
89 	CSPR_V)
90 #define CONFIG_SYS_NOR1_CSPR_EARLY				\
91 	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)	| \
92 	CSPR_PORT_SIZE_16					| \
93 	CSPR_MSEL_NOR						| \
94 	CSPR_V)
95 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
96 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
97 				FTIM0_NOR_TEADC(0x5) | \
98 				FTIM0_NOR_TAVDS(0x6) | \
99 				FTIM0_NOR_TEAHC(0x5))
100 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
101 				FTIM1_NOR_TRAD_NOR(0x1a) | \
102 				FTIM1_NOR_TSEQRAD_NOR(0x13))
103 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x8) | \
104 				FTIM2_NOR_TCH(0x8) | \
105 				FTIM2_NOR_TWPH(0xe) | \
106 				FTIM2_NOR_TWP(0x1c))
107 #define CONFIG_SYS_NOR_FTIM3	0x04000000
108 #define CONFIG_SYS_IFC_CCR	0x01000000
109 
110 #ifndef SYS_NO_FLASH
111 #define CONFIG_SYS_FLASH_QUIET_TEST
112 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
113 
114 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
115 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
116 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
117 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
118 
119 #define CONFIG_SYS_FLASH_EMPTY_INFO
120 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
121 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
122 #endif
123 #endif
124 
125 #define CONFIG_NAND_FSL_IFC
126 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
127 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
128 
129 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
130 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
131 				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
132 				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
133 				| CSPR_V)
134 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
135 
136 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
137 				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
138 				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
139 				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
140 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
141 				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
142 				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
143 
144 #define CONFIG_SYS_NAND_ONFI_DETECTION
145 
146 /* ONFI NAND Flash mode0 Timing Params */
147 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
148 					FTIM0_NAND_TWP(0x18)   | \
149 					FTIM0_NAND_TWCHT(0x07) | \
150 					FTIM0_NAND_TWH(0x0a))
151 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
152 					FTIM1_NAND_TWBE(0x39)  | \
153 					FTIM1_NAND_TRR(0x0e)   | \
154 					FTIM1_NAND_TRP(0x18))
155 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
156 					FTIM2_NAND_TREH(0x0a) | \
157 					FTIM2_NAND_TWHRE(0x1e))
158 #define CONFIG_SYS_NAND_FTIM3		0x0
159 
160 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
161 #define CONFIG_SYS_MAX_NAND_DEVICE	1
162 #define CONFIG_MTD_NAND_VERIFY_WRITE
163 #define CONFIG_CMD_NAND
164 
165 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
166 
167 #define CONFIG_FSL_QIXIS
168 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
169 #define QIXIS_LBMAP_SWITCH		6
170 #define QIXIS_QMAP_MASK			0xe0
171 #define QIXIS_QMAP_SHIFT		5
172 #define QIXIS_LBMAP_MASK		0x0f
173 #define QIXIS_LBMAP_SHIFT		0
174 #define QIXIS_LBMAP_DFLTBANK		0x0e
175 #define QIXIS_LBMAP_ALTBANK		0x2e
176 #define QIXIS_LBMAP_SD			0x00
177 #define QIXIS_LBMAP_EMMC		0x00
178 #define QIXIS_LBMAP_IFC			0x00
179 #define QIXIS_LBMAP_SD_QSPI		0x0e
180 #define QIXIS_LBMAP_QSPI		0x0e
181 #define QIXIS_RCW_SRC_IFC		0x25
182 #define QIXIS_RCW_SRC_SD		0x40
183 #define QIXIS_RCW_SRC_EMMC		0x41
184 #define QIXIS_RCW_SRC_QSPI		0x62
185 #define QIXIS_RST_CTL_RESET		0x41
186 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
187 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
188 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
189 #define	QIXIS_RST_FORCE_MEM		0x01
190 #define QIXIS_STAT_PRES1		0xb
191 #define QIXIS_SDID_MASK			0x07
192 #define QIXIS_ESDHC_NO_ADAPTER		0x7
193 
194 #define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
195 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
196 					| CSPR_PORT_SIZE_8 \
197 					| CSPR_MSEL_GPCM \
198 					| CSPR_V)
199 #define SYS_FPGA_CSPR_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
200 					| CSPR_PORT_SIZE_8 \
201 					| CSPR_MSEL_GPCM \
202 					| CSPR_V)
203 
204 #define SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
205 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
206 #define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(0)
207 #else
208 #define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(12)
209 #endif
210 /* QIXIS Timing parameters*/
211 #define SYS_FPGA_CS_FTIM0	(FTIM0_GPCM_TACSE(0x0e) | \
212 					FTIM0_GPCM_TEADC(0x0e) | \
213 					FTIM0_GPCM_TEAHC(0x0e))
214 #define SYS_FPGA_CS_FTIM1	(FTIM1_GPCM_TACO(0xff) | \
215 					FTIM1_GPCM_TRAD(0x3f))
216 #define SYS_FPGA_CS_FTIM2	(FTIM2_GPCM_TCS(0xf) | \
217 					FTIM2_GPCM_TCH(0xf) | \
218 					FTIM2_GPCM_TWP(0x3E))
219 #define SYS_FPGA_CS_FTIM3	0x0
220 
221 #ifdef CONFIG_TFABOOT
222 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
223 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
224 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
225 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
226 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
227 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
228 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
229 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
230 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
231 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
232 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
233 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
234 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
235 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
236 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
237 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
238 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
239 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
240 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
241 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
242 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
243 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
244 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
245 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
246 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
247 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
248 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
249 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
250 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
251 #define CONFIG_SYS_CSPR3_FINAL		SYS_FPGA_CSPR_FINAL
252 #define CONFIG_SYS_AMASK3		SYS_FPGA_AMASK
253 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
254 #define CONFIG_SYS_CS3_FTIM0		SYS_FPGA_CS_FTIM0
255 #define CONFIG_SYS_CS3_FTIM1		SYS_FPGA_CS_FTIM1
256 #define CONFIG_SYS_CS3_FTIM2		SYS_FPGA_CS_FTIM2
257 #define CONFIG_SYS_CS3_FTIM3		SYS_FPGA_CS_FTIM3
258 #else
259 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
260 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
261 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
262 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
263 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
264 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
265 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
266 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
267 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
268 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_FPGA_CSPR_EXT
269 #define CONFIG_SYS_CSPR2		CONFIG_SYS_FPGA_CSPR
270 #define CONFIG_SYS_CSPR2_FINAL		SYS_FPGA_CSPR_FINAL
271 #define CONFIG_SYS_AMASK2		SYS_FPGA_AMASK
272 #define CONFIG_SYS_CSOR2		CONFIG_SYS_FPGA_CSOR
273 #define CONFIG_SYS_CS2_FTIM0		SYS_FPGA_CS_FTIM0
274 #define CONFIG_SYS_CS2_FTIM1		SYS_FPGA_CS_FTIM1
275 #define CONFIG_SYS_CS2_FTIM2		SYS_FPGA_CS_FTIM2
276 #define CONFIG_SYS_CS2_FTIM3		SYS_FPGA_CS_FTIM3
277 #else
278 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
279 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
280 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
281 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
282 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
283 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
284 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
285 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
286 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
287 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
288 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR_EARLY
289 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR1_CSPR
290 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK_EARLY
291 #define CONFIG_SYS_AMASK1_FINAL		CONFIG_SYS_NOR_AMASK
292 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
293 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
294 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
295 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
296 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
297 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
298 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
299 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
300 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
301 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
302 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
303 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
304 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
305 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
306 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
307 #define CONFIG_SYS_CSPR3_FINAL		SYS_FPGA_CSPR_FINAL
308 #define CONFIG_SYS_AMASK3		SYS_FPGA_AMASK
309 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
310 #define CONFIG_SYS_CS3_FTIM0		SYS_FPGA_CS_FTIM0
311 #define CONFIG_SYS_CS3_FTIM1		SYS_FPGA_CS_FTIM1
312 #define CONFIG_SYS_CS3_FTIM2		SYS_FPGA_CS_FTIM2
313 #define CONFIG_SYS_CS3_FTIM3		SYS_FPGA_CS_FTIM3
314 #endif
315 #endif
316 
317 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
318 
319 /*
320  * I2C bus multiplexer
321  */
322 #define I2C_MUX_PCA_ADDR_PRI		0x77
323 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
324 #define I2C_RETIMER_ADDR		0x18
325 #define I2C_RETIMER_ADDR2		0x19
326 #define I2C_MUX_CH_DEFAULT		0x8
327 #define I2C_MUX_CH5			0xD
328 
329 #define I2C_MUX_CH_VOL_MONITOR          0xA
330 
331 /* Voltage monitor on channel 2*/
332 #define I2C_VOL_MONITOR_ADDR           0x63
333 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
334 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
335 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
336 #define I2C_SVDD_MONITOR_ADDR           0x4F
337 
338 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
339 #define CONFIG_VID
340 
341 /* The lowest and highest voltage allowed for LS1088AQDS */
342 #define VDD_MV_MIN			819
343 #define VDD_MV_MAX			1212
344 
345 #define CONFIG_VOL_MONITOR_LTC3882_SET
346 #define CONFIG_VOL_MONITOR_LTC3882_READ
347 
348 /* PM Bus commands code for LTC3882*/
349 #define PMBUS_CMD_PAGE                  0x0
350 #define PMBUS_CMD_READ_VOUT             0x8B
351 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
352 #define PMBUS_CMD_VOUT_COMMAND          0x21
353 
354 #define PWM_CHANNEL0                    0x0
355 
356 /*
357 * RTC configuration
358 */
359 #define RTC
360 #define CONFIG_RTC_PCF8563 1
361 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
362 #define CONFIG_CMD_DATE
363 
364 /* EEPROM */
365 #define CONFIG_ID_EEPROM
366 #define CONFIG_SYS_I2C_EEPROM_NXID
367 #define CONFIG_SYS_EEPROM_BUS_NUM		0
368 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
369 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
370 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
371 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
372 
373 /* QSPI device */
374 #if defined(CONFIG_TFABOOT) || \
375 	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
376 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
377 #define FSL_QSPI_FLASH_NUM		2
378 
379 #endif
380 
381 #ifdef CONFIG_FSL_DSPI
382 #define CONFIG_SPI_FLASH_STMICRO
383 #define CONFIG_SPI_FLASH_SST
384 #define CONFIG_SPI_FLASH_EON
385 #if !defined(CONFIG_TFABOOT) && \
386 	!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
387 #define CONFIG_SF_DEFAULT_BUS		1
388 #define CONFIG_SF_DEFAULT_CS		0
389 #endif
390 #endif
391 
392 #define CONFIG_CMD_MEMINFO
393 #define CONFIG_SYS_MEMTEST_START	0x80000000
394 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
395 
396 #ifdef CONFIG_SPL_BUILD
397 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
398 #else
399 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
400 #endif
401 
402 #define CONFIG_FSL_MEMAC
403 
404 /*  MMC  */
405 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
406 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
407 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
408 
409 /* Initial environment variables */
410 #ifdef CONFIG_SECURE_BOOT
411 #undef CONFIG_EXTRA_ENV_SETTINGS
412 #define CONFIG_EXTRA_ENV_SETTINGS		\
413 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
414 	"loadaddr=0x90100000\0"			\
415 	"kernel_addr=0x100000\0"		\
416 	"ramdisk_addr=0x800000\0"		\
417 	"ramdisk_size=0x2000000\0"		\
418 	"fdt_high=0xa0000000\0"			\
419 	"initrd_high=0xffffffffffffffff\0"	\
420 	"kernel_start=0x1000000\0"		\
421 	"kernel_load=0xa0000000\0"		\
422 	"kernel_size=0x2800000\0"		\
423 	"mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"	\
424 	"sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;"	\
425 	"sf read 0xa0e00000 0xe00000 0x100000;"	\
426 	"sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"	\
427 	"fsl_mc start mc 0xa0a00000 0xa0e00000\0"			\
428 	"mcmemsize=0x70000000 \0"
429 #else /* if !(CONFIG_SECURE_BOOT) */
430 #ifdef CONFIG_TFABOOT
431 #define QSPI_MC_INIT_CMD				\
432 	"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
433 	"sf read 0x80100000 0xE00000 0x100000;" \
434 	"fsl_mc start mc 0x80000000 0x80100000\0"
435 #define SD_MC_INIT_CMD				\
436 	"mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
437 	"mmc read 0x80100000 0x7000 0x800;" \
438 	"fsl_mc start mc 0x80000000 0x80100000\0"
439 #define IFC_MC_INIT_CMD				\
440 	"fsl_mc start mc 0x580A00000 0x580E00000\0"
441 
442 #undef CONFIG_EXTRA_ENV_SETTINGS
443 #define CONFIG_EXTRA_ENV_SETTINGS		\
444 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
445 	"loadaddr=0x90100000\0"			\
446 	"kernel_addr=0x100000\0"		\
447 	"kernel_addr_sd=0x800\0"                \
448 	"ramdisk_addr=0x800000\0"		\
449 	"ramdisk_size=0x2000000\0"		\
450 	"fdt_high=0xa0000000\0"			\
451 	"initrd_high=0xffffffffffffffff\0"	\
452 	"kernel_start=0x1000000\0"		\
453 	"kernel_start_sd=0x8000\0"              \
454 	"kernel_load=0xa0000000\0"		\
455 	"kernel_size=0x2800000\0"		\
456 	"kernel_size_sd=0x14000\0"               \
457 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
458 	"sf read 0x80100000 0xE00000 0x100000;" \
459 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
460 	"mcmemsize=0x70000000 \0"
461 #define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0;" \
462 				"sf read 0x80001000 0xd00000 0x100000;"\
463 				" fsl_mc lazyapply dpl 0x80001000 &&" \
464 				" sf read $kernel_load $kernel_start" \
465 				" $kernel_size && bootm $kernel_load"
466 #define SD_BOOTCOMMAND		"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
467 				" fsl_mc lazyapply dpl 0x80001000 &&" \
468 				" mmc read $kernel_load $kernel_start_sd" \
469 				" $kernel_size_sd && bootm $kernel_load"
470 #define IFC_NOR_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
471 				" cp.b $kernel_start $kernel_load" \
472 				" $kernel_size && bootm $kernel_load"
473 #else
474 #if defined(CONFIG_QSPI_BOOT)
475 #undef CONFIG_EXTRA_ENV_SETTINGS
476 #define CONFIG_EXTRA_ENV_SETTINGS		\
477 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
478 	"loadaddr=0x90100000\0"			\
479 	"kernel_addr=0x100000\0"		\
480 	"ramdisk_addr=0x800000\0"		\
481 	"ramdisk_size=0x2000000\0"		\
482 	"fdt_high=0xa0000000\0"			\
483 	"initrd_high=0xffffffffffffffff\0"	\
484 	"kernel_start=0x1000000\0"		\
485 	"kernel_load=0xa0000000\0"		\
486 	"kernel_size=0x2800000\0"		\
487 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
488 	"sf read 0x80100000 0xE00000 0x100000;" \
489 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
490 	"mcmemsize=0x70000000 \0"
491 #elif defined(CONFIG_SD_BOOT)
492 #undef CONFIG_EXTRA_ENV_SETTINGS
493 #define CONFIG_EXTRA_ENV_SETTINGS               \
494 	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
495 	"loadaddr=0x90100000\0"                 \
496 	"kernel_addr=0x800\0"                \
497 	"ramdisk_addr=0x800000\0"               \
498 	"ramdisk_size=0x2000000\0"              \
499 	"fdt_high=0xa0000000\0"                 \
500 	"initrd_high=0xffffffffffffffff\0"      \
501 	"kernel_start=0x8000\0"              \
502 	"kernel_load=0xa0000000\0"              \
503 	"kernel_size=0x14000\0"               \
504 	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
505 	"mmc read 0x80100000 0x7000 0x800;" \
506 	"fsl_mc start mc 0x80000000 0x80100000\0"       \
507 	"mcmemsize=0x70000000 \0"
508 #else	/* NOR BOOT */
509 #undef CONFIG_EXTRA_ENV_SETTINGS
510 #define CONFIG_EXTRA_ENV_SETTINGS		\
511 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
512 	"loadaddr=0x90100000\0"			\
513 	"kernel_addr=0x100000\0"		\
514 	"ramdisk_addr=0x800000\0"		\
515 	"ramdisk_size=0x2000000\0"		\
516 	"fdt_high=0xa0000000\0"			\
517 	"initrd_high=0xffffffffffffffff\0"	\
518 	"kernel_start=0x1000000\0"		\
519 	"kernel_load=0xa0000000\0"		\
520 	"kernel_size=0x2800000\0"		\
521 	"mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"	\
522 	"mcmemsize=0x70000000 \0"
523 #endif
524 #endif /* CONFIG_TFABOOT */
525 #endif /* CONFIG_SECURE_BOOT */
526 
527 #ifdef CONFIG_FSL_MC_ENET
528 #define CONFIG_FSL_MEMAC
529 #define	CONFIG_PHYLIB
530 #define CONFIG_PHYLIB_10G
531 #define CONFIG_PHY_VITESSE
532 #define CONFIG_PHY_REALTEK
533 #define CONFIG_PHY_TERANETICS
534 #define RGMII_PHY1_ADDR		0x1
535 #define RGMII_PHY2_ADDR		0x2
536 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
537 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
538 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
539 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
540 
541 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
542 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
543 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
544 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
545 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
546 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
547 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
548 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
549 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
550 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
551 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
552 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
553 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
554 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
555 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
556 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
557 
558 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
559 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
560 
561 #endif
562 
563 #define BOOT_TARGET_DEVICES(func) \
564 	func(USB, usb, 0) \
565 	func(MMC, mmc, 0) \
566 	func(SCSI, scsi, 0) \
567 	func(DHCP, dhcp, na)
568 #include <config_distro_bootcmd.h>
569 
570 #include <asm/fsl_secure_boot.h>
571 
572 #endif /* __LS1088A_QDS_H */
573