1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor 4 */ 5 6 #ifndef __LS1046ARDB_H__ 7 #define __LS1046ARDB_H__ 8 9 #include "ls1046a_common.h" 10 11 #define CONFIG_SYS_CLK_FREQ 100000000 12 #define CONFIG_DDR_CLK_FREQ 100000000 13 14 #define CONFIG_LAYERSCAPE_NS_ACCESS 15 16 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 17 /* Physical Memory Map */ 18 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 19 20 #define CONFIG_DDR_SPD 21 #define SPD_EEPROM_ADDRESS 0x51 22 #define CONFIG_SYS_SPD_BUS_NUM 0 23 24 #define CONFIG_DDR_ECC 25 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 26 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 27 #define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ 28 #ifndef CONFIG_SPL 29 #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ 30 #endif 31 32 #ifdef CONFIG_SD_BOOT 33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg 34 #ifdef CONFIG_EMMC_BOOT 35 #define CONFIG_SYS_FSL_PBL_RCW \ 36 board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg 37 #else 38 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg 39 #endif 40 #elif defined(CONFIG_QSPI_BOOT) 41 #define CONFIG_SYS_FSL_PBL_RCW \ 42 board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg 43 #define CONFIG_SYS_FSL_PBL_PBI \ 44 board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg 45 #define CONFIG_SYS_UBOOT_BASE 0x40100000 46 #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 47 #endif 48 49 #ifndef SPL_NO_IFC 50 /* IFC */ 51 #define CONFIG_FSL_IFC 52 /* 53 * NAND Flash Definitions 54 */ 55 #define CONFIG_NAND_FSL_IFC 56 #endif 57 58 #define CONFIG_SYS_NAND_BASE 0x7e800000 59 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 60 61 #define CONFIG_SYS_NAND_CSPR_EXT (0x0) 62 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 63 | CSPR_PORT_SIZE_8 \ 64 | CSPR_MSEL_NAND \ 65 | CSPR_V) 66 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) 67 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 68 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 69 | CSOR_NAND_ECC_MODE_8 /* 8-bit ECC */ \ 70 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 71 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 72 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 73 | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ 74 75 #define CONFIG_SYS_NAND_ONFI_DETECTION 76 77 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ 78 FTIM0_NAND_TWP(0x18) | \ 79 FTIM0_NAND_TWCHT(0x7) | \ 80 FTIM0_NAND_TWH(0xa)) 81 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 82 FTIM1_NAND_TWBE(0x39) | \ 83 FTIM1_NAND_TRR(0xe) | \ 84 FTIM1_NAND_TRP(0x18)) 85 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ 86 FTIM2_NAND_TREH(0xa) | \ 87 FTIM2_NAND_TWHRE(0x1e)) 88 #define CONFIG_SYS_NAND_FTIM3 0x0 89 90 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 91 #define CONFIG_SYS_MAX_NAND_DEVICE 1 92 #define CONFIG_MTD_NAND_VERIFY_WRITE 93 94 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 95 96 /* 97 * CPLD 98 */ 99 #define CONFIG_SYS_CPLD_BASE 0x7fb00000 100 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 101 102 #define CONFIG_SYS_CPLD_CSPR_EXT (0x0) 103 #define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ 104 CSPR_PORT_SIZE_8 | \ 105 CSPR_MSEL_GPCM | \ 106 CSPR_V) 107 #define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) 108 #define CONFIG_SYS_CPLD_CSOR CSOR_NOR_ADM_SHIFT(16) 109 110 /* CPLD Timing parameters for IFC GPCM */ 111 #define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 112 FTIM0_GPCM_TEADC(0x0e) | \ 113 FTIM0_GPCM_TEAHC(0x0e)) 114 #define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 115 FTIM1_GPCM_TRAD(0x3f)) 116 #define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 117 FTIM2_GPCM_TCH(0xf) | \ 118 FTIM2_GPCM_TWP(0x3E)) 119 #define CONFIG_SYS_CPLD_FTIM3 0x0 120 121 /* IFC Timing Params */ 122 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 123 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 124 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 125 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 126 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 127 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 128 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 129 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 130 131 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT 132 #define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR 133 #define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK 134 #define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR 135 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0 136 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1 137 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2 138 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 139 140 /* EEPROM */ 141 #define CONFIG_ID_EEPROM 142 #define CONFIG_SYS_I2C_EEPROM_NXID 143 #define CONFIG_SYS_EEPROM_BUS_NUM 0 144 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 145 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 146 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 147 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 148 #define I2C_RETIMER_ADDR 0x18 149 150 /* PMIC */ 151 #define CONFIG_POWER 152 #ifdef CONFIG_POWER 153 #define CONFIG_POWER_I2C 154 #endif 155 156 /* 157 * Environment 158 */ 159 #ifndef SPL_NO_ENV 160 #define CONFIG_ENV_OVERWRITE 161 #endif 162 163 #if defined(CONFIG_SD_BOOT) 164 #define CONFIG_SYS_MMC_ENV_DEV 0 165 #define CONFIG_ENV_OFFSET (3 * 1024 * 1024) 166 #define CONFIG_ENV_SIZE 0x2000 167 #else 168 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 169 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ 170 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ 171 #endif 172 173 #define AQR105_IRQ_MASK 0x80000000 174 /* FMan */ 175 #ifndef SPL_NO_FMAN 176 177 #ifdef CONFIG_NET 178 #define CONFIG_PHY_REALTEK 179 #endif 180 181 #ifdef CONFIG_SYS_DPAA_FMAN 182 #define CONFIG_FMAN_ENET 183 #define RGMII_PHY1_ADDR 0x1 184 #define RGMII_PHY2_ADDR 0x2 185 186 #define SGMII_PHY1_ADDR 0x3 187 #define SGMII_PHY2_ADDR 0x4 188 189 #define FM1_10GEC1_PHY_ADDR 0x0 190 191 #define FDT_SEQ_MACADDR_FROM_ENV 192 193 #define CONFIG_ETHPRIME "FM1@DTSEC3" 194 #endif 195 196 #endif 197 198 /* QSPI device */ 199 #ifndef SPL_NO_QSPI 200 #ifdef CONFIG_FSL_QSPI 201 #define CONFIG_SPI_FLASH_SPANSION 202 #define FSL_QSPI_FLASH_SIZE (1 << 26) 203 #define FSL_QSPI_FLASH_NUM 2 204 #endif 205 #endif 206 207 #ifndef SPL_NO_MISC 208 #undef CONFIG_BOOTCOMMAND 209 #if defined(CONFIG_QSPI_BOOT) 210 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ 211 "env exists secureboot && esbc_halt;;" 212 #elif defined(CONFIG_SD_BOOT) 213 #define CONFIG_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ 214 "env exists secureboot && esbc_halt;" 215 #endif 216 #endif 217 218 #include <asm/fsl_secure_boot.h> 219 220 #endif /* __LS1046ARDB_H__ */ 221