1 /* 2 * Copyright 2016 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1046A_COMMON_H 8 #define __LS1046A_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_MP 13 #define CONFIG_SYS_FSL_CLK 14 #define CONFIG_GICV2 15 16 #include <asm/arch/config.h> 17 18 /* Link Definitions */ 19 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 20 21 #define CONFIG_SUPPORT_RAW_INITRD 22 23 #define CONFIG_SKIP_LOWLEVEL_INIT 24 #define CONFIG_BOARD_EARLY_INIT_F 1 25 26 #define CONFIG_VERY_BIG_RAM 27 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 28 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 29 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 30 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 31 32 #define CPU_RELEASE_ADDR secondary_boot_func 33 34 /* Generic Timer Definitions */ 35 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 36 37 /* Size of malloc() pool */ 38 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 39 40 /* Serial Port */ 41 #define CONFIG_CONS_INDEX 1 42 #define CONFIG_SYS_NS16550_SERIAL 43 #define CONFIG_SYS_NS16550_REG_SIZE 1 44 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 45 46 #define CONFIG_BAUDRATE 115200 47 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 48 49 /* SD boot SPL */ 50 #ifdef CONFIG_SD_BOOT 51 #define CONFIG_SPL_FRAMEWORK 52 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 53 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 54 #define CONFIG_SPL_LIBCOMMON_SUPPORT 55 #define CONFIG_SPL_LIBGENERIC_SUPPORT 56 #define CONFIG_SPL_ENV_SUPPORT 57 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 58 #define CONFIG_SPL_WATCHDOG_SUPPORT 59 #define CONFIG_SPL_I2C_SUPPORT 60 #define CONFIG_SPL_SERIAL_SUPPORT 61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 62 63 #define CONFIG_SPL_MMC_SUPPORT 64 #define CONFIG_SPL_TEXT_BASE 0x10000000 65 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ 66 #define CONFIG_SPL_STACK 0x10020000 67 #define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */ 68 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 69 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 70 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 71 CONFIG_SPL_BSS_MAX_SIZE) 72 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 73 #define CONFIG_SYS_MONITOR_LEN 0xa0000 74 #endif 75 76 /* NAND SPL */ 77 #ifdef CONFIG_NAND_BOOT 78 #define CONFIG_SPL_PBL_PAD 79 #define CONFIG_SPL_FRAMEWORK 80 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 81 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 82 #define CONFIG_SPL_LIBCOMMON_SUPPORT 83 #define CONFIG_SPL_LIBGENERIC_SUPPORT 84 #define CONFIG_SPL_ENV_SUPPORT 85 #define CONFIG_SPL_WATCHDOG_SUPPORT 86 #define CONFIG_SPL_I2C_SUPPORT 87 #define CONFIG_SPL_SERIAL_SUPPORT 88 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 89 90 #define CONFIG_SPL_NAND_SUPPORT 91 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 92 #define CONFIG_SPL_TEXT_BASE 0x10000000 93 #define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ 94 #define CONFIG_SPL_STACK 0x1001f000 95 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 96 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 97 98 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 99 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 100 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 101 CONFIG_SPL_BSS_MAX_SIZE) 102 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 103 #define CONFIG_SYS_MONITOR_LEN 0xa0000 104 #endif 105 106 /* I2C */ 107 #define CONFIG_SYS_I2C 108 #define CONFIG_SYS_I2C_MXC 109 #define CONFIG_SYS_I2C_MXC_I2C1 110 #define CONFIG_SYS_I2C_MXC_I2C2 111 #define CONFIG_SYS_I2C_MXC_I2C3 112 #define CONFIG_SYS_I2C_MXC_I2C4 113 114 /* Command line configuration */ 115 #define CONFIG_CMD_ENV 116 117 /* MMC */ 118 #define CONFIG_MMC 119 #ifdef CONFIG_MMC 120 #define CONFIG_FSL_ESDHC 121 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 122 #define CONFIG_GENERIC_MMC 123 #define CONFIG_DOS_PARTITION 124 #endif 125 126 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 127 128 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 129 130 /* FMan ucode */ 131 #define CONFIG_SYS_DPAA_FMAN 132 #ifdef CONFIG_SYS_DPAA_FMAN 133 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 134 135 #ifdef CONFIG_SD_BOOT 136 /* 137 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 138 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 139 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 140 */ 141 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 142 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 143 #elif defined(CONFIG_QSPI_BOOT) 144 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 145 #define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 146 #define CONFIG_ENV_SPI_BUS 0 147 #define CONFIG_ENV_SPI_CS 0 148 #define CONFIG_ENV_SPI_MAX_HZ 1000000 149 #define CONFIG_ENV_SPI_MODE 0x03 150 #elif defined(CONFIG_NAND_BOOT) 151 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 152 #define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 153 #else 154 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 155 #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 156 #endif 157 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 158 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 159 #endif 160 161 /* Miscellaneous configurable options */ 162 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 163 #define CONFIG_ARCH_EARLY_INIT_R 164 #define CONFIG_BOARD_LATE_INIT 165 166 #define CONFIG_HWCONFIG 167 #define HWCONFIG_BUFFER_SIZE 128 168 169 /* Initial environment variables */ 170 #define CONFIG_EXTRA_ENV_SETTINGS \ 171 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 172 "loadaddr=0x80100000\0" \ 173 "ramdisk_addr=0x800000\0" \ 174 "ramdisk_size=0x2000000\0" \ 175 "fdt_high=0xffffffffffffffff\0" \ 176 "initrd_high=0xffffffffffffffff\0" \ 177 "kernel_start=0x1000000\0" \ 178 "kernel_load=0xa0000000\0" \ 179 "kernel_size=0x2800000\0" \ 180 "console=ttyS0,115200\0" \ 181 MTDPARTS_DEFAULT "\0" 182 183 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 184 "earlycon=uart8250,mmio,0x21c0500 " \ 185 MTDPARTS_DEFAULT 186 /* Monitor Command Prompt */ 187 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 188 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 189 sizeof(CONFIG_SYS_PROMPT) + 16) 190 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 191 #define CONFIG_SYS_LONGHELP 192 #define CONFIG_CMDLINE_EDITING 1 193 #define CONFIG_AUTO_COMPLETE 194 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 195 196 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 197 198 /* Hash command with SHA acceleration supported in hardware */ 199 #ifdef CONFIG_FSL_CAAM 200 #define CONFIG_CMD_HASH 201 #define CONFIG_SHA_HW_ACCEL 202 #endif 203 204 #endif /* __LS1046A_COMMON_H */ 205