1 /* 2 * Copyright 2016 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1046A_COMMON_H 8 #define __LS1046A_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_MP 13 #define CONFIG_GICV2 14 15 #include <asm/arch/config.h> 16 17 /* Link Definitions */ 18 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 19 20 #define CONFIG_SUPPORT_RAW_INITRD 21 22 #define CONFIG_SKIP_LOWLEVEL_INIT 23 #define CONFIG_BOARD_EARLY_INIT_F 1 24 25 #define CONFIG_VERY_BIG_RAM 26 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 28 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 29 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 30 31 #define CPU_RELEASE_ADDR secondary_boot_func 32 33 /* Generic Timer Definitions */ 34 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 35 36 /* Size of malloc() pool */ 37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 38 39 /* Serial Port */ 40 #define CONFIG_CONS_INDEX 1 41 #define CONFIG_SYS_NS16550_SERIAL 42 #define CONFIG_SYS_NS16550_REG_SIZE 1 43 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) 44 45 #define CONFIG_BAUDRATE 115200 46 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 47 48 /* SD boot SPL */ 49 #ifdef CONFIG_SD_BOOT 50 #define CONFIG_SPL_FRAMEWORK 51 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 52 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 53 #define CONFIG_SPL_LIBCOMMON_SUPPORT 54 #define CONFIG_SPL_LIBGENERIC_SUPPORT 55 #define CONFIG_SPL_ENV_SUPPORT 56 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 57 #define CONFIG_SPL_WATCHDOG_SUPPORT 58 #define CONFIG_SPL_I2C_SUPPORT 59 #define CONFIG_SPL_SERIAL_SUPPORT 60 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 61 62 #define CONFIG_SPL_MMC_SUPPORT 63 #define CONFIG_SPL_TEXT_BASE 0x10000000 64 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ 65 #define CONFIG_SPL_STACK 0x10020000 66 #define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */ 67 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 68 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 69 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 70 CONFIG_SPL_BSS_MAX_SIZE) 71 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 72 #define CONFIG_SYS_MONITOR_LEN 0xa0000 73 #endif 74 75 /* NAND SPL */ 76 #ifdef CONFIG_NAND_BOOT 77 #define CONFIG_SPL_PBL_PAD 78 #define CONFIG_SPL_FRAMEWORK 79 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 80 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 81 #define CONFIG_SPL_LIBCOMMON_SUPPORT 82 #define CONFIG_SPL_LIBGENERIC_SUPPORT 83 #define CONFIG_SPL_ENV_SUPPORT 84 #define CONFIG_SPL_WATCHDOG_SUPPORT 85 #define CONFIG_SPL_I2C_SUPPORT 86 #define CONFIG_SPL_SERIAL_SUPPORT 87 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 88 89 #define CONFIG_SPL_NAND_SUPPORT 90 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 91 #define CONFIG_SPL_TEXT_BASE 0x10000000 92 #define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ 93 #define CONFIG_SPL_STACK 0x1001f000 94 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 95 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 96 97 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 98 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 99 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 100 CONFIG_SPL_BSS_MAX_SIZE) 101 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 102 #define CONFIG_SYS_MONITOR_LEN 0xa0000 103 #endif 104 105 /* I2C */ 106 #define CONFIG_SYS_I2C 107 #define CONFIG_SYS_I2C_MXC 108 #define CONFIG_SYS_I2C_MXC_I2C1 109 #define CONFIG_SYS_I2C_MXC_I2C2 110 #define CONFIG_SYS_I2C_MXC_I2C3 111 #define CONFIG_SYS_I2C_MXC_I2C4 112 113 /* Command line configuration */ 114 #define CONFIG_CMD_ENV 115 116 /* MMC */ 117 #ifdef CONFIG_MMC 118 #define CONFIG_FSL_ESDHC 119 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 120 #define CONFIG_GENERIC_MMC 121 #define CONFIG_DOS_PARTITION 122 #endif 123 124 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 125 126 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 127 128 /* FMan ucode */ 129 #define CONFIG_SYS_DPAA_FMAN 130 #ifdef CONFIG_SYS_DPAA_FMAN 131 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 132 133 #ifdef CONFIG_SD_BOOT 134 /* 135 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 136 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 137 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 138 */ 139 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 140 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 141 #elif defined(CONFIG_QSPI_BOOT) 142 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 143 #define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 144 #define CONFIG_ENV_SPI_BUS 0 145 #define CONFIG_ENV_SPI_CS 0 146 #define CONFIG_ENV_SPI_MAX_HZ 1000000 147 #define CONFIG_ENV_SPI_MODE 0x03 148 #elif defined(CONFIG_NAND_BOOT) 149 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 150 #define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 151 #else 152 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 153 #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 154 #endif 155 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 156 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 157 #endif 158 159 /* Miscellaneous configurable options */ 160 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 161 #define CONFIG_ARCH_EARLY_INIT_R 162 163 #define CONFIG_HWCONFIG 164 #define HWCONFIG_BUFFER_SIZE 128 165 166 /* Initial environment variables */ 167 #define CONFIG_EXTRA_ENV_SETTINGS \ 168 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 169 "loadaddr=0x80100000\0" \ 170 "ramdisk_addr=0x800000\0" \ 171 "ramdisk_size=0x2000000\0" \ 172 "fdt_high=0xffffffffffffffff\0" \ 173 "initrd_high=0xffffffffffffffff\0" \ 174 "kernel_start=0x1000000\0" \ 175 "kernel_load=0xa0000000\0" \ 176 "kernel_size=0x2800000\0" \ 177 "console=ttyS0,115200\0" \ 178 MTDPARTS_DEFAULT "\0" 179 180 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 181 "earlycon=uart8250,mmio,0x21c0500 " \ 182 MTDPARTS_DEFAULT 183 /* Monitor Command Prompt */ 184 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 185 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 186 sizeof(CONFIG_SYS_PROMPT) + 16) 187 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 188 #define CONFIG_SYS_LONGHELP 189 #define CONFIG_CMDLINE_EDITING 1 190 #define CONFIG_AUTO_COMPLETE 191 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 192 193 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 194 195 /* Hash command with SHA acceleration supported in hardware */ 196 #ifdef CONFIG_FSL_CAAM 197 #define CONFIG_CMD_HASH 198 #define CONFIG_SHA_HW_ACCEL 199 #endif 200 201 #endif /* __LS1046A_COMMON_H */ 202