1 /* 2 * Copyright 2016 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1046A_COMMON_H 8 #define __LS1046A_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_MP 13 #define CONFIG_GICV2 14 15 #include <asm/arch/config.h> 16 17 /* Link Definitions */ 18 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 19 20 #define CONFIG_SUPPORT_RAW_INITRD 21 22 #define CONFIG_SKIP_LOWLEVEL_INIT 23 24 #define CONFIG_VERY_BIG_RAM 25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 27 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 28 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 29 30 #define CPU_RELEASE_ADDR secondary_boot_func 31 32 /* Generic Timer Definitions */ 33 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 34 35 /* Size of malloc() pool */ 36 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 37 38 /* Serial Port */ 39 #define CONFIG_CONS_INDEX 1 40 #define CONFIG_SYS_NS16550_SERIAL 41 #define CONFIG_SYS_NS16550_REG_SIZE 1 42 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) 43 44 #define CONFIG_BAUDRATE 115200 45 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 46 47 /* SD boot SPL */ 48 #ifdef CONFIG_SD_BOOT 49 #define CONFIG_SPL_FRAMEWORK 50 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 51 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 52 #define CONFIG_SPL_LIBCOMMON_SUPPORT 53 #define CONFIG_SPL_LIBGENERIC_SUPPORT 54 #define CONFIG_SPL_ENV_SUPPORT 55 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 56 #define CONFIG_SPL_WATCHDOG_SUPPORT 57 #define CONFIG_SPL_I2C_SUPPORT 58 #define CONFIG_SPL_SERIAL_SUPPORT 59 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 60 61 #define CONFIG_SPL_MMC_SUPPORT 62 #define CONFIG_SPL_TEXT_BASE 0x10000000 63 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ 64 #define CONFIG_SPL_STACK 0x10020000 65 #define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */ 66 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 67 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 68 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 69 CONFIG_SPL_BSS_MAX_SIZE) 70 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 71 #define CONFIG_SYS_MONITOR_LEN 0xa0000 72 #endif 73 74 /* NAND SPL */ 75 #ifdef CONFIG_NAND_BOOT 76 #define CONFIG_SPL_PBL_PAD 77 #define CONFIG_SPL_FRAMEWORK 78 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 79 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 80 #define CONFIG_SPL_LIBCOMMON_SUPPORT 81 #define CONFIG_SPL_LIBGENERIC_SUPPORT 82 #define CONFIG_SPL_ENV_SUPPORT 83 #define CONFIG_SPL_WATCHDOG_SUPPORT 84 #define CONFIG_SPL_I2C_SUPPORT 85 #define CONFIG_SPL_SERIAL_SUPPORT 86 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 87 88 #define CONFIG_SPL_NAND_SUPPORT 89 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 90 #define CONFIG_SPL_TEXT_BASE 0x10000000 91 #define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ 92 #define CONFIG_SPL_STACK 0x1001f000 93 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 94 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 95 96 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000 97 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 98 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ 99 CONFIG_SPL_BSS_MAX_SIZE) 100 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 101 #define CONFIG_SYS_MONITOR_LEN 0xa0000 102 #endif 103 104 /* I2C */ 105 #define CONFIG_SYS_I2C 106 #define CONFIG_SYS_I2C_MXC 107 #define CONFIG_SYS_I2C_MXC_I2C1 108 #define CONFIG_SYS_I2C_MXC_I2C2 109 #define CONFIG_SYS_I2C_MXC_I2C3 110 #define CONFIG_SYS_I2C_MXC_I2C4 111 112 /* Command line configuration */ 113 #define CONFIG_CMD_ENV 114 115 /* MMC */ 116 #ifdef CONFIG_MMC 117 #define CONFIG_FSL_ESDHC 118 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 119 #endif 120 121 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 122 123 /* FMan ucode */ 124 #define CONFIG_SYS_DPAA_FMAN 125 #ifdef CONFIG_SYS_DPAA_FMAN 126 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 127 128 #ifdef CONFIG_SD_BOOT 129 /* 130 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 131 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 132 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 133 */ 134 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 135 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 136 #elif defined(CONFIG_QSPI_BOOT) 137 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 138 #define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 139 #define CONFIG_ENV_SPI_BUS 0 140 #define CONFIG_ENV_SPI_CS 0 141 #define CONFIG_ENV_SPI_MAX_HZ 1000000 142 #define CONFIG_ENV_SPI_MODE 0x03 143 #elif defined(CONFIG_NAND_BOOT) 144 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 145 #define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 146 #else 147 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 148 #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 149 #endif 150 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 151 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 152 #endif 153 154 /* Miscellaneous configurable options */ 155 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 156 157 #define CONFIG_HWCONFIG 158 #define HWCONFIG_BUFFER_SIZE 128 159 160 /* Initial environment variables */ 161 #define CONFIG_EXTRA_ENV_SETTINGS \ 162 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 163 "loadaddr=0x80100000\0" \ 164 "ramdisk_addr=0x800000\0" \ 165 "ramdisk_size=0x2000000\0" \ 166 "fdt_high=0xffffffffffffffff\0" \ 167 "initrd_high=0xffffffffffffffff\0" \ 168 "kernel_start=0x1000000\0" \ 169 "kernel_load=0xa0000000\0" \ 170 "kernel_size=0x2800000\0" \ 171 "console=ttyS0,115200\0" \ 172 MTDPARTS_DEFAULT "\0" 173 174 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 175 "earlycon=uart8250,mmio,0x21c0500 " \ 176 MTDPARTS_DEFAULT 177 /* Monitor Command Prompt */ 178 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 179 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 180 sizeof(CONFIG_SYS_PROMPT) + 16) 181 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 182 #define CONFIG_SYS_LONGHELP 183 #define CONFIG_CMDLINE_EDITING 1 184 #define CONFIG_AUTO_COMPLETE 185 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 186 187 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 188 189 /* Hash command with SHA acceleration supported in hardware */ 190 #ifdef CONFIG_FSL_CAAM 191 #define CONFIG_CMD_HASH 192 #define CONFIG_SHA_HW_ACCEL 193 #endif 194 195 #endif /* __LS1046A_COMMON_H */ 196