xref: /openbmc/u-boot/include/configs/ls1043aqds.h (revision 8f1a80e9)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1043AQDS_H__
8 #define __LS1043AQDS_H__
9 
10 #include "ls1043a_common.h"
11 
12 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
13 #define CONFIG_SYS_TEXT_BASE		0x82000000
14 #elif defined(CONFIG_QSPI_BOOT)
15 #define CONFIG_SYS_TEXT_BASE		0x40100000
16 #else
17 #define CONFIG_SYS_TEXT_BASE		0x60100000
18 #endif
19 
20 #ifndef __ASSEMBLY__
21 unsigned long get_board_sys_clk(void);
22 unsigned long get_board_ddr_clk(void);
23 #endif
24 
25 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
26 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
27 
28 #define CONFIG_SKIP_LOWLEVEL_INIT
29 
30 #define CONFIG_LAYERSCAPE_NS_ACCESS
31 
32 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
33 /* Physical Memory Map */
34 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
35 #define CONFIG_NR_DRAM_BANKS		2
36 
37 #define CONFIG_DDR_SPD
38 #define SPD_EEPROM_ADDRESS		0x51
39 #define CONFIG_SYS_SPD_BUS_NUM		0
40 
41 #ifndef CONFIG_SPL
42 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
43 #endif
44 
45 #define CONFIG_DDR_ECC
46 #ifdef CONFIG_DDR_ECC
47 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
48 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
49 #endif
50 
51 #ifdef CONFIG_SYS_DPAA_FMAN
52 #define CONFIG_FMAN_ENET
53 #define CONFIG_PHYLIB
54 #define CONFIG_PHY_VITESSE
55 #define CONFIG_PHY_REALTEK
56 #define CONFIG_PHYLIB_10G
57 #define RGMII_PHY1_ADDR		0x1
58 #define RGMII_PHY2_ADDR		0x2
59 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
60 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
61 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
62 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
63 /* PHY address on QSGMII riser card on slot 1 */
64 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
65 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
66 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
67 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
68 /* PHY address on QSGMII riser card on slot 2 */
69 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
70 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
71 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
72 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
73 #endif
74 
75 #ifdef CONFIG_RAMBOOT_PBL
76 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
77 #endif
78 
79 #ifdef CONFIG_NAND_BOOT
80 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
81 #endif
82 
83 #ifdef CONFIG_SD_BOOT
84 #ifdef CONFIG_SD_BOOT_QSPI
85 #define CONFIG_SYS_FSL_PBL_RCW \
86 	board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
87 #else
88 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
89 #endif
90 #endif
91 
92 /* LPUART */
93 #ifdef CONFIG_LPUART
94 #define CONFIG_LPUART_32B_REG
95 #endif
96 
97 /* SATA */
98 #define CONFIG_LIBATA
99 #define CONFIG_SCSI_AHCI
100 #define CONFIG_SCSI_AHCI_PLAT
101 
102 /* EEPROM */
103 #define CONFIG_ID_EEPROM
104 #define CONFIG_SYS_I2C_EEPROM_NXID
105 #define CONFIG_SYS_EEPROM_BUS_NUM		0
106 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
107 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
108 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
109 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
110 
111 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
112 
113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
114 #define CONFIG_SYS_SCSI_MAX_LUN			1
115 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
116 						CONFIG_SYS_SCSI_MAX_LUN)
117 
118 /*
119  * IFC Definitions
120  */
121 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
122 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
123 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
124 				CSPR_PORT_SIZE_16 | \
125 				CSPR_MSEL_NOR | \
126 				CSPR_V)
127 #define CONFIG_SYS_NOR1_CSPR_EXT	(0x0)
128 #define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
129 				+ 0x8000000) | \
130 				CSPR_PORT_SIZE_16 | \
131 				CSPR_MSEL_NOR | \
132 				CSPR_V)
133 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
134 
135 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
136 					CSOR_NOR_TRHZ_80)
137 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
138 					FTIM0_NOR_TEADC(0x5) | \
139 					FTIM0_NOR_TEAHC(0x5))
140 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
141 					FTIM1_NOR_TRAD_NOR(0x1a) | \
142 					FTIM1_NOR_TSEQRAD_NOR(0x13))
143 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
144 					FTIM2_NOR_TCH(0x4) | \
145 					FTIM2_NOR_TWPH(0xe) | \
146 					FTIM2_NOR_TWP(0x1c))
147 #define CONFIG_SYS_NOR_FTIM3		0
148 
149 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
150 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
151 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
152 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
153 
154 #define CONFIG_SYS_FLASH_EMPTY_INFO
155 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS, \
156 					CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
157 
158 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
159 #define CONFIG_SYS_WRITE_SWAPPED_DATA
160 
161 /*
162  * NAND Flash Definitions
163  */
164 #define CONFIG_NAND_FSL_IFC
165 
166 #define CONFIG_SYS_NAND_BASE		0x7e800000
167 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
168 
169 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
170 
171 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
172 				| CSPR_PORT_SIZE_8	\
173 				| CSPR_MSEL_NAND	\
174 				| CSPR_V)
175 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
176 #define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
177 				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
178 				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
179 				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
180 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
181 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
182 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
183 
184 #define CONFIG_SYS_NAND_ONFI_DETECTION
185 
186 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
187 					FTIM0_NAND_TWP(0x18)   | \
188 					FTIM0_NAND_TWCHT(0x7) | \
189 					FTIM0_NAND_TWH(0xa))
190 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
191 					FTIM1_NAND_TWBE(0x39)  | \
192 					FTIM1_NAND_TRR(0xe)   | \
193 					FTIM1_NAND_TRP(0x18))
194 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
195 					FTIM2_NAND_TREH(0xa) | \
196 					FTIM2_NAND_TWHRE(0x1e))
197 #define CONFIG_SYS_NAND_FTIM3           0x0
198 
199 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
200 #define CONFIG_SYS_MAX_NAND_DEVICE	1
201 #define CONFIG_MTD_NAND_VERIFY_WRITE
202 
203 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
204 #endif
205 
206 #ifdef CONFIG_NAND_BOOT
207 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
208 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
209 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
210 #endif
211 
212 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
213 #define CONFIG_QIXIS_I2C_ACCESS
214 #define CONFIG_SYS_I2C_EARLY_INIT
215 #endif
216 
217 /*
218  * QIXIS Definitions
219  */
220 #define CONFIG_FSL_QIXIS
221 
222 #ifdef CONFIG_FSL_QIXIS
223 #define QIXIS_BASE			0x7fb00000
224 #define QIXIS_BASE_PHYS			QIXIS_BASE
225 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
226 #define QIXIS_LBMAP_SWITCH		6
227 #define QIXIS_LBMAP_MASK		0x0f
228 #define QIXIS_LBMAP_SHIFT		0
229 #define QIXIS_LBMAP_DFLTBANK		0x00
230 #define QIXIS_LBMAP_ALTBANK		0x04
231 #define QIXIS_LBMAP_NAND		0x09
232 #define QIXIS_LBMAP_SD			0x00
233 #define QIXIS_LBMAP_SD_QSPI		0xff
234 #define QIXIS_LBMAP_QSPI		0xff
235 #define QIXIS_RCW_SRC_NAND		0x106
236 #define QIXIS_RCW_SRC_SD		0x040
237 #define QIXIS_RCW_SRC_QSPI		0x045
238 #define QIXIS_RST_CTL_RESET		0x41
239 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
240 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
241 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
242 
243 #define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
244 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
245 					CSPR_PORT_SIZE_8 | \
246 					CSPR_MSEL_GPCM | \
247 					CSPR_V)
248 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
249 #define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
250 					CSOR_NOR_NOR_MODE_AVD_NOR | \
251 					CSOR_NOR_TRHZ_80)
252 
253 /*
254  * QIXIS Timing parameters for IFC GPCM
255  */
256 #define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xc) | \
257 					FTIM0_GPCM_TEADC(0x20) | \
258 					FTIM0_GPCM_TEAHC(0x10))
259 #define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0x50) | \
260 					FTIM1_GPCM_TRAD(0x1f))
261 #define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0x8) | \
262 					FTIM2_GPCM_TCH(0x8) | \
263 					FTIM2_GPCM_TWP(0xf0))
264 #define CONFIG_SYS_FPGA_FTIM3		0x0
265 #endif
266 
267 #ifdef CONFIG_NAND_BOOT
268 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
269 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
270 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
271 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
272 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
273 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
274 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
275 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
276 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
277 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
278 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
279 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
280 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
281 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
282 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
283 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
284 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
285 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
286 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
287 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
288 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
289 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
290 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
291 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
292 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
293 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
294 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
295 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
296 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
297 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
298 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
299 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
300 #else
301 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
302 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
303 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
304 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
305 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
306 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
307 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
308 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
309 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
310 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
311 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
312 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
313 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
314 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
315 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
316 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
317 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
318 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
319 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
320 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
321 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
322 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
323 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
324 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
325 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
326 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
327 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
328 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
329 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
330 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
331 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
332 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
333 #endif
334 
335 /*
336  * I2C bus multiplexer
337  */
338 #define I2C_MUX_PCA_ADDR_PRI		0x77
339 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
340 #define I2C_RETIMER_ADDR		0x18
341 #define I2C_MUX_CH_DEFAULT		0x8
342 #define I2C_MUX_CH_CH7301		0xC
343 #define I2C_MUX_CH5			0xD
344 #define I2C_MUX_CH7			0xF
345 
346 #define I2C_MUX_CH_VOL_MONITOR 0xa
347 
348 /* Voltage monitor on channel 2*/
349 #define I2C_VOL_MONITOR_ADDR           0x40
350 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
351 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
352 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
353 
354 #define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
355 #ifndef CONFIG_SPL_BUILD
356 #define CONFIG_VID
357 #endif
358 #define CONFIG_VOL_MONITOR_IR36021_SET
359 #define CONFIG_VOL_MONITOR_INA220
360 /* The lowest and highest voltage allowed for LS1043AQDS */
361 #define VDD_MV_MIN			819
362 #define VDD_MV_MAX			1212
363 
364 /* QSPI device */
365 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
366 #define CONFIG_FSL_QSPI
367 #ifdef CONFIG_FSL_QSPI
368 #define CONFIG_SPI_FLASH_SPANSION
369 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
370 #define FSL_QSPI_FLASH_NUM		2
371 #endif
372 #endif
373 
374 /* USB */
375 #define CONFIG_HAS_FSL_XHCI_USB
376 #ifdef CONFIG_HAS_FSL_XHCI_USB
377 #define CONFIG_USB_XHCI_FSL
378 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
379 #endif
380 
381 /*
382  * Miscellaneous configurable options
383  */
384 #define CONFIG_MISC_INIT_R
385 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
386 #define CONFIG_AUTO_COMPLETE
387 #define CONFIG_SYS_PBSIZE		\
388 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
389 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
390 
391 #define CONFIG_SYS_MEMTEST_START	0x80000000
392 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
393 
394 #define CONFIG_SYS_HZ			1000
395 
396 #define CONFIG_SYS_INIT_SP_OFFSET \
397 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
398 
399 #ifdef CONFIG_SPL_BUILD
400 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
401 #else
402 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
403 #endif
404 
405 /*
406  * Environment
407  */
408 #define CONFIG_ENV_OVERWRITE
409 
410 #ifdef CONFIG_NAND_BOOT
411 #define CONFIG_ENV_SIZE			0x2000
412 #define CONFIG_ENV_OFFSET		(24 * CONFIG_SYS_NAND_BLOCK_SIZE)
413 #elif defined(CONFIG_SD_BOOT)
414 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
415 #define CONFIG_SYS_MMC_ENV_DEV		0
416 #define CONFIG_ENV_SIZE			0x2000
417 #elif defined(CONFIG_QSPI_BOOT)
418 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
419 #define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
420 #define CONFIG_ENV_SECT_SIZE		0x10000
421 #else
422 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
423 #define CONFIG_ENV_SECT_SIZE		0x20000
424 #define CONFIG_ENV_SIZE			0x20000
425 #endif
426 
427 #define CONFIG_CMDLINE_TAG
428 
429 #include <asm/fsl_secure_boot.h>
430 
431 #endif /* __LS1043AQDS_H__ */
432