xref: /openbmc/u-boot/include/configs/ls1043aqds.h (revision 730d2544)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1043AQDS_H__
8 #define __LS1043AQDS_H__
9 
10 #include "ls1043a_common.h"
11 
12 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
13 #define CONFIG_SYS_TEXT_BASE		0x82000000
14 #elif defined(CONFIG_QSPI_BOOT)
15 #define CONFIG_SYS_TEXT_BASE		0x40010000
16 #else
17 #define CONFIG_SYS_TEXT_BASE		0x60100000
18 #endif
19 
20 #ifndef __ASSEMBLY__
21 unsigned long get_board_sys_clk(void);
22 unsigned long get_board_ddr_clk(void);
23 #endif
24 
25 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
26 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
27 
28 #define CONFIG_SKIP_LOWLEVEL_INIT
29 
30 #define CONFIG_LAYERSCAPE_NS_ACCESS
31 
32 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
33 /* Physical Memory Map */
34 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
35 #define CONFIG_NR_DRAM_BANKS		2
36 
37 #define CONFIG_DDR_SPD
38 #define SPD_EEPROM_ADDRESS		0x51
39 #define CONFIG_SYS_SPD_BUS_NUM		0
40 
41 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
42 
43 #define CONFIG_DDR_ECC
44 #ifdef CONFIG_DDR_ECC
45 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
46 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
47 #endif
48 
49 #ifdef CONFIG_SYS_DPAA_FMAN
50 #define CONFIG_FMAN_ENET
51 #define CONFIG_PHYLIB
52 #define CONFIG_PHY_VITESSE
53 #define CONFIG_PHY_REALTEK
54 #define CONFIG_PHYLIB_10G
55 #define RGMII_PHY1_ADDR		0x1
56 #define RGMII_PHY2_ADDR		0x2
57 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
58 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
59 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
60 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
61 /* PHY address on QSGMII riser card on slot 1 */
62 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
63 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
64 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
65 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
66 /* PHY address on QSGMII riser card on slot 2 */
67 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
68 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
69 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
70 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
71 #endif
72 
73 #ifdef CONFIG_RAMBOOT_PBL
74 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
75 #endif
76 
77 #ifdef CONFIG_NAND_BOOT
78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
79 #endif
80 
81 #ifdef CONFIG_SD_BOOT
82 #ifdef CONFIG_SD_BOOT_QSPI
83 #define CONFIG_SYS_FSL_PBL_RCW \
84 	board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
85 #else
86 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
87 #endif
88 #endif
89 
90 /* LPUART */
91 #ifdef CONFIG_LPUART
92 #define CONFIG_LPUART_32B_REG
93 #endif
94 
95 /* SATA */
96 #define CONFIG_LIBATA
97 #define CONFIG_SCSI_AHCI
98 #define CONFIG_SCSI_AHCI_PLAT
99 #define CONFIG_SCSI
100 #define CONFIG_DOS_PARTITION
101 #define CONFIG_BOARD_LATE_INIT
102 
103 /* EEPROM */
104 #define CONFIG_ID_EEPROM
105 #define CONFIG_SYS_I2C_EEPROM_NXID
106 #define CONFIG_SYS_EEPROM_BUS_NUM		0
107 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
108 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
109 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
110 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
111 
112 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
113 
114 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
115 #define CONFIG_SYS_SCSI_MAX_LUN			1
116 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
117 						CONFIG_SYS_SCSI_MAX_LUN)
118 
119 /*
120  * IFC Definitions
121  */
122 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
123 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
124 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
125 				CSPR_PORT_SIZE_16 | \
126 				CSPR_MSEL_NOR | \
127 				CSPR_V)
128 #define CONFIG_SYS_NOR1_CSPR_EXT	(0x0)
129 #define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
130 				+ 0x8000000) | \
131 				CSPR_PORT_SIZE_16 | \
132 				CSPR_MSEL_NOR | \
133 				CSPR_V)
134 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
135 
136 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
137 					CSOR_NOR_TRHZ_80)
138 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
139 					FTIM0_NOR_TEADC(0x5) | \
140 					FTIM0_NOR_TEAHC(0x5))
141 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
142 					FTIM1_NOR_TRAD_NOR(0x1a) | \
143 					FTIM1_NOR_TSEQRAD_NOR(0x13))
144 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
145 					FTIM2_NOR_TCH(0x4) | \
146 					FTIM2_NOR_TWPH(0xe) | \
147 					FTIM2_NOR_TWP(0x1c))
148 #define CONFIG_SYS_NOR_FTIM3		0
149 
150 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
151 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
152 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
153 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
154 
155 #define CONFIG_SYS_FLASH_EMPTY_INFO
156 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS, \
157 					CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
158 
159 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
160 #define CONFIG_SYS_WRITE_SWAPPED_DATA
161 
162 /*
163  * NAND Flash Definitions
164  */
165 #define CONFIG_NAND_FSL_IFC
166 
167 #define CONFIG_SYS_NAND_BASE		0x7e800000
168 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
169 
170 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
171 
172 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
173 				| CSPR_PORT_SIZE_8	\
174 				| CSPR_MSEL_NAND	\
175 				| CSPR_V)
176 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
177 #define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
178 				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
179 				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
180 				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
181 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
182 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
183 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
184 
185 #define CONFIG_SYS_NAND_ONFI_DETECTION
186 
187 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
188 					FTIM0_NAND_TWP(0x18)   | \
189 					FTIM0_NAND_TWCHT(0x7) | \
190 					FTIM0_NAND_TWH(0xa))
191 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
192 					FTIM1_NAND_TWBE(0x39)  | \
193 					FTIM1_NAND_TRR(0xe)   | \
194 					FTIM1_NAND_TRP(0x18))
195 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
196 					FTIM2_NAND_TREH(0xa) | \
197 					FTIM2_NAND_TWHRE(0x1e))
198 #define CONFIG_SYS_NAND_FTIM3           0x0
199 
200 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
201 #define CONFIG_SYS_MAX_NAND_DEVICE	1
202 #define CONFIG_MTD_NAND_VERIFY_WRITE
203 #define CONFIG_CMD_NAND
204 
205 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
206 #endif
207 
208 #ifdef CONFIG_NAND_BOOT
209 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
210 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
211 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
212 #endif
213 
214 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
215 #define CONFIG_QIXIS_I2C_ACCESS
216 #define CONFIG_SYS_I2C_EARLY_INIT
217 #define CONFIG_SYS_NO_FLASH
218 #endif
219 
220 /*
221  * QIXIS Definitions
222  */
223 #define CONFIG_FSL_QIXIS
224 
225 #ifdef CONFIG_FSL_QIXIS
226 #define QIXIS_BASE			0x7fb00000
227 #define QIXIS_BASE_PHYS			QIXIS_BASE
228 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
229 #define QIXIS_LBMAP_SWITCH		6
230 #define QIXIS_LBMAP_MASK		0x0f
231 #define QIXIS_LBMAP_SHIFT		0
232 #define QIXIS_LBMAP_DFLTBANK		0x00
233 #define QIXIS_LBMAP_ALTBANK		0x04
234 #define QIXIS_LBMAP_NAND		0x09
235 #define QIXIS_LBMAP_SD			0x00
236 #define QIXIS_LBMAP_SD_QSPI		0xff
237 #define QIXIS_LBMAP_QSPI		0xff
238 #define QIXIS_RCW_SRC_NAND		0x106
239 #define QIXIS_RCW_SRC_SD		0x040
240 #define QIXIS_RCW_SRC_QSPI		0x045
241 #define QIXIS_RST_CTL_RESET		0x41
242 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
243 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
244 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
245 
246 #define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
247 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
248 					CSPR_PORT_SIZE_8 | \
249 					CSPR_MSEL_GPCM | \
250 					CSPR_V)
251 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
252 #define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
253 					CSOR_NOR_NOR_MODE_AVD_NOR | \
254 					CSOR_NOR_TRHZ_80)
255 
256 /*
257  * QIXIS Timing parameters for IFC GPCM
258  */
259 #define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xc) | \
260 					FTIM0_GPCM_TEADC(0x20) | \
261 					FTIM0_GPCM_TEAHC(0x10))
262 #define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0x50) | \
263 					FTIM1_GPCM_TRAD(0x1f))
264 #define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0x8) | \
265 					FTIM2_GPCM_TCH(0x8) | \
266 					FTIM2_GPCM_TWP(0xf0))
267 #define CONFIG_SYS_FPGA_FTIM3		0x0
268 #endif
269 
270 #ifdef CONFIG_NAND_BOOT
271 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
272 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
273 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
274 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
275 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
276 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
277 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
278 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
279 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
280 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
281 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
282 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
283 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
284 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
285 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
286 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
287 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
288 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
289 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
290 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
291 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
292 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
293 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
294 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
295 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
296 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
297 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
298 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
299 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
300 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
301 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
302 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
303 #else
304 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
305 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
306 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
307 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
308 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
309 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
310 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
311 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
312 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
313 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
314 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
315 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
316 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
317 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
318 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
319 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
320 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
321 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
322 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
323 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
324 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
325 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
326 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
327 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
328 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
329 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
330 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
331 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
332 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
333 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
334 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
335 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
336 #endif
337 
338 /*
339  * I2C bus multiplexer
340  */
341 #define I2C_MUX_PCA_ADDR_PRI		0x77
342 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
343 #define I2C_RETIMER_ADDR		0x18
344 #define I2C_MUX_CH_DEFAULT		0x8
345 #define I2C_MUX_CH_CH7301		0xC
346 #define I2C_MUX_CH5			0xD
347 #define I2C_MUX_CH7			0xF
348 
349 #define I2C_MUX_CH_VOL_MONITOR 0xa
350 
351 /* Voltage monitor on channel 2*/
352 #define I2C_VOL_MONITOR_ADDR           0x40
353 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
354 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
355 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
356 
357 #define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
358 #ifndef CONFIG_SPL_BUILD
359 #define CONFIG_VID
360 #endif
361 #define CONFIG_VOL_MONITOR_IR36021_SET
362 #define CONFIG_VOL_MONITOR_INA220
363 /* The lowest and highest voltage allowed for LS1043AQDS */
364 #define VDD_MV_MIN			819
365 #define VDD_MV_MAX			1212
366 
367 /* QSPI device */
368 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
369 #define CONFIG_FSL_QSPI
370 #ifdef CONFIG_FSL_QSPI
371 #define CONFIG_SPI_FLASH_SPANSION
372 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
373 #define FSL_QSPI_FLASH_NUM		2
374 #endif
375 #endif
376 
377 /* USB */
378 #define CONFIG_HAS_FSL_XHCI_USB
379 #ifdef CONFIG_HAS_FSL_XHCI_USB
380 #define CONFIG_USB_XHCI_FSL
381 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
382 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
383 #endif
384 
385 /*
386  * Miscellaneous configurable options
387  */
388 #define CONFIG_MISC_INIT_R
389 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
390 #define CONFIG_AUTO_COMPLETE
391 #define CONFIG_SYS_PBSIZE		\
392 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
393 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
394 
395 #define CONFIG_SYS_MEMTEST_START	0x80000000
396 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
397 
398 #define CONFIG_SYS_HZ			1000
399 
400 /*
401  * Stack sizes
402  * The stack sizes are set up in start.S using the settings below
403  */
404 #define CONFIG_STACKSIZE		(30 * 1024)
405 
406 #define CONFIG_SYS_INIT_SP_OFFSET \
407 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
408 
409 #ifdef CONFIG_SPL_BUILD
410 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
411 #else
412 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
413 #endif
414 
415 /*
416  * Environment
417  */
418 #define CONFIG_ENV_OVERWRITE
419 
420 #ifdef CONFIG_NAND_BOOT
421 #define CONFIG_ENV_IS_IN_NAND
422 #define CONFIG_ENV_SIZE			0x2000
423 #define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
424 #elif defined(CONFIG_SD_BOOT)
425 #define CONFIG_ENV_OFFSET		(1024 * 1024)
426 #define CONFIG_ENV_IS_IN_MMC
427 #define CONFIG_SYS_MMC_ENV_DEV		0
428 #define CONFIG_ENV_SIZE			0x2000
429 #elif defined(CONFIG_QSPI_BOOT)
430 #define CONFIG_ENV_IS_IN_SPI_FLASH
431 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
432 #define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
433 #define CONFIG_ENV_SECT_SIZE		0x10000
434 #else
435 #define CONFIG_ENV_IS_IN_FLASH
436 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
437 #define CONFIG_ENV_SECT_SIZE		0x20000
438 #define CONFIG_ENV_SIZE			0x20000
439 #endif
440 
441 #define CONFIG_CMDLINE_TAG
442 
443 #include <asm/fsl_secure_boot.h>
444 
445 #endif /* __LS1043AQDS_H__ */
446