xref: /openbmc/u-boot/include/configs/ls1043aqds.h (revision 23ff8633)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1043AQDS_H__
8 #define __LS1043AQDS_H__
9 
10 #include "ls1043a_common.h"
11 
12 #define CONFIG_DISPLAY_CPUINFO
13 #define CONFIG_DISPLAY_BOARDINFO
14 
15 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
16 #define CONFIG_SYS_TEXT_BASE		0x82000000
17 #else
18 #define CONFIG_SYS_TEXT_BASE		0x60100000
19 #endif
20 
21 #ifndef __ASSEMBLY__
22 unsigned long get_board_sys_clk(void);
23 unsigned long get_board_ddr_clk(void);
24 #endif
25 
26 #define CONFIG_SYS_CLK_FREQ		100000000
27 #define CONFIG_DDR_CLK_FREQ		100000000
28 
29 #define CONFIG_SKIP_LOWLEVEL_INIT
30 
31 #define CONFIG_LAYERSCAPE_NS_ACCESS
32 
33 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
34 /* Physical Memory Map */
35 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
36 #define CONFIG_NR_DRAM_BANKS		1
37 
38 #define CONFIG_DDR_SPD
39 #define SPD_EEPROM_ADDRESS		0x51
40 #define CONFIG_SYS_SPD_BUS_NUM		0
41 
42 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
43 #ifndef CONFIG_SYS_FSL_DDR4
44 #define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
45 #endif
46 
47 #define CONFIG_DDR_ECC
48 #ifdef CONFIG_DDR_ECC
49 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
50 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
51 #endif
52 
53 #define CONFIG_SYS_HAS_SERDES
54 
55 #ifdef CONFIG_SYS_DPAA_FMAN
56 #define CONFIG_FMAN_ENET
57 #define CONFIG_PHYLIB
58 #define CONFIG_PHY_VITESSE
59 #define CONFIG_PHY_REALTEK
60 #define CONFIG_PHYLIB_10G
61 #define RGMII_PHY1_ADDR		0x1
62 #define RGMII_PHY2_ADDR		0x2
63 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
64 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
65 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
66 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
67 /* PHY address on QSGMII riser card on slot 1 */
68 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
69 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
70 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
71 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
72 /* PHY address on QSGMII riser card on slot 2 */
73 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
74 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
75 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
76 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
77 #endif
78 
79 #ifdef CONFIG_RAMBOOT_PBL
80 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
81 #endif
82 
83 #ifdef CONFIG_NAND_BOOT
84 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
85 #endif
86 
87 #ifdef CONFIG_SD_BOOT
88 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
89 #endif
90 
91 /* SATA */
92 #define CONFIG_LIBATA
93 #define CONFIG_SCSI_AHCI
94 #define CONFIG_SCSI_AHCI_PLAT
95 #define CONFIG_CMD_SCSI
96 #define CONFIG_CMD_FAT
97 #define CONFIG_CMD_EXT2
98 #define CONFIG_DOS_PARTITION
99 #define CONFIG_BOARD_LATE_INIT
100 
101 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
102 
103 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
104 #define CONFIG_SYS_SCSI_MAX_LUN			1
105 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
106 						CONFIG_SYS_SCSI_MAX_LUN)
107 
108 /*
109  * IFC Definitions
110  */
111 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
112 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
113 				CSPR_PORT_SIZE_16 | \
114 				CSPR_MSEL_NOR | \
115 				CSPR_V)
116 #define CONFIG_SYS_NOR1_CSPR_EXT	(0x0)
117 #define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
118 				+ 0x8000000) | \
119 				CSPR_PORT_SIZE_16 | \
120 				CSPR_MSEL_NOR | \
121 				CSPR_V)
122 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
123 
124 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
125 					CSOR_NOR_TRHZ_80)
126 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
127 					FTIM0_NOR_TEADC(0x5) | \
128 					FTIM0_NOR_TEAHC(0x5))
129 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
130 					FTIM1_NOR_TRAD_NOR(0x1a) | \
131 					FTIM1_NOR_TSEQRAD_NOR(0x13))
132 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
133 					FTIM2_NOR_TCH(0x4) | \
134 					FTIM2_NOR_TWPH(0xe) | \
135 					FTIM2_NOR_TWP(0x1c))
136 #define CONFIG_SYS_NOR_FTIM3		0
137 
138 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
139 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
140 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
141 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
142 
143 #define CONFIG_SYS_FLASH_EMPTY_INFO
144 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS, \
145 					CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
146 
147 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
148 #define CONFIG_SYS_WRITE_SWAPPED_DATA
149 
150 /*
151  * NAND Flash Definitions
152  */
153 #define CONFIG_NAND_FSL_IFC
154 
155 #define CONFIG_SYS_NAND_BASE		0x7e800000
156 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
157 
158 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
159 
160 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
161 				| CSPR_PORT_SIZE_8	\
162 				| CSPR_MSEL_NAND	\
163 				| CSPR_V)
164 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
165 #define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
166 				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
167 				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
168 				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
169 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
170 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
171 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
172 
173 #define CONFIG_SYS_NAND_ONFI_DETECTION
174 
175 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
176 					FTIM0_NAND_TWP(0x18)   | \
177 					FTIM0_NAND_TWCHT(0x7) | \
178 					FTIM0_NAND_TWH(0xa))
179 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
180 					FTIM1_NAND_TWBE(0x39)  | \
181 					FTIM1_NAND_TRR(0xe)   | \
182 					FTIM1_NAND_TRP(0x18))
183 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
184 					FTIM2_NAND_TREH(0xa) | \
185 					FTIM2_NAND_TWHRE(0x1e))
186 #define CONFIG_SYS_NAND_FTIM3           0x0
187 
188 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
189 #define CONFIG_SYS_MAX_NAND_DEVICE	1
190 #define CONFIG_MTD_NAND_VERIFY_WRITE
191 #define CONFIG_CMD_NAND
192 
193 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
194 
195 #ifdef CONFIG_NAND_BOOT
196 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
197 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
198 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
199 #endif
200 
201 /*
202  * QIXIS Definitions
203  */
204 #define CONFIG_FSL_QIXIS
205 
206 #ifdef CONFIG_FSL_QIXIS
207 #define QIXIS_BASE			0x7fb00000
208 #define QIXIS_BASE_PHYS			QIXIS_BASE
209 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
210 #define QIXIS_LBMAP_SWITCH		6
211 #define QIXIS_LBMAP_MASK		0x0f
212 #define QIXIS_LBMAP_SHIFT		0
213 #define QIXIS_LBMAP_DFLTBANK		0x00
214 #define QIXIS_LBMAP_ALTBANK		0x04
215 #define QIXIS_RST_CTL_RESET		0x44
216 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
217 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
218 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
219 
220 #define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
221 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
222 					CSPR_PORT_SIZE_8 | \
223 					CSPR_MSEL_GPCM | \
224 					CSPR_V)
225 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
226 #define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
227 					CSOR_NOR_NOR_MODE_AVD_NOR | \
228 					CSOR_NOR_TRHZ_80)
229 
230 /*
231  * QIXIS Timing parameters for IFC GPCM
232  */
233 #define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xc) | \
234 					FTIM0_GPCM_TEADC(0x20) | \
235 					FTIM0_GPCM_TEAHC(0x10))
236 #define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0x50) | \
237 					FTIM1_GPCM_TRAD(0x1f))
238 #define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0x8) | \
239 					FTIM2_GPCM_TCH(0x8) | \
240 					FTIM2_GPCM_TWP(0xf0))
241 #define CONFIG_SYS_FPGA_FTIM3		0x0
242 #endif
243 
244 #ifdef CONFIG_NAND_BOOT
245 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
246 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
247 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
248 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
249 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
250 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
251 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
252 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
253 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
254 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
255 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
256 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
257 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
258 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
259 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
260 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
261 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
262 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
263 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
264 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
265 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
266 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
267 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
268 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
269 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
270 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
271 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
272 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
273 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
274 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
275 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
276 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
277 #else
278 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
279 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
280 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
281 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
282 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
283 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
284 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
285 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
286 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
287 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
288 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
289 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
290 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
291 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
292 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
293 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
294 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
295 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
296 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
297 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
298 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
299 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
300 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
301 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
302 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
303 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
304 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
305 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
306 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
307 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
308 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
309 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
310 #endif
311 
312 /*
313  * I2C bus multiplexer
314  */
315 #define I2C_MUX_PCA_ADDR_PRI		0x77
316 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
317 #define I2C_RETIMER_ADDR		0x18
318 #define I2C_MUX_CH_DEFAULT		0x8
319 #define I2C_MUX_CH_CH7301		0xC
320 #define I2C_MUX_CH5			0xD
321 #define I2C_MUX_CH7			0xF
322 
323 #define I2C_MUX_CH_VOL_MONITOR 0xa
324 
325 /* Voltage monitor on channel 2*/
326 #define I2C_VOL_MONITOR_ADDR           0x40
327 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
328 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
329 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
330 
331 #define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
332 #ifndef CONFIG_SPL_BUILD
333 #define CONFIG_VID
334 #endif
335 #define CONFIG_VOL_MONITOR_IR36021_SET
336 #define CONFIG_VOL_MONITOR_INA220
337 /* The lowest and highest voltage allowed for LS1043AQDS */
338 #define VDD_MV_MIN			819
339 #define VDD_MV_MAX			1212
340 
341 /*
342  * Miscellaneous configurable options
343  */
344 #define CONFIG_MISC_INIT_R
345 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
346 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
347 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
348 #define CONFIG_SYS_PROMPT		"=> "
349 #define CONFIG_AUTO_COMPLETE
350 #define CONFIG_SYS_PBSIZE		\
351 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
352 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
353 
354 #define CONFIG_CMD_GREPENV
355 #define CONFIG_CMD_MEMINFO
356 #define CONFIG_CMD_MEMTEST
357 #define CONFIG_SYS_MEMTEST_START	0x80000000
358 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
359 
360 #define CONFIG_SYS_HZ			1000
361 
362 /*
363  * Stack sizes
364  * The stack sizes are set up in start.S using the settings below
365  */
366 #define CONFIG_STACKSIZE		(30 * 1024)
367 
368 #define CONFIG_SYS_INIT_SP_OFFSET \
369 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
370 
371 #ifdef CONFIG_SPL_BUILD
372 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
373 #else
374 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
375 #endif
376 
377 /*
378  * Environment
379  */
380 #define CONFIG_ENV_OVERWRITE
381 
382 #ifdef CONFIG_NAND_BOOT
383 #define CONFIG_ENV_IS_IN_NAND
384 #define CONFIG_ENV_SIZE			0x2000
385 #define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
386 #elif defined(CONFIG_SD_BOOT)
387 #define CONFIG_ENV_OFFSET		(1024 * 1024)
388 #define CONFIG_ENV_IS_IN_MMC
389 #define CONFIG_SYS_MMC_ENV_DEV		0
390 #define CONFIG_ENV_SIZE			0x2000
391 #else
392 #define CONFIG_ENV_IS_IN_FLASH
393 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
394 #define CONFIG_ENV_SECT_SIZE		0x20000
395 #define CONFIG_ENV_SIZE			0x20000
396 #endif
397 
398 #define CONFIG_OF_LIBFDT
399 #define CONFIG_OF_BOARD_SETUP
400 #define CONFIG_CMD_BOOTZ
401 #define CONFIG_CMD_MII
402 #define CONFIG_CMDLINE_TAG
403 
404 #endif /* __LS1043AQDS_H__ */
405