xref: /openbmc/u-boot/include/configs/ls1043aqds.h (revision 1b245d9a)
1 /*
2  * Copyright 2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1043AQDS_H__
8 #define __LS1043AQDS_H__
9 
10 #include "ls1043a_common.h"
11 
12 #define CONFIG_DISPLAY_CPUINFO
13 #ifdef CONFIG_QSPI_BOOT
14 #define CONFIG_DISPLAY_BOARDINFO_LATE
15 #else
16 #define CONFIG_DISPLAY_BOARDINFO
17 #endif
18 
19 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
20 #define CONFIG_SYS_TEXT_BASE		0x82000000
21 #elif defined(CONFIG_QSPI_BOOT)
22 #define CONFIG_SYS_TEXT_BASE		0x40010000
23 #else
24 #define CONFIG_SYS_TEXT_BASE		0x60100000
25 #endif
26 
27 #ifndef __ASSEMBLY__
28 unsigned long get_board_sys_clk(void);
29 unsigned long get_board_ddr_clk(void);
30 #endif
31 
32 #define CONFIG_SYS_CLK_FREQ		100000000
33 #define CONFIG_DDR_CLK_FREQ		100000000
34 
35 #define CONFIG_SKIP_LOWLEVEL_INIT
36 
37 #define CONFIG_LAYERSCAPE_NS_ACCESS
38 
39 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
40 /* Physical Memory Map */
41 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
42 #define CONFIG_NR_DRAM_BANKS		2
43 
44 #define CONFIG_DDR_SPD
45 #define SPD_EEPROM_ADDRESS		0x51
46 #define CONFIG_SYS_SPD_BUS_NUM		0
47 
48 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
49 #ifndef CONFIG_SYS_FSL_DDR4
50 #define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
51 #endif
52 
53 #define CONFIG_DDR_ECC
54 #ifdef CONFIG_DDR_ECC
55 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
57 #endif
58 
59 #define CONFIG_SYS_HAS_SERDES
60 
61 #ifdef CONFIG_SYS_DPAA_FMAN
62 #define CONFIG_FMAN_ENET
63 #define CONFIG_PHYLIB
64 #define CONFIG_PHY_VITESSE
65 #define CONFIG_PHY_REALTEK
66 #define CONFIG_PHYLIB_10G
67 #define RGMII_PHY1_ADDR		0x1
68 #define RGMII_PHY2_ADDR		0x2
69 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
70 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
71 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
72 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
73 /* PHY address on QSGMII riser card on slot 1 */
74 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
75 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
76 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
77 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
78 /* PHY address on QSGMII riser card on slot 2 */
79 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
80 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
81 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
82 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
83 #endif
84 
85 #ifdef CONFIG_RAMBOOT_PBL
86 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
87 #endif
88 
89 #ifdef CONFIG_NAND_BOOT
90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
91 #endif
92 
93 #ifdef CONFIG_SD_BOOT
94 #ifdef CONFIG_SD_BOOT_QSPI
95 #define CONFIG_SYS_FSL_PBL_RCW \
96 	board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
97 #else
98 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
99 #endif
100 #endif
101 
102 /* LPUART */
103 #ifdef CONFIG_LPUART
104 #define CONFIG_LPUART_32B_REG
105 #endif
106 
107 /* SATA */
108 #define CONFIG_LIBATA
109 #define CONFIG_SCSI_AHCI
110 #define CONFIG_SCSI_AHCI_PLAT
111 #define CONFIG_CMD_SCSI
112 #define CONFIG_CMD_FAT
113 #define CONFIG_CMD_EXT2
114 #define CONFIG_DOS_PARTITION
115 #define CONFIG_BOARD_LATE_INIT
116 
117 
118 /* EEPROM */
119 #define CONFIG_ID_EEPROM
120 #define CONFIG_SYS_I2C_EEPROM_NXID
121 #define CONFIG_SYS_EEPROM_BUS_NUM		0
122 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
123 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
124 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
125 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
126 
127 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
128 
129 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
130 #define CONFIG_SYS_SCSI_MAX_LUN			1
131 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
132 						CONFIG_SYS_SCSI_MAX_LUN)
133 
134 /*
135  * IFC Definitions
136  */
137 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
138 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
139 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
140 				CSPR_PORT_SIZE_16 | \
141 				CSPR_MSEL_NOR | \
142 				CSPR_V)
143 #define CONFIG_SYS_NOR1_CSPR_EXT	(0x0)
144 #define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
145 				+ 0x8000000) | \
146 				CSPR_PORT_SIZE_16 | \
147 				CSPR_MSEL_NOR | \
148 				CSPR_V)
149 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
150 
151 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
152 					CSOR_NOR_TRHZ_80)
153 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
154 					FTIM0_NOR_TEADC(0x5) | \
155 					FTIM0_NOR_TEAHC(0x5))
156 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
157 					FTIM1_NOR_TRAD_NOR(0x1a) | \
158 					FTIM1_NOR_TSEQRAD_NOR(0x13))
159 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
160 					FTIM2_NOR_TCH(0x4) | \
161 					FTIM2_NOR_TWPH(0xe) | \
162 					FTIM2_NOR_TWP(0x1c))
163 #define CONFIG_SYS_NOR_FTIM3		0
164 
165 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
166 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
167 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
168 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
169 
170 #define CONFIG_SYS_FLASH_EMPTY_INFO
171 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS, \
172 					CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
173 
174 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
175 #define CONFIG_SYS_WRITE_SWAPPED_DATA
176 
177 /*
178  * NAND Flash Definitions
179  */
180 #define CONFIG_NAND_FSL_IFC
181 
182 #define CONFIG_SYS_NAND_BASE		0x7e800000
183 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
184 
185 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
186 
187 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
188 				| CSPR_PORT_SIZE_8	\
189 				| CSPR_MSEL_NAND	\
190 				| CSPR_V)
191 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
192 #define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
193 				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
194 				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
195 				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
196 				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
197 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
198 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
199 
200 #define CONFIG_SYS_NAND_ONFI_DETECTION
201 
202 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
203 					FTIM0_NAND_TWP(0x18)   | \
204 					FTIM0_NAND_TWCHT(0x7) | \
205 					FTIM0_NAND_TWH(0xa))
206 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
207 					FTIM1_NAND_TWBE(0x39)  | \
208 					FTIM1_NAND_TRR(0xe)   | \
209 					FTIM1_NAND_TRP(0x18))
210 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
211 					FTIM2_NAND_TREH(0xa) | \
212 					FTIM2_NAND_TWHRE(0x1e))
213 #define CONFIG_SYS_NAND_FTIM3           0x0
214 
215 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
216 #define CONFIG_SYS_MAX_NAND_DEVICE	1
217 #define CONFIG_MTD_NAND_VERIFY_WRITE
218 #define CONFIG_CMD_NAND
219 
220 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
221 #endif
222 
223 #ifdef CONFIG_NAND_BOOT
224 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
225 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
226 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
227 #endif
228 
229 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
230 #define CONFIG_QIXIS_I2C_ACCESS
231 #define CONFIG_SYS_NO_FLASH
232 #undef CONFIG_CMD_IMLS
233 #endif
234 
235 /*
236  * QIXIS Definitions
237  */
238 #define CONFIG_FSL_QIXIS
239 
240 #ifdef CONFIG_FSL_QIXIS
241 #define QIXIS_BASE			0x7fb00000
242 #define QIXIS_BASE_PHYS			QIXIS_BASE
243 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
244 #define QIXIS_LBMAP_SWITCH		6
245 #define QIXIS_LBMAP_MASK		0x0f
246 #define QIXIS_LBMAP_SHIFT		0
247 #define QIXIS_LBMAP_DFLTBANK		0x00
248 #define QIXIS_LBMAP_ALTBANK		0x04
249 #define QIXIS_LBMAP_NAND		0x09
250 #define QIXIS_LBMAP_SD			0x00
251 #define QIXIS_LBMAP_SD_QSPI		0xff
252 #define QIXIS_LBMAP_QSPI		0xff
253 #define QIXIS_RCW_SRC_NAND		0x106
254 #define QIXIS_RCW_SRC_SD		0x040
255 #define QIXIS_RCW_SRC_QSPI		0x045
256 #define QIXIS_RST_CTL_RESET		0x41
257 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
258 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
259 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
260 
261 #define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
262 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
263 					CSPR_PORT_SIZE_8 | \
264 					CSPR_MSEL_GPCM | \
265 					CSPR_V)
266 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
267 #define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
268 					CSOR_NOR_NOR_MODE_AVD_NOR | \
269 					CSOR_NOR_TRHZ_80)
270 
271 /*
272  * QIXIS Timing parameters for IFC GPCM
273  */
274 #define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xc) | \
275 					FTIM0_GPCM_TEADC(0x20) | \
276 					FTIM0_GPCM_TEAHC(0x10))
277 #define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0x50) | \
278 					FTIM1_GPCM_TRAD(0x1f))
279 #define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0x8) | \
280 					FTIM2_GPCM_TCH(0x8) | \
281 					FTIM2_GPCM_TWP(0xf0))
282 #define CONFIG_SYS_FPGA_FTIM3		0x0
283 #endif
284 
285 #ifdef CONFIG_NAND_BOOT
286 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
287 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
288 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
289 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
290 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
291 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
292 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
293 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
294 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
295 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
296 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
297 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
298 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
299 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
300 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
301 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
302 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
303 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
304 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
305 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
306 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
307 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
308 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
309 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
310 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
311 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
312 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
313 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
314 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
315 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
316 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
317 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
318 #else
319 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
320 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
321 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
322 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
323 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
324 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
325 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
326 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
327 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
328 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
329 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
330 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
331 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
332 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
333 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
334 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
335 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
336 #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
337 #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
338 #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
339 #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
340 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
341 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
342 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
343 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
344 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
345 #define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
346 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
347 #define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
348 #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
349 #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
350 #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
351 #endif
352 
353 /*
354  * I2C bus multiplexer
355  */
356 #define I2C_MUX_PCA_ADDR_PRI		0x77
357 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
358 #define I2C_RETIMER_ADDR		0x18
359 #define I2C_MUX_CH_DEFAULT		0x8
360 #define I2C_MUX_CH_CH7301		0xC
361 #define I2C_MUX_CH5			0xD
362 #define I2C_MUX_CH7			0xF
363 
364 #define I2C_MUX_CH_VOL_MONITOR 0xa
365 
366 /* Voltage monitor on channel 2*/
367 #define I2C_VOL_MONITOR_ADDR           0x40
368 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
369 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
370 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
371 
372 #define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
373 #ifndef CONFIG_SPL_BUILD
374 #define CONFIG_VID
375 #endif
376 #define CONFIG_VOL_MONITOR_IR36021_SET
377 #define CONFIG_VOL_MONITOR_INA220
378 /* The lowest and highest voltage allowed for LS1043AQDS */
379 #define VDD_MV_MIN			819
380 #define VDD_MV_MAX			1212
381 
382 /* QSPI device */
383 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
384 #define CONFIG_FSL_QSPI
385 #ifdef CONFIG_FSL_QSPI
386 #define CONFIG_SPI_FLASH_SPANSION
387 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
388 #define FSL_QSPI_FLASH_NUM		2
389 #endif
390 #endif
391 
392 /* USB */
393 #define CONFIG_HAS_FSL_XHCI_USB
394 #ifdef CONFIG_HAS_FSL_XHCI_USB
395 #define CONFIG_USB_XHCI
396 #define CONFIG_USB_XHCI_FSL
397 #define CONFIG_USB_XHCI_DWC3
398 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
399 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
400 #define CONFIG_CMD_USB
401 #define CONFIG_USB_STORAGE
402 #define CONFIG_CMD_EXT2
403 #endif
404 
405 /*
406  * Miscellaneous configurable options
407  */
408 #define CONFIG_MISC_INIT_R
409 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
410 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
411 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
412 #define CONFIG_SYS_PROMPT		"=> "
413 #define CONFIG_AUTO_COMPLETE
414 #define CONFIG_SYS_PBSIZE		\
415 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
416 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
417 
418 #define CONFIG_CMD_GREPENV
419 #define CONFIG_CMD_MEMINFO
420 #define CONFIG_CMD_MEMTEST
421 #define CONFIG_SYS_MEMTEST_START	0x80000000
422 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
423 
424 #define CONFIG_SYS_HZ			1000
425 
426 /*
427  * Stack sizes
428  * The stack sizes are set up in start.S using the settings below
429  */
430 #define CONFIG_STACKSIZE		(30 * 1024)
431 
432 #define CONFIG_SYS_INIT_SP_OFFSET \
433 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
434 
435 #ifdef CONFIG_SPL_BUILD
436 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
437 #else
438 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
439 #endif
440 
441 /*
442  * Environment
443  */
444 #define CONFIG_ENV_OVERWRITE
445 
446 #ifdef CONFIG_NAND_BOOT
447 #define CONFIG_ENV_IS_IN_NAND
448 #define CONFIG_ENV_SIZE			0x2000
449 #define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
450 #elif defined(CONFIG_SD_BOOT)
451 #define CONFIG_ENV_OFFSET		(1024 * 1024)
452 #define CONFIG_ENV_IS_IN_MMC
453 #define CONFIG_SYS_MMC_ENV_DEV		0
454 #define CONFIG_ENV_SIZE			0x2000
455 #elif defined(CONFIG_QSPI_BOOT)
456 #define CONFIG_ENV_IS_IN_SPI_FLASH
457 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
458 #define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
459 #define CONFIG_ENV_SECT_SIZE		0x10000
460 #else
461 #define CONFIG_ENV_IS_IN_FLASH
462 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
463 #define CONFIG_ENV_SECT_SIZE		0x20000
464 #define CONFIG_ENV_SIZE			0x20000
465 #endif
466 
467 #define CONFIG_CMD_BOOTZ
468 #define CONFIG_CMD_MII
469 #define CONFIG_CMDLINE_TAG
470 
471 #include <asm/fsl_secure_boot.h>
472 
473 #endif /* __LS1043AQDS_H__ */
474