1 /* 2 * Copyright 2015 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1043AQDS_H__ 8 #define __LS1043AQDS_H__ 9 10 #include "ls1043a_common.h" 11 12 #define CONFIG_DISPLAY_CPUINFO 13 #define CONFIG_DISPLAY_BOARDINFO 14 15 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) 16 #define CONFIG_SYS_TEXT_BASE 0x82000000 17 #else 18 #define CONFIG_SYS_TEXT_BASE 0x60100000 19 #endif 20 21 #ifndef __ASSEMBLY__ 22 unsigned long get_board_sys_clk(void); 23 unsigned long get_board_ddr_clk(void); 24 #endif 25 26 #define CONFIG_SYS_CLK_FREQ 100000000 27 #define CONFIG_DDR_CLK_FREQ 100000000 28 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 31 #define CONFIG_LAYERSCAPE_NS_ACCESS 32 33 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 34 /* Physical Memory Map */ 35 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 36 #define CONFIG_NR_DRAM_BANKS 2 37 38 #define CONFIG_DDR_SPD 39 #define SPD_EEPROM_ADDRESS 0x51 40 #define CONFIG_SYS_SPD_BUS_NUM 0 41 42 #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ 43 #ifndef CONFIG_SYS_FSL_DDR4 44 #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ 45 #endif 46 47 #define CONFIG_DDR_ECC 48 #ifdef CONFIG_DDR_ECC 49 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 50 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 51 #endif 52 53 #define CONFIG_SYS_HAS_SERDES 54 55 #ifdef CONFIG_SYS_DPAA_FMAN 56 #define CONFIG_FMAN_ENET 57 #define CONFIG_PHYLIB 58 #define CONFIG_PHY_VITESSE 59 #define CONFIG_PHY_REALTEK 60 #define CONFIG_PHYLIB_10G 61 #define RGMII_PHY1_ADDR 0x1 62 #define RGMII_PHY2_ADDR 0x2 63 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 64 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 65 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 66 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 67 /* PHY address on QSGMII riser card on slot 1 */ 68 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4 69 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5 70 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6 71 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7 72 /* PHY address on QSGMII riser card on slot 2 */ 73 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8 74 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9 75 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA 76 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB 77 #endif 78 79 #ifdef CONFIG_RAMBOOT_PBL 80 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg 81 #endif 82 83 #ifdef CONFIG_NAND_BOOT 84 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg 85 #endif 86 87 #ifdef CONFIG_SD_BOOT 88 #ifdef CONFIG_SD_BOOT_QSPI 89 #define CONFIG_SYS_FSL_PBL_RCW \ 90 board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg 91 #else 92 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg 93 #endif 94 #endif 95 96 /* LPUART */ 97 #ifdef CONFIG_LPUART 98 #define CONFIG_LPUART_32B_REG 99 #endif 100 101 /* SATA */ 102 #define CONFIG_LIBATA 103 #define CONFIG_SCSI_AHCI 104 #define CONFIG_SCSI_AHCI_PLAT 105 #define CONFIG_CMD_SCSI 106 #define CONFIG_CMD_FAT 107 #define CONFIG_CMD_EXT2 108 #define CONFIG_DOS_PARTITION 109 #define CONFIG_BOARD_LATE_INIT 110 111 #define CONFIG_SYS_SATA AHCI_BASE_ADDR 112 113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 114 #define CONFIG_SYS_SCSI_MAX_LUN 1 115 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 116 CONFIG_SYS_SCSI_MAX_LUN) 117 118 /* 119 * IFC Definitions 120 */ 121 #ifndef CONFIG_SD_BOOT_QSPI 122 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 123 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 124 CSPR_PORT_SIZE_16 | \ 125 CSPR_MSEL_NOR | \ 126 CSPR_V) 127 #define CONFIG_SYS_NOR1_CSPR_EXT (0x0) 128 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 129 + 0x8000000) | \ 130 CSPR_PORT_SIZE_16 | \ 131 CSPR_MSEL_NOR | \ 132 CSPR_V) 133 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 134 135 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 136 CSOR_NOR_TRHZ_80) 137 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 138 FTIM0_NOR_TEADC(0x5) | \ 139 FTIM0_NOR_TEAHC(0x5)) 140 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 141 FTIM1_NOR_TRAD_NOR(0x1a) | \ 142 FTIM1_NOR_TSEQRAD_NOR(0x13)) 143 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 144 FTIM2_NOR_TCH(0x4) | \ 145 FTIM2_NOR_TWPH(0xe) | \ 146 FTIM2_NOR_TWP(0x1c)) 147 #define CONFIG_SYS_NOR_FTIM3 0 148 149 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 150 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 151 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 152 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 153 154 #define CONFIG_SYS_FLASH_EMPTY_INFO 155 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ 156 CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} 157 158 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 159 #define CONFIG_SYS_WRITE_SWAPPED_DATA 160 161 /* 162 * NAND Flash Definitions 163 */ 164 #define CONFIG_NAND_FSL_IFC 165 166 #define CONFIG_SYS_NAND_BASE 0x7e800000 167 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 168 169 #define CONFIG_SYS_NAND_CSPR_EXT (0x0) 170 171 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 172 | CSPR_PORT_SIZE_8 \ 173 | CSPR_MSEL_NAND \ 174 | CSPR_V) 175 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 176 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 177 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 178 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 179 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 180 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 181 | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ 182 | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ 183 184 #define CONFIG_SYS_NAND_ONFI_DETECTION 185 186 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ 187 FTIM0_NAND_TWP(0x18) | \ 188 FTIM0_NAND_TWCHT(0x7) | \ 189 FTIM0_NAND_TWH(0xa)) 190 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 191 FTIM1_NAND_TWBE(0x39) | \ 192 FTIM1_NAND_TRR(0xe) | \ 193 FTIM1_NAND_TRP(0x18)) 194 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ 195 FTIM2_NAND_TREH(0xa) | \ 196 FTIM2_NAND_TWHRE(0x1e)) 197 #define CONFIG_SYS_NAND_FTIM3 0x0 198 199 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 200 #define CONFIG_SYS_MAX_NAND_DEVICE 1 201 #define CONFIG_MTD_NAND_VERIFY_WRITE 202 #define CONFIG_CMD_NAND 203 204 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 205 #endif 206 207 #ifdef CONFIG_NAND_BOOT 208 #define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ 209 #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO 210 #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) 211 #endif 212 213 #ifdef CONFIG_SD_BOOT_QSPI 214 #define CONFIG_QIXIS_I2C_ACCESS 215 #define CONFIG_SYS_NO_FLASH 216 #undef CONFIG_CMD_IMLS 217 #endif 218 219 /* 220 * QIXIS Definitions 221 */ 222 #define CONFIG_FSL_QIXIS 223 224 #ifdef CONFIG_FSL_QIXIS 225 #define QIXIS_BASE 0x7fb00000 226 #define QIXIS_BASE_PHYS QIXIS_BASE 227 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 228 #define QIXIS_LBMAP_SWITCH 6 229 #define QIXIS_LBMAP_MASK 0x0f 230 #define QIXIS_LBMAP_SHIFT 0 231 #define QIXIS_LBMAP_DFLTBANK 0x00 232 #define QIXIS_LBMAP_ALTBANK 0x04 233 #define QIXIS_LBMAP_NAND 0x09 234 #define QIXIS_LBMAP_SD 0x00 235 #define QIXIS_LBMAP_SD_QSPI 0xff 236 #define QIXIS_RCW_SRC_NAND 0x106 237 #define QIXIS_RCW_SRC_SD 0x040 238 #define QIXIS_RST_CTL_RESET 0x41 239 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 240 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 241 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 242 243 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 244 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ 245 CSPR_PORT_SIZE_8 | \ 246 CSPR_MSEL_GPCM | \ 247 CSPR_V) 248 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 249 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 250 CSOR_NOR_NOR_MODE_AVD_NOR | \ 251 CSOR_NOR_TRHZ_80) 252 253 /* 254 * QIXIS Timing parameters for IFC GPCM 255 */ 256 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ 257 FTIM0_GPCM_TEADC(0x20) | \ 258 FTIM0_GPCM_TEAHC(0x10)) 259 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ 260 FTIM1_GPCM_TRAD(0x1f)) 261 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ 262 FTIM2_GPCM_TCH(0x8) | \ 263 FTIM2_GPCM_TWP(0xf0)) 264 #define CONFIG_SYS_FPGA_FTIM3 0x0 265 #endif 266 267 #ifdef CONFIG_NAND_BOOT 268 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 269 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 270 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 271 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 272 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 273 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 274 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 275 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 276 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 277 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 278 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 279 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 280 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 281 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 282 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 283 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 284 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 285 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 286 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 287 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 288 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 289 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 290 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 291 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 292 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT 293 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR 294 #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK 295 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR 296 #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 297 #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 298 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 299 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 300 #else 301 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 302 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 303 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 304 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 305 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 306 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 307 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 308 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 309 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 310 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 311 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 312 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 313 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 314 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 315 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 316 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 317 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 318 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 319 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 320 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 321 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 322 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 323 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 324 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 325 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT 326 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR 327 #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK 328 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR 329 #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 330 #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 331 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 332 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 333 #endif 334 335 /* 336 * I2C bus multiplexer 337 */ 338 #define I2C_MUX_PCA_ADDR_PRI 0x77 339 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 340 #define I2C_RETIMER_ADDR 0x18 341 #define I2C_MUX_CH_DEFAULT 0x8 342 #define I2C_MUX_CH_CH7301 0xC 343 #define I2C_MUX_CH5 0xD 344 #define I2C_MUX_CH7 0xF 345 346 #define I2C_MUX_CH_VOL_MONITOR 0xa 347 348 /* Voltage monitor on channel 2*/ 349 #define I2C_VOL_MONITOR_ADDR 0x40 350 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 351 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 352 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 353 354 #define CONFIG_VID_FLS_ENV "ls1043aqds_vdd_mv" 355 #ifndef CONFIG_SPL_BUILD 356 #define CONFIG_VID 357 #endif 358 #define CONFIG_VOL_MONITOR_IR36021_SET 359 #define CONFIG_VOL_MONITOR_INA220 360 /* The lowest and highest voltage allowed for LS1043AQDS */ 361 #define VDD_MV_MIN 819 362 #define VDD_MV_MAX 1212 363 364 /* QSPI device */ 365 #ifdef CONFIG_SD_BOOT_QSPI 366 #define CONFIG_FSL_QSPI 367 #ifdef CONFIG_FSL_QSPI 368 #define CONFIG_SPI_FLASH_SPANSION 369 #define FSL_QSPI_FLASH_SIZE (1 << 24) 370 #define FSL_QSPI_FLASH_NUM 2 371 #endif 372 #endif 373 374 /* 375 * Miscellaneous configurable options 376 */ 377 #define CONFIG_MISC_INIT_R 378 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 379 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 380 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 381 #define CONFIG_SYS_PROMPT "=> " 382 #define CONFIG_AUTO_COMPLETE 383 #define CONFIG_SYS_PBSIZE \ 384 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 385 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 386 387 #define CONFIG_CMD_GREPENV 388 #define CONFIG_CMD_MEMINFO 389 #define CONFIG_CMD_MEMTEST 390 #define CONFIG_SYS_MEMTEST_START 0x80000000 391 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 392 393 #define CONFIG_SYS_HZ 1000 394 395 /* 396 * Stack sizes 397 * The stack sizes are set up in start.S using the settings below 398 */ 399 #define CONFIG_STACKSIZE (30 * 1024) 400 401 #define CONFIG_SYS_INIT_SP_OFFSET \ 402 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 403 404 #ifdef CONFIG_SPL_BUILD 405 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 406 #else 407 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 408 #endif 409 410 /* 411 * Environment 412 */ 413 #define CONFIG_ENV_OVERWRITE 414 415 #ifdef CONFIG_NAND_BOOT 416 #define CONFIG_ENV_IS_IN_NAND 417 #define CONFIG_ENV_SIZE 0x2000 418 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 419 #elif defined(CONFIG_SD_BOOT) 420 #define CONFIG_ENV_OFFSET (1024 * 1024) 421 #define CONFIG_ENV_IS_IN_MMC 422 #define CONFIG_SYS_MMC_ENV_DEV 0 423 #define CONFIG_ENV_SIZE 0x2000 424 #else 425 #define CONFIG_ENV_IS_IN_FLASH 426 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) 427 #define CONFIG_ENV_SECT_SIZE 0x20000 428 #define CONFIG_ENV_SIZE 0x20000 429 #endif 430 431 #define CONFIG_OF_LIBFDT 432 #define CONFIG_OF_BOARD_SETUP 433 #define CONFIG_CMD_BOOTZ 434 #define CONFIG_CMD_MII 435 #define CONFIG_CMDLINE_TAG 436 437 #include <asm/fsl_secure_boot.h> 438 439 #endif /* __LS1043AQDS_H__ */ 440