1 /*
2  * Copyright (C) 2015 Freescale Semiconductor
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1043A_COMMON_H
8 #define __LS1043A_COMMON_H
9 
10 #define CONFIG_REMAKE_ELF
11 #define CONFIG_FSL_LAYERSCAPE
12 #define CONFIG_LS1043A
13 #define CONFIG_MP
14 #define CONFIG_GICV2
15 
16 #include <asm/arch/config.h>
17 
18 /* Link Definitions */
19 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
20 
21 #define CONFIG_SUPPORT_RAW_INITRD
22 
23 #define CONFIG_SKIP_LOWLEVEL_INIT
24 
25 #define CONFIG_VERY_BIG_RAM
26 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
28 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
29 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
30 
31 #define CPU_RELEASE_ADDR               secondary_boot_func
32 
33 /* Generic Timer Definitions */
34 #define COUNTER_FREQUENCY		25000000	/* 25MHz */
35 
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
38 
39 /* Serial Port */
40 #define CONFIG_CONS_INDEX		1
41 #define CONFIG_SYS_NS16550_SERIAL
42 #define CONFIG_SYS_NS16550_REG_SIZE	1
43 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
44 
45 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
46 
47 /* SD boot SPL */
48 #ifdef CONFIG_SD_BOOT
49 #define CONFIG_SPL_FRAMEWORK
50 #define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
51 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
52 
53 #define CONFIG_SPL_TEXT_BASE		0x10000000
54 #define CONFIG_SPL_MAX_SIZE		0x1d000
55 #define CONFIG_SPL_STACK		0x1001e000
56 #define CONFIG_SPL_PAD_TO		0x1d000
57 
58 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
59 					CONFIG_SYS_MONITOR_LEN)
60 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
61 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
62 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
63 #define CONFIG_SYS_MONITOR_LEN		0xa0000
64 #endif
65 
66 /* NAND SPL */
67 #ifdef CONFIG_NAND_BOOT
68 #define CONFIG_SPL_PBL_PAD
69 #define CONFIG_SPL_FRAMEWORK
70 #define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
71 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
72 #define CONFIG_SPL_TEXT_BASE		0x10000000
73 #define CONFIG_SPL_MAX_SIZE		0x1a000
74 #define CONFIG_SPL_STACK		0x1001d000
75 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
76 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
77 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
78 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
79 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
80 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
81 #define CONFIG_SYS_MONITOR_LEN		0xa0000
82 #endif
83 
84 /* IFC */
85 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
86 #define CONFIG_FSL_IFC
87 /*
88  * CONFIG_SYS_FLASH_BASE has the final address (core view)
89  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
90  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
91  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
92  */
93 #define CONFIG_SYS_FLASH_BASE			0x60000000
94 #define CONFIG_SYS_FLASH_BASE_PHYS		CONFIG_SYS_FLASH_BASE
95 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY	0x00000000
96 
97 #ifdef CONFIG_MTD_NOR_FLASH
98 #define CONFIG_FLASH_CFI_DRIVER
99 #define CONFIG_SYS_FLASH_CFI
100 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
101 #define CONFIG_SYS_FLASH_QUIET_TEST
102 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
103 #endif
104 #endif
105 
106 /* I2C */
107 #define CONFIG_SYS_I2C
108 #define CONFIG_SYS_I2C_MXC
109 #define CONFIG_SYS_I2C_MXC_I2C1
110 #define CONFIG_SYS_I2C_MXC_I2C2
111 #define CONFIG_SYS_I2C_MXC_I2C3
112 #define CONFIG_SYS_I2C_MXC_I2C4
113 
114 /* PCIe */
115 #define CONFIG_PCIE1		/* PCIE controller 1 */
116 #define CONFIG_PCIE2		/* PCIE controller 2 */
117 #define CONFIG_PCIE3		/* PCIE controller 3 */
118 
119 #ifdef CONFIG_PCI
120 #define CONFIG_NET_MULTI
121 #define CONFIG_PCI_SCAN_SHOW
122 #define CONFIG_CMD_PCI
123 #endif
124 
125 /* Command line configuration */
126 #define CONFIG_CMD_ENV
127 
128 /*  MMC  */
129 #ifdef CONFIG_MMC
130 #define CONFIG_FSL_ESDHC
131 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
132 #endif
133 
134 /*  DSPI  */
135 #define CONFIG_FSL_DSPI
136 #ifdef CONFIG_FSL_DSPI
137 #define CONFIG_DM_SPI_FLASH
138 #define CONFIG_SPI_FLASH_STMICRO	/* cs0 */
139 #define CONFIG_SPI_FLASH_SST		/* cs1 */
140 #define CONFIG_SPI_FLASH_EON		/* cs2 */
141 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
142 #define CONFIG_SF_DEFAULT_BUS		1
143 #define CONFIG_SF_DEFAULT_CS		0
144 #endif
145 #endif
146 
147 /* FMan ucode */
148 #define CONFIG_SYS_DPAA_FMAN
149 #ifdef CONFIG_SYS_DPAA_FMAN
150 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
151 
152 #ifdef CONFIG_NAND_BOOT
153 /* Store Fman ucode at offeset 0x160000(11 blocks). */
154 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
155 #define CONFIG_SYS_FMAN_FW_ADDR		(11 * CONFIG_SYS_NAND_BLOCK_SIZE)
156 #elif defined(CONFIG_SD_BOOT)
157 /*
158  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
159  * about 1MB (2040 blocks), Env is stored after the image, and the env size is
160  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820).
161  */
162 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
163 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
164 #elif defined(CONFIG_QSPI_BOOT)
165 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
166 #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
167 #define CONFIG_ENV_SPI_BUS		0
168 #define CONFIG_ENV_SPI_CS		0
169 #define CONFIG_ENV_SPI_MAX_HZ		1000000
170 #define CONFIG_ENV_SPI_MODE		0x03
171 #else
172 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
173 /* FMan fireware Pre-load address */
174 #define CONFIG_SYS_FMAN_FW_ADDR		0x60300000
175 #endif
176 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
177 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
178 #endif
179 
180 /* Miscellaneous configurable options */
181 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
182 
183 #define CONFIG_HWCONFIG
184 #define HWCONFIG_BUFFER_SIZE		128
185 
186 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
187 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
188 			"5m(kernel),1m(dtb),9m(file_system)"
189 #else
190 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
191 			"1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
192 			"1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
193 			"1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
194 			"1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
195 			"40m(nor_bank4_fit);7e800000.flash:" \
196 			"1m(nand_uboot),1m(nand_uboot_env)," \
197 			"20m(nand_fit);spi0.0:1m(uboot)," \
198 			"5m(kernel),1m(dtb),9m(file_system)"
199 #endif
200 
201 /* Initial environment variables */
202 #define CONFIG_EXTRA_ENV_SETTINGS		\
203 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
204 	"loadaddr=0x80100000\0"			\
205 	"fdt_high=0xffffffffffffffff\0"		\
206 	"initrd_high=0xffffffffffffffff\0"	\
207 	"kernel_start=0x61100000\0"		\
208 	"kernel_load=0xa0000000\0"		\
209 	"kernel_size=0x2800000\0"		\
210 	"console=ttyS0,115200\0"                \
211 	"mtdparts=" MTDPARTS_DEFAULT "\0"
212 
213 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
214 					"earlycon=uart8250,mmio,0x21c0500 "    \
215 					MTDPARTS_DEFAULT
216 
217 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
218 #define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
219 					"e0000 f00000 && bootm $kernel_load"
220 #else
221 #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
222 					"$kernel_size && bootm $kernel_load"
223 #endif
224 
225 /* Monitor Command Prompt */
226 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
227 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
228 					sizeof(CONFIG_SYS_PROMPT) + 16)
229 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
230 #define CONFIG_SYS_LONGHELP
231 #define CONFIG_CMDLINE_EDITING		1
232 #define CONFIG_AUTO_COMPLETE
233 #define CONFIG_SYS_MAXARGS		64	/* max command args */
234 
235 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
236 
237 /* Hash command with SHA acceleration supported in hardware */
238 #ifdef CONFIG_FSL_CAAM
239 #define CONFIG_CMD_HASH
240 #define CONFIG_SHA_HW_ACCEL
241 #endif
242 
243 #endif /* __LS1043A_COMMON_H */
244