1 /* 2 * Copyright (C) 2015 Freescale Semiconductor 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1043A_COMMON_H 8 #define __LS1043A_COMMON_H 9 10 #define CONFIG_REMAKE_ELF 11 #define CONFIG_FSL_LAYERSCAPE 12 #define CONFIG_FSL_LSCH2 13 #define CONFIG_LS1043A 14 #define CONFIG_MP 15 #define CONFIG_SYS_FSL_CLK 16 #define CONFIG_GICV2 17 18 #include <asm/arch/config.h> 19 #ifdef CONFIG_SYS_FSL_SRDS_1 20 #define CONFIG_SYS_HAS_SERDES 21 #endif 22 23 /* Link Definitions */ 24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 25 26 #define CONFIG_SUPPORT_RAW_INITRD 27 28 #define CONFIG_SKIP_LOWLEVEL_INIT 29 #define CONFIG_BOARD_EARLY_INIT_F 1 30 31 /* Flat Device Tree Definitions */ 32 #define CONFIG_OF_LIBFDT 33 #define CONFIG_OF_BOARD_SETUP 34 35 /* new uImage format support */ 36 #define CONFIG_FIT 37 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 38 39 #ifndef CONFIG_SYS_FSL_DDR4 40 #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ 41 #endif 42 43 #define CONFIG_VERY_BIG_RAM 44 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 45 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 46 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 47 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 48 49 #define CPU_RELEASE_ADDR secondary_boot_func 50 51 /* Generic Timer Definitions */ 52 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 53 54 /* Size of malloc() pool */ 55 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 56 57 /* Serial Port */ 58 #define CONFIG_CONS_INDEX 1 59 #define CONFIG_SYS_NS16550_SERIAL 60 #define CONFIG_SYS_NS16550_REG_SIZE 1 61 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) 62 63 #define CONFIG_BAUDRATE 115200 64 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 65 66 /* SD boot SPL */ 67 #ifdef CONFIG_SD_BOOT 68 #define CONFIG_SPL_FRAMEWORK 69 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 70 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 71 #define CONFIG_SPL_LIBCOMMON_SUPPORT 72 #define CONFIG_SPL_LIBGENERIC_SUPPORT 73 #define CONFIG_SPL_ENV_SUPPORT 74 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 75 #define CONFIG_SPL_WATCHDOG_SUPPORT 76 #define CONFIG_SPL_I2C_SUPPORT 77 #define CONFIG_SPL_SERIAL_SUPPORT 78 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 79 #define CONFIG_SPL_MMC_SUPPORT 80 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 81 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 82 83 #define CONFIG_SPL_TEXT_BASE 0x10000000 84 #define CONFIG_SPL_MAX_SIZE 0x1d000 85 #define CONFIG_SPL_STACK 0x1001e000 86 #define CONFIG_SPL_PAD_TO 0x1d000 87 88 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 89 CONFIG_SYS_MONITOR_LEN) 90 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 91 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 92 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 93 #define CONFIG_SYS_MONITOR_LEN 0xa0000 94 #endif 95 96 /* NAND SPL */ 97 #ifdef CONFIG_NAND_BOOT 98 #define CONFIG_SPL_PBL_PAD 99 #define CONFIG_SPL_FRAMEWORK 100 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" 101 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 102 #define CONFIG_SPL_LIBCOMMON_SUPPORT 103 #define CONFIG_SPL_LIBGENERIC_SUPPORT 104 #define CONFIG_SPL_ENV_SUPPORT 105 #define CONFIG_SPL_WATCHDOG_SUPPORT 106 #define CONFIG_SPL_I2C_SUPPORT 107 #define CONFIG_SPL_SERIAL_SUPPORT 108 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 109 #define CONFIG_SPL_NAND_SUPPORT 110 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 111 #define CONFIG_SPL_TEXT_BASE 0x10000000 112 #define CONFIG_SPL_MAX_SIZE 0x1a000 113 #define CONFIG_SPL_STACK 0x1001d000 114 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 115 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 116 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 117 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 118 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 119 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 120 #define CONFIG_SYS_MONITOR_LEN 0xa0000 121 #endif 122 123 /* IFC */ 124 #define CONFIG_FSL_IFC 125 /* 126 * CONFIG_SYS_FLASH_BASE has the final address (core view) 127 * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) 128 * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address 129 * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting 130 */ 131 #define CONFIG_SYS_FLASH_BASE 0x60000000 132 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 133 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 134 135 #ifndef CONFIG_SYS_NO_FLASH 136 #define CONFIG_FLASH_CFI_DRIVER 137 #define CONFIG_SYS_FLASH_CFI 138 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 139 #define CONFIG_SYS_FLASH_QUIET_TEST 140 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 141 #endif 142 143 /* I2C */ 144 #define CONFIG_CMD_I2C 145 #define CONFIG_SYS_I2C 146 #define CONFIG_SYS_I2C_MXC 147 #define CONFIG_SYS_I2C_MXC_I2C1 148 #define CONFIG_SYS_I2C_MXC_I2C2 149 #define CONFIG_SYS_I2C_MXC_I2C3 150 #define CONFIG_SYS_I2C_MXC_I2C4 151 152 /* PCIe */ 153 #define CONFIG_PCI /* Enable PCI/PCIE */ 154 #define CONFIG_PCIE1 /* PCIE controller 1 */ 155 #define CONFIG_PCIE2 /* PCIE controller 2 */ 156 #define CONFIG_PCIE3 /* PCIE controller 3 */ 157 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ 158 #define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" 159 160 #define CONFIG_SYS_PCI_64BIT 161 162 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 163 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ 164 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 165 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ 166 167 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000 168 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 169 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ 170 171 #define CONFIG_SYS_PCIE_MEM_BUS 0x40000000 172 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x40000000 173 #define CONFIG_SYS_PCIE_MEM_SIZE 0x40000000 /* 1G */ 174 175 #ifdef CONFIG_PCI 176 #define CONFIG_NET_MULTI 177 #define CONFIG_PCI_PNP 178 #define CONFIG_E1000 179 #define CONFIG_PCI_SCAN_SHOW 180 #define CONFIG_CMD_PCI 181 #endif 182 183 /* Command line configuration */ 184 #define CONFIG_CMD_CACHE 185 #define CONFIG_CMD_DHCP 186 #define CONFIG_CMD_ENV 187 #define CONFIG_CMD_PING 188 189 /* MMC */ 190 #define CONFIG_MMC 191 #ifdef CONFIG_MMC 192 #define CONFIG_CMD_MMC 193 #define CONFIG_CMD_FAT 194 #define CONFIG_FSL_ESDHC 195 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 196 #define CONFIG_GENERIC_MMC 197 #define CONFIG_DOS_PARTITION 198 #endif 199 200 /* FMan ucode */ 201 #define CONFIG_SYS_DPAA_FMAN 202 #ifdef CONFIG_SYS_DPAA_FMAN 203 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 204 205 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 206 /* FMan fireware Pre-load address */ 207 #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 208 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 209 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 210 #endif 211 212 /* Miscellaneous configurable options */ 213 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 214 #define CONFIG_ARCH_EARLY_INIT_R 215 #define CONFIG_BOARD_LATE_INIT 216 217 #define CONFIG_HWCONFIG 218 #define HWCONFIG_BUFFER_SIZE 128 219 220 /* Initial environment variables */ 221 #define CONFIG_EXTRA_ENV_SETTINGS \ 222 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 223 "loadaddr=0x80100000\0" \ 224 "kernel_addr=0x100000\0" \ 225 "ramdisk_addr=0x800000\0" \ 226 "ramdisk_size=0x2000000\0" \ 227 "fdt_high=0xffffffffffffffff\0" \ 228 "initrd_high=0xffffffffffffffff\0" \ 229 "kernel_start=0x61200000\0" \ 230 "kernel_load=0x807f0000\0" \ 231 "kernel_size=0x1000000\0" \ 232 "console=ttyAMA0,38400n8\0" 233 234 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ 235 "earlycon=uart8250,0x21c0500,115200" 236 #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ 237 "$kernel_size && bootm $kernel_load" 238 #define CONFIG_BOOTDELAY 10 239 240 /* Monitor Command Prompt */ 241 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 242 #define CONFIG_SYS_PROMPT "=> " 243 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 244 sizeof(CONFIG_SYS_PROMPT) + 16) 245 #define CONFIG_SYS_HUSH_PARSER 246 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 247 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ 248 #define CONFIG_SYS_LONGHELP 249 #define CONFIG_CMDLINE_EDITING 1 250 #define CONFIG_AUTO_COMPLETE 251 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 252 253 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 254 255 #endif /* __LS1043A_COMMON_H */ 256