xref: /openbmc/u-boot/include/configs/ls1021atwr.h (revision a91ef4ad)
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #include <config_cmd_default.h>
11 
12 #define CONFIG_LS102XA
13 
14 #define CONFIG_SYS_GENERIC_BOARD
15 
16 #define CONFIG_DISPLAY_CPUINFO
17 #define CONFIG_DISPLAY_BOARDINFO
18 
19 #define CONFIG_SKIP_LOWLEVEL_INIT
20 #define CONFIG_BOARD_EARLY_INIT_F
21 
22 /*
23  * Size of malloc() pool
24  */
25 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
26 
27 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
28 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
29 
30 /*
31  * Generic Timer Definitions
32  */
33 #define GENERIC_TIMER_CLK		12500000
34 
35 #define CONFIG_SYS_CLK_FREQ		100000000
36 #define CONFIG_DDR_CLK_FREQ		100000000
37 
38 #ifdef CONFIG_RAMBOOT_PBL
39 #define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
40 #endif
41 
42 #ifdef CONFIG_SD_BOOT
43 #define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
44 #define CONFIG_SPL_FRAMEWORK
45 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
46 #define CONFIG_SPL_LIBCOMMON_SUPPORT
47 #define CONFIG_SPL_LIBGENERIC_SUPPORT
48 #define CONFIG_SPL_ENV_SUPPORT
49 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
50 #define CONFIG_SPL_I2C_SUPPORT
51 #define CONFIG_SPL_WATCHDOG_SUPPORT
52 #define CONFIG_SPL_SERIAL_SUPPORT
53 #define CONFIG_SPL_MMC_SUPPORT
54 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
55 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
56 
57 #define CONFIG_SPL_TEXT_BASE		0x10000000
58 #define CONFIG_SPL_MAX_SIZE		0x1a000
59 #define CONFIG_SPL_STACK		0x1001d000
60 #define CONFIG_SPL_PAD_TO		0x1c000
61 #define CONFIG_SYS_TEXT_BASE		0x82000000
62 
63 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
64 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
65 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
66 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
67 #define CONFIG_SYS_MONITOR_LEN		0x80000
68 #endif
69 
70 #ifdef CONFIG_QSPI_BOOT
71 #define CONFIG_SYS_TEXT_BASE		0x40010000
72 #define CONFIG_SYS_NO_FLASH
73 #endif
74 
75 #ifndef CONFIG_SYS_TEXT_BASE
76 #define CONFIG_SYS_TEXT_BASE		0x67f80000
77 #endif
78 
79 #define CONFIG_NR_DRAM_BANKS		1
80 #define PHYS_SDRAM			0x80000000
81 #define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)
82 
83 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
84 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
85 
86 #define CONFIG_SYS_HAS_SERDES
87 
88 #define CONFIG_FSL_CAAM			/* Enable CAAM */
89 
90 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
91 	!defined(CONFIG_QSPI_BOOT)
92 #define CONFIG_U_QE
93 #endif
94 
95 /*
96  * IFC Definitions
97  */
98 #ifndef CONFIG_QSPI_BOOT
99 #define CONFIG_FSL_IFC
100 #define CONFIG_SYS_FLASH_BASE		0x60000000
101 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
102 
103 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
104 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
105 				CSPR_PORT_SIZE_16 | \
106 				CSPR_MSEL_NOR | \
107 				CSPR_V)
108 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
109 
110 /* NOR Flash Timing Params */
111 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
112 					CSOR_NOR_TRHZ_80)
113 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
114 					FTIM0_NOR_TEADC(0x5) | \
115 					FTIM0_NOR_TAVDS(0x0) | \
116 					FTIM0_NOR_TEAHC(0x5))
117 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
118 					FTIM1_NOR_TRAD_NOR(0x1A) | \
119 					FTIM1_NOR_TSEQRAD_NOR(0x13))
120 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
121 					FTIM2_NOR_TCH(0x4) | \
122 					FTIM2_NOR_TWP(0x1c) | \
123 					FTIM2_NOR_TWPH(0x0e))
124 #define CONFIG_SYS_NOR_FTIM3		0
125 
126 #define CONFIG_FLASH_CFI_DRIVER
127 #define CONFIG_SYS_FLASH_CFI
128 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
129 #define CONFIG_SYS_FLASH_QUIET_TEST
130 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
131 
132 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
133 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
134 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
135 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
136 
137 #define CONFIG_SYS_FLASH_EMPTY_INFO
138 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
139 
140 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
141 #define CONFIG_SYS_WRITE_SWAPPED_DATA
142 #endif
143 
144 /* CPLD */
145 
146 #define CONFIG_SYS_CPLD_BASE	0x7fb00000
147 #define CPLD_BASE_PHYS		CONFIG_SYS_CPLD_BASE
148 
149 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
150 #define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
151 					CSPR_PORT_SIZE_8 | \
152 					CSPR_MSEL_GPCM | \
153 					CSPR_V)
154 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
155 #define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
156 					CSOR_NOR_NOR_MODE_AVD_NOR | \
157 					CSOR_NOR_TRHZ_80)
158 
159 /* CPLD Timing parameters for IFC GPCM */
160 #define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xf) | \
161 					FTIM0_GPCM_TEADC(0xf) | \
162 					FTIM0_GPCM_TEAHC(0xf))
163 #define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
164 					FTIM1_GPCM_TRAD(0x3f))
165 #define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
166 					FTIM2_GPCM_TCH(0xf) | \
167 					FTIM2_GPCM_TWP(0xff))
168 #define CONFIG_SYS_FPGA_FTIM3           0x0
169 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
170 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
171 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
172 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
173 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
174 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
175 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
176 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
177 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_FPGA_CSPR_EXT
178 #define CONFIG_SYS_CSPR1		CONFIG_SYS_FPGA_CSPR
179 #define CONFIG_SYS_AMASK1		CONFIG_SYS_FPGA_AMASK
180 #define CONFIG_SYS_CSOR1		CONFIG_SYS_FPGA_CSOR
181 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_FPGA_FTIM0
182 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_FPGA_FTIM1
183 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_FPGA_FTIM2
184 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_FPGA_FTIM3
185 
186 /*
187  * Serial Port
188  */
189 #define CONFIG_CONS_INDEX		1
190 #define CONFIG_SYS_NS16550
191 #define CONFIG_SYS_NS16550_SERIAL
192 #define CONFIG_SYS_NS16550_REG_SIZE	1
193 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
194 
195 #define CONFIG_BAUDRATE			115200
196 
197 /*
198  * I2C
199  */
200 #define CONFIG_CMD_I2C
201 #define CONFIG_SYS_I2C
202 #define CONFIG_SYS_I2C_MXC
203 
204 /* EEPROM */
205 #ifndef CONFIG_SD_BOOT
206 #define CONFIG_ID_EEPROM
207 #define CONFIG_SYS_I2C_EEPROM_NXID
208 #define CONFIG_SYS_EEPROM_BUS_NUM		1
209 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
210 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
211 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
212 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
213 #endif
214 
215 /*
216  * MMC
217  */
218 #define CONFIG_MMC
219 #define CONFIG_CMD_MMC
220 #define CONFIG_FSL_ESDHC
221 #define CONFIG_GENERIC_MMC
222 
223 #define CONFIG_CMD_FAT
224 #define CONFIG_DOS_PARTITION
225 
226 /* QSPI */
227 #ifdef CONFIG_QSPI_BOOT
228 #define CONFIG_FSL_QSPI
229 #define QSPI0_AMBA_BASE			0x40000000
230 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
231 #define FSL_QSPI_FLASH_NUM		2
232 
233 #define CONFIG_CMD_SF
234 #define CONFIG_SPI_FLASH
235 #define CONFIG_SPI_FLASH_STMICRO
236 #endif
237 
238 /*
239  * Video
240  */
241 #define CONFIG_FSL_DCU_FB
242 
243 #ifdef CONFIG_FSL_DCU_FB
244 #define CONFIG_VIDEO
245 #define CONFIG_CMD_BMP
246 #define CONFIG_CFB_CONSOLE
247 #define CONFIG_VGA_AS_SINGLE_DEVICE
248 #define CONFIG_VIDEO_LOGO
249 #define CONFIG_VIDEO_BMP_LOGO
250 
251 #define CONFIG_FSL_DCU_SII9022A
252 #define CONFIG_SYS_I2C_DVI_BUS_NUM	1
253 #define CONFIG_SYS_I2C_DVI_ADDR		0x39
254 #endif
255 
256 /*
257  * eTSEC
258  */
259 #define CONFIG_TSEC_ENET
260 
261 #ifdef CONFIG_TSEC_ENET
262 #define CONFIG_MII
263 #define CONFIG_MII_DEFAULT_TSEC		1
264 #define CONFIG_TSEC1			1
265 #define CONFIG_TSEC1_NAME		"eTSEC1"
266 #define CONFIG_TSEC2			1
267 #define CONFIG_TSEC2_NAME		"eTSEC2"
268 #define CONFIG_TSEC3			1
269 #define CONFIG_TSEC3_NAME		"eTSEC3"
270 
271 #define TSEC1_PHY_ADDR			2
272 #define TSEC2_PHY_ADDR			0
273 #define TSEC3_PHY_ADDR			1
274 
275 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
276 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
277 #define TSEC3_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
278 
279 #define TSEC1_PHYIDX			0
280 #define TSEC2_PHYIDX			0
281 #define TSEC3_PHYIDX			0
282 
283 #define CONFIG_ETHPRIME			"eTSEC1"
284 
285 #define CONFIG_PHY_GIGE
286 #define CONFIG_PHYLIB
287 #define CONFIG_PHY_ATHEROS
288 
289 #define CONFIG_HAS_ETH0
290 #define CONFIG_HAS_ETH1
291 #define CONFIG_HAS_ETH2
292 #endif
293 
294 /* PCIe */
295 #define CONFIG_PCI		/* Enable PCI/PCIE */
296 #define CONFIG_PCIE1		/* PCIE controler 1 */
297 #define CONFIG_PCIE2		/* PCIE controler 2 */
298 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
299 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
300 
301 #define CONFIG_CMD_PING
302 #define CONFIG_CMD_DHCP
303 #define CONFIG_CMD_MII
304 #define CONFIG_CMD_NET
305 
306 #define CONFIG_CMDLINE_TAG
307 #define CONFIG_CMDLINE_EDITING
308 
309 #ifdef CONFIG_QSPI_BOOT
310 #undef CONFIG_CMD_IMLS
311 #else
312 #define CONFIG_CMD_IMLS
313 #endif
314 
315 #define CONFIG_ARMV7_NONSEC
316 #define CONFIG_ARMV7_VIRT
317 #define CONFIG_PEN_ADDR_BIG_ENDIAN
318 #define CONFIG_LS102XA_NS_ACCESS
319 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
320 #define CONFIG_TIMER_CLK_FREQ		12500000
321 #define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
322 
323 #define CONFIG_HWCONFIG
324 #define HWCONFIG_BUFFER_SIZE		128
325 
326 #define CONFIG_BOOTDELAY		3
327 
328 #define CONFIG_EXTRA_ENV_SETTINGS	\
329 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
330 	"initrd_high=0xcfffffff\0"      \
331 	"fdt_high=0xcfffffff\0"
332 
333 /*
334  * Miscellaneous configurable options
335  */
336 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
337 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
338 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
339 #define CONFIG_AUTO_COMPLETE
340 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
341 #define CONFIG_SYS_PBSIZE		\
342 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
343 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
344 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
345 
346 #define CONFIG_CMD_ENV_EXISTS
347 #define CONFIG_CMD_GREPENV
348 #define CONFIG_CMD_MEMINFO
349 #define CONFIG_CMD_MEMTEST
350 #define CONFIG_SYS_MEMTEST_START	0x80000000
351 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
352 
353 #define CONFIG_SYS_LOAD_ADDR		0x82000000
354 
355 #define CONFIG_LS102XA_STREAM_ID
356 
357 /*
358  * Stack sizes
359  * The stack sizes are set up in start.S using the settings below
360  */
361 #define CONFIG_STACKSIZE		(30 * 1024)
362 
363 #define CONFIG_SYS_INIT_SP_OFFSET \
364 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
365 #define CONFIG_SYS_INIT_SP_ADDR \
366 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
367 
368 #ifdef CONFIG_SPL_BUILD
369 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
370 #else
371 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
372 #endif
373 
374 #define CONFIG_SYS_QE_FW_ADDR     0x67f40000
375 
376 /*
377  * Environment
378  */
379 #define CONFIG_ENV_OVERWRITE
380 
381 #if defined(CONFIG_SD_BOOT)
382 #define CONFIG_ENV_OFFSET		0x100000
383 #define CONFIG_ENV_IS_IN_MMC
384 #define CONFIG_SYS_MMC_ENV_DEV		0
385 #define CONFIG_ENV_SIZE			0x20000
386 #elif defined(CONFIG_QSPI_BOOT)
387 #define CONFIG_ENV_IS_IN_SPI_FLASH
388 #define CONFIG_ENV_SIZE			0x2000
389 #define CONFIG_ENV_OFFSET		0x100000
390 #define CONFIG_ENV_SECT_SIZE		0x10000
391 #else
392 #define CONFIG_ENV_IS_IN_FLASH
393 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
394 #define CONFIG_ENV_SIZE			0x20000
395 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
396 #endif
397 
398 #define CONFIG_OF_LIBFDT
399 #define CONFIG_OF_BOARD_SETUP
400 #define CONFIG_CMD_BOOTZ
401 
402 #define CONFIG_MISC_INIT_R
403 
404 /* Hash command with SHA acceleration supported in hardware */
405 #define CONFIG_CMD_HASH
406 #define CONFIG_SHA_HW_ACCEL
407 
408 #ifdef CONFIG_SECURE_BOOT
409 #define CONFIG_CMD_BLOB
410 #endif
411 
412 #endif
413