1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #include <config_cmd_default.h> 11 12 #define CONFIG_LS102XA 13 14 #define CONFIG_SYS_GENERIC_BOARD 15 16 #define CONFIG_DISPLAY_CPUINFO 17 #define CONFIG_DISPLAY_BOARDINFO 18 19 #define CONFIG_SKIP_LOWLEVEL_INIT 20 #define CONFIG_BOARD_EARLY_INIT_F 21 22 /* 23 * Size of malloc() pool 24 */ 25 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 26 27 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 28 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 29 30 /* 31 * Generic Timer Definitions 32 */ 33 #define GENERIC_TIMER_CLK 12500000 34 35 #define CONFIG_SYS_CLK_FREQ 100000000 36 #define CONFIG_DDR_CLK_FREQ 100000000 37 38 #ifndef CONFIG_SYS_TEXT_BASE 39 #define CONFIG_SYS_TEXT_BASE 0x67f80000 40 #endif 41 42 #define CONFIG_NR_DRAM_BANKS 1 43 #define PHYS_SDRAM 0x80000000 44 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 45 46 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 47 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 48 49 #define CONFIG_SYS_HAS_SERDES 50 51 #define CONFIG_FSL_CAAM /* Enable CAAM */ 52 53 #if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) 54 #define CONFIG_U_QE 55 #endif 56 57 /* 58 * IFC Definitions 59 */ 60 #define CONFIG_FSL_IFC 61 #define CONFIG_SYS_FLASH_BASE 0x60000000 62 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 63 64 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 65 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 66 CSPR_PORT_SIZE_16 | \ 67 CSPR_MSEL_NOR | \ 68 CSPR_V) 69 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 70 71 /* NOR Flash Timing Params */ 72 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 73 CSOR_NOR_TRHZ_80) 74 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 75 FTIM0_NOR_TEADC(0x5) | \ 76 FTIM0_NOR_TAVDS(0x0) | \ 77 FTIM0_NOR_TEAHC(0x5)) 78 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 79 FTIM1_NOR_TRAD_NOR(0x1A) | \ 80 FTIM1_NOR_TSEQRAD_NOR(0x13)) 81 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 82 FTIM2_NOR_TCH(0x4) | \ 83 FTIM2_NOR_TWP(0x1c) | \ 84 FTIM2_NOR_TWPH(0x0e)) 85 #define CONFIG_SYS_NOR_FTIM3 0 86 87 #define CONFIG_FLASH_CFI_DRIVER 88 #define CONFIG_SYS_FLASH_CFI 89 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 90 #define CONFIG_SYS_FLASH_QUIET_TEST 91 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 92 93 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 94 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 95 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 96 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 97 98 #define CONFIG_SYS_FLASH_EMPTY_INFO 99 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 100 101 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 102 #define CONFIG_SYS_WRITE_SWAPPED_DATA 103 104 /* CPLD */ 105 106 #define CONFIG_SYS_CPLD_BASE 0x7fb00000 107 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 108 109 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 110 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ 111 CSPR_PORT_SIZE_8 | \ 112 CSPR_MSEL_GPCM | \ 113 CSPR_V) 114 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 115 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 116 CSOR_NOR_NOR_MODE_AVD_NOR | \ 117 CSOR_NOR_TRHZ_80) 118 119 /* CPLD Timing parameters for IFC GPCM */ 120 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ 121 FTIM0_GPCM_TEADC(0xf) | \ 122 FTIM0_GPCM_TEAHC(0xf)) 123 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 124 FTIM1_GPCM_TRAD(0x3f)) 125 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 126 FTIM2_GPCM_TCH(0xf) | \ 127 FTIM2_GPCM_TWP(0xff)) 128 #define CONFIG_SYS_FPGA_FTIM3 0x0 129 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 130 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 131 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 132 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 133 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 134 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 135 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 136 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 137 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT 138 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR 139 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK 140 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR 141 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 142 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 143 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 144 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 145 146 /* 147 * Serial Port 148 */ 149 #define CONFIG_CONS_INDEX 1 150 #define CONFIG_SYS_NS16550 151 #define CONFIG_SYS_NS16550_SERIAL 152 #define CONFIG_SYS_NS16550_REG_SIZE 1 153 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 154 155 #define CONFIG_BAUDRATE 115200 156 157 /* 158 * I2C 159 */ 160 #define CONFIG_CMD_I2C 161 #define CONFIG_SYS_I2C 162 #define CONFIG_SYS_I2C_MXC 163 164 /* EEPROM */ 165 #ifndef CONFIG_SD_BOOT 166 #define CONFIG_ID_EEPROM 167 #define CONFIG_SYS_I2C_EEPROM_NXID 168 #define CONFIG_SYS_EEPROM_BUS_NUM 1 169 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 170 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 171 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 172 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 173 #endif 174 175 /* 176 * MMC 177 */ 178 #define CONFIG_MMC 179 #define CONFIG_CMD_MMC 180 #define CONFIG_FSL_ESDHC 181 #define CONFIG_GENERIC_MMC 182 183 /* 184 * Video 185 */ 186 #define CONFIG_FSL_DCU_FB 187 188 #ifdef CONFIG_FSL_DCU_FB 189 #define CONFIG_VIDEO 190 #define CONFIG_CMD_BMP 191 #define CONFIG_CFB_CONSOLE 192 #define CONFIG_VGA_AS_SINGLE_DEVICE 193 #define CONFIG_VIDEO_LOGO 194 #define CONFIG_VIDEO_BMP_LOGO 195 196 #define CONFIG_FSL_DCU_SII9022A 197 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1 198 #define CONFIG_SYS_I2C_DVI_ADDR 0x39 199 #endif 200 201 /* 202 * eTSEC 203 */ 204 #define CONFIG_TSEC_ENET 205 206 #ifdef CONFIG_TSEC_ENET 207 #define CONFIG_MII 208 #define CONFIG_MII_DEFAULT_TSEC 1 209 #define CONFIG_TSEC1 1 210 #define CONFIG_TSEC1_NAME "eTSEC1" 211 #define CONFIG_TSEC2 1 212 #define CONFIG_TSEC2_NAME "eTSEC2" 213 #define CONFIG_TSEC3 1 214 #define CONFIG_TSEC3_NAME "eTSEC3" 215 216 #define TSEC1_PHY_ADDR 2 217 #define TSEC2_PHY_ADDR 0 218 #define TSEC3_PHY_ADDR 1 219 220 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 221 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 222 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 223 224 #define TSEC1_PHYIDX 0 225 #define TSEC2_PHYIDX 0 226 #define TSEC3_PHYIDX 0 227 228 #define CONFIG_ETHPRIME "eTSEC1" 229 230 #define CONFIG_PHY_GIGE 231 #define CONFIG_PHYLIB 232 #define CONFIG_PHY_ATHEROS 233 234 #define CONFIG_HAS_ETH0 235 #define CONFIG_HAS_ETH1 236 #define CONFIG_HAS_ETH2 237 #endif 238 239 #define CONFIG_CMD_PING 240 #define CONFIG_CMD_DHCP 241 #define CONFIG_CMD_MII 242 #define CONFIG_CMD_NET 243 244 #define CONFIG_CMDLINE_TAG 245 #define CONFIG_CMDLINE_EDITING 246 #define CONFIG_CMD_IMLS 247 248 #define CONFIG_HWCONFIG 249 #define HWCONFIG_BUFFER_SIZE 128 250 251 #define CONFIG_BOOTDELAY 3 252 253 #define CONFIG_EXTRA_ENV_SETTINGS \ 254 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 255 "initrd_high=0xcfffffff\0" \ 256 "fdt_high=0xcfffffff\0" 257 258 /* 259 * Miscellaneous configurable options 260 */ 261 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 262 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 263 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 264 #define CONFIG_AUTO_COMPLETE 265 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 266 #define CONFIG_SYS_PBSIZE \ 267 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 268 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 269 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 270 271 #define CONFIG_CMD_ENV_EXISTS 272 #define CONFIG_CMD_GREPENV 273 #define CONFIG_CMD_MEMINFO 274 #define CONFIG_CMD_MEMTEST 275 #define CONFIG_SYS_MEMTEST_START 0x80000000 276 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 277 278 #define CONFIG_SYS_LOAD_ADDR 0x82000000 279 280 /* 281 * Stack sizes 282 * The stack sizes are set up in start.S using the settings below 283 */ 284 #define CONFIG_STACKSIZE (30 * 1024) 285 286 #define CONFIG_SYS_INIT_SP_OFFSET \ 287 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 288 #define CONFIG_SYS_INIT_SP_ADDR \ 289 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 290 291 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 292 293 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 294 295 /* 296 * Environment 297 */ 298 #define CONFIG_ENV_OVERWRITE 299 300 #define CONFIG_ENV_IS_IN_FLASH 301 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 302 #define CONFIG_ENV_SIZE 0x20000 303 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 304 305 #define CONFIG_OF_LIBFDT 306 #define CONFIG_OF_BOARD_SETUP 307 #define CONFIG_CMD_BOOTZ 308 309 #define CONFIG_MISC_INIT_R 310 311 /* Hash command with SHA acceleration supported in hardware */ 312 #define CONFIG_CMD_HASH 313 #define CONFIG_SHA_HW_ACCEL 314 315 #ifdef CONFIG_SECURE_BOOT 316 #define CONFIG_CMD_BLOB 317 #endif 318 319 #endif 320