1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_PSCI_1_0 13 14 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 15 16 #define CONFIG_SYS_FSL_CLK 17 18 #define CONFIG_SKIP_LOWLEVEL_INIT 19 #define CONFIG_BOARD_EARLY_INIT_F 20 #define CONFIG_DEEP_SLEEP 21 22 /* 23 * Size of malloc() pool 24 */ 25 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 26 27 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 28 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 29 30 /* 31 * USB 32 */ 33 34 /* 35 * EHCI Support - disbaled by default as 36 * there is no signal coming out of soc on 37 * this board for this controller. However, 38 * the silicon still has this controller, 39 * and anyone can use this controller by 40 * taking signals out on their board. 41 */ 42 43 /*#define CONFIG_HAS_FSL_DR_USB*/ 44 45 #ifdef CONFIG_HAS_FSL_DR_USB 46 #define CONFIG_USB_EHCI 47 #define CONFIG_USB_EHCI_FSL 48 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 49 #endif 50 51 /* XHCI Support - enabled by default */ 52 #define CONFIG_HAS_FSL_XHCI_USB 53 54 #ifdef CONFIG_HAS_FSL_XHCI_USB 55 #define CONFIG_USB_XHCI_FSL 56 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 57 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 58 #endif 59 60 /* 61 * Generic Timer Definitions 62 */ 63 #define GENERIC_TIMER_CLK 12500000 64 65 #define CONFIG_SYS_CLK_FREQ 100000000 66 #define CONFIG_DDR_CLK_FREQ 100000000 67 68 #define DDR_SDRAM_CFG 0x470c0008 69 #define DDR_CS0_BNDS 0x008000bf 70 #define DDR_CS0_CONFIG 0x80014302 71 #define DDR_TIMING_CFG_0 0x50550004 72 #define DDR_TIMING_CFG_1 0xbcb38c56 73 #define DDR_TIMING_CFG_2 0x0040d120 74 #define DDR_TIMING_CFG_3 0x010e1000 75 #define DDR_TIMING_CFG_4 0x00000001 76 #define DDR_TIMING_CFG_5 0x03401400 77 #define DDR_SDRAM_CFG_2 0x00401010 78 #define DDR_SDRAM_MODE 0x00061c60 79 #define DDR_SDRAM_MODE_2 0x00180000 80 #define DDR_SDRAM_INTERVAL 0x18600618 81 #define DDR_DDR_WRLVL_CNTL 0x8655f605 82 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 83 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 84 #define DDR_DDR_CDR1 0x80040000 85 #define DDR_DDR_CDR2 0x00000001 86 #define DDR_SDRAM_CLK_CNTL 0x02000000 87 #define DDR_DDR_ZQ_CNTL 0x89080600 88 #define DDR_CS0_CONFIG_2 0 89 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 90 #define SDRAM_CFG2_D_INIT 0x00000010 91 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 92 #define SDRAM_CFG2_FRC_SR 0x80000000 93 #define SDRAM_CFG_BI 0x00000001 94 95 #ifdef CONFIG_RAMBOOT_PBL 96 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg 97 #endif 98 99 #ifdef CONFIG_SD_BOOT 100 #ifdef CONFIG_SD_BOOT_QSPI 101 #define CONFIG_SYS_FSL_PBL_RCW \ 102 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg 103 #else 104 #define CONFIG_SYS_FSL_PBL_RCW \ 105 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg 106 #endif 107 #define CONFIG_SPL_FRAMEWORK 108 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 109 110 #ifdef CONFIG_SECURE_BOOT 111 /* 112 * HDR would be appended at end of image and copied to DDR along 113 * with U-Boot image. 114 */ 115 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) 116 #endif /* ifdef CONFIG_SECURE_BOOT */ 117 118 #define CONFIG_SPL_TEXT_BASE 0x10000000 119 #define CONFIG_SPL_MAX_SIZE 0x1a000 120 #define CONFIG_SPL_STACK 0x1001d000 121 #define CONFIG_SPL_PAD_TO 0x1c000 122 #define CONFIG_SYS_TEXT_BASE 0x82000000 123 124 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 125 CONFIG_SYS_MONITOR_LEN) 126 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 127 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 128 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 129 130 #ifdef CONFIG_U_BOOT_HDR_SIZE 131 /* 132 * HDR would be appended at end of image and copied to DDR along 133 * with U-Boot image. Here u-boot max. size is 512K. So if binary 134 * size increases then increase this size in case of secure boot as 135 * it uses raw u-boot image instead of fit image. 136 */ 137 #define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE) 138 #else 139 #define CONFIG_SYS_MONITOR_LEN 0x80000 140 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ 141 #endif 142 143 #ifdef CONFIG_QSPI_BOOT 144 #define CONFIG_SYS_TEXT_BASE 0x40010000 145 #endif 146 147 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 148 #define CONFIG_SYS_NO_FLASH 149 #endif 150 151 #ifndef CONFIG_SYS_TEXT_BASE 152 #define CONFIG_SYS_TEXT_BASE 0x60100000 153 #endif 154 155 #define CONFIG_NR_DRAM_BANKS 1 156 #define PHYS_SDRAM 0x80000000 157 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 158 159 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 160 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 161 162 #define CONFIG_FSL_CAAM /* Enable CAAM */ 163 164 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ 165 !defined(CONFIG_QSPI_BOOT) 166 #define CONFIG_U_QE 167 #endif 168 169 /* 170 * IFC Definitions 171 */ 172 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 173 #define CONFIG_FSL_IFC 174 #define CONFIG_SYS_FLASH_BASE 0x60000000 175 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 176 177 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 178 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 179 CSPR_PORT_SIZE_16 | \ 180 CSPR_MSEL_NOR | \ 181 CSPR_V) 182 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 183 184 /* NOR Flash Timing Params */ 185 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 186 CSOR_NOR_TRHZ_80) 187 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 188 FTIM0_NOR_TEADC(0x5) | \ 189 FTIM0_NOR_TAVDS(0x0) | \ 190 FTIM0_NOR_TEAHC(0x5)) 191 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 192 FTIM1_NOR_TRAD_NOR(0x1A) | \ 193 FTIM1_NOR_TSEQRAD_NOR(0x13)) 194 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 195 FTIM2_NOR_TCH(0x4) | \ 196 FTIM2_NOR_TWP(0x1c) | \ 197 FTIM2_NOR_TWPH(0x0e)) 198 #define CONFIG_SYS_NOR_FTIM3 0 199 200 #define CONFIG_FLASH_CFI_DRIVER 201 #define CONFIG_SYS_FLASH_CFI 202 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 203 #define CONFIG_SYS_FLASH_QUIET_TEST 204 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 205 206 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 207 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 208 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 209 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 210 211 #define CONFIG_SYS_FLASH_EMPTY_INFO 212 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 213 214 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 215 #define CONFIG_SYS_WRITE_SWAPPED_DATA 216 #endif 217 218 /* CPLD */ 219 220 #define CONFIG_SYS_CPLD_BASE 0x7fb00000 221 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 222 223 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 224 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ 225 CSPR_PORT_SIZE_8 | \ 226 CSPR_MSEL_GPCM | \ 227 CSPR_V) 228 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 229 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 230 CSOR_NOR_NOR_MODE_AVD_NOR | \ 231 CSOR_NOR_TRHZ_80) 232 233 /* CPLD Timing parameters for IFC GPCM */ 234 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ 235 FTIM0_GPCM_TEADC(0xf) | \ 236 FTIM0_GPCM_TEAHC(0xf)) 237 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 238 FTIM1_GPCM_TRAD(0x3f)) 239 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 240 FTIM2_GPCM_TCH(0xf) | \ 241 FTIM2_GPCM_TWP(0xff)) 242 #define CONFIG_SYS_FPGA_FTIM3 0x0 243 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 244 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 245 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 246 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 247 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 248 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 249 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 250 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 251 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT 252 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR 253 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK 254 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR 255 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 256 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 257 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 258 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 259 260 /* 261 * Serial Port 262 */ 263 #ifdef CONFIG_LPUART 264 #define CONFIG_LPUART_32B_REG 265 #else 266 #define CONFIG_CONS_INDEX 1 267 #define CONFIG_SYS_NS16550_SERIAL 268 #ifndef CONFIG_DM_SERIAL 269 #define CONFIG_SYS_NS16550_REG_SIZE 1 270 #endif 271 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 272 #endif 273 274 #define CONFIG_BAUDRATE 115200 275 276 /* 277 * I2C 278 */ 279 #define CONFIG_SYS_I2C 280 #define CONFIG_SYS_I2C_MXC 281 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 282 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 283 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 284 285 /* EEPROM */ 286 #define CONFIG_ID_EEPROM 287 #define CONFIG_SYS_I2C_EEPROM_NXID 288 #define CONFIG_SYS_EEPROM_BUS_NUM 1 289 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 290 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 291 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 292 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 293 294 /* 295 * MMC 296 */ 297 #define CONFIG_MMC 298 #define CONFIG_FSL_ESDHC 299 #define CONFIG_GENERIC_MMC 300 301 #define CONFIG_DOS_PARTITION 302 303 /* SPI */ 304 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 305 /* QSPI */ 306 #define QSPI0_AMBA_BASE 0x40000000 307 #define FSL_QSPI_FLASH_SIZE (1 << 24) 308 #define FSL_QSPI_FLASH_NUM 2 309 310 /* DSPI */ 311 #endif 312 313 /* DM SPI */ 314 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 315 #define CONFIG_DM_SPI_FLASH 316 #endif 317 318 /* 319 * Video 320 */ 321 #define CONFIG_FSL_DCU_FB 322 323 #ifdef CONFIG_FSL_DCU_FB 324 #define CONFIG_CMD_BMP 325 #define CONFIG_VIDEO_LOGO 326 #define CONFIG_VIDEO_BMP_LOGO 327 328 #define CONFIG_FSL_DCU_SII9022A 329 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1 330 #define CONFIG_SYS_I2C_DVI_ADDR 0x39 331 #endif 332 333 /* 334 * eTSEC 335 */ 336 #define CONFIG_TSEC_ENET 337 338 #ifdef CONFIG_TSEC_ENET 339 #define CONFIG_MII 340 #define CONFIG_MII_DEFAULT_TSEC 1 341 #define CONFIG_TSEC1 1 342 #define CONFIG_TSEC1_NAME "eTSEC1" 343 #define CONFIG_TSEC2 1 344 #define CONFIG_TSEC2_NAME "eTSEC2" 345 #define CONFIG_TSEC3 1 346 #define CONFIG_TSEC3_NAME "eTSEC3" 347 348 #define TSEC1_PHY_ADDR 2 349 #define TSEC2_PHY_ADDR 0 350 #define TSEC3_PHY_ADDR 1 351 352 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 353 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 354 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 355 356 #define TSEC1_PHYIDX 0 357 #define TSEC2_PHYIDX 0 358 #define TSEC3_PHYIDX 0 359 360 #define CONFIG_ETHPRIME "eTSEC1" 361 362 #define CONFIG_PHY_GIGE 363 #define CONFIG_PHYLIB 364 #define CONFIG_PHY_ATHEROS 365 366 #define CONFIG_HAS_ETH0 367 #define CONFIG_HAS_ETH1 368 #define CONFIG_HAS_ETH2 369 #endif 370 371 /* PCIe */ 372 #define CONFIG_PCIE1 /* PCIE controller 1 */ 373 #define CONFIG_PCIE2 /* PCIE controller 2 */ 374 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ 375 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 376 377 #define CONFIG_SYS_PCI_64BIT 378 379 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 380 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ 381 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 382 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ 383 384 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000 385 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 386 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ 387 388 #define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 389 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 390 #define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ 391 392 #ifdef CONFIG_PCI 393 #define CONFIG_PCI_SCAN_SHOW 394 #define CONFIG_CMD_PCI 395 #endif 396 397 #define CONFIG_CMDLINE_TAG 398 #define CONFIG_CMDLINE_EDITING 399 400 #define CONFIG_PEN_ADDR_BIG_ENDIAN 401 #define CONFIG_LAYERSCAPE_NS_ACCESS 402 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 403 #define CONFIG_TIMER_CLK_FREQ 12500000 404 405 #define CONFIG_HWCONFIG 406 #define HWCONFIG_BUFFER_SIZE 256 407 408 #define CONFIG_FSL_DEVICE_DISABLE 409 410 411 #ifdef CONFIG_LPUART 412 #define CONFIG_EXTRA_ENV_SETTINGS \ 413 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ 414 "initrd_high=0xffffffff\0" \ 415 "fdt_high=0xffffffff\0" 416 #else 417 #define CONFIG_EXTRA_ENV_SETTINGS \ 418 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 419 "initrd_high=0xffffffff\0" \ 420 "fdt_high=0xffffffff\0" 421 #endif 422 423 /* 424 * Miscellaneous configurable options 425 */ 426 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 427 #define CONFIG_AUTO_COMPLETE 428 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 429 #define CONFIG_SYS_PBSIZE \ 430 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 431 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 432 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 433 434 #define CONFIG_SYS_MEMTEST_START 0x80000000 435 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 436 437 #define CONFIG_SYS_LOAD_ADDR 0x82000000 438 439 #define CONFIG_LS102XA_STREAM_ID 440 441 /* 442 * Stack sizes 443 * The stack sizes are set up in start.S using the settings below 444 */ 445 #define CONFIG_STACKSIZE (30 * 1024) 446 447 #define CONFIG_SYS_INIT_SP_OFFSET \ 448 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 449 #define CONFIG_SYS_INIT_SP_ADDR \ 450 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 451 452 #ifdef CONFIG_SPL_BUILD 453 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 454 #else 455 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 456 #endif 457 458 #define CONFIG_SYS_QE_FW_ADDR 0x600c0000 459 460 /* 461 * Environment 462 */ 463 #define CONFIG_ENV_OVERWRITE 464 465 #if defined(CONFIG_SD_BOOT) 466 #define CONFIG_ENV_OFFSET 0x100000 467 #define CONFIG_ENV_IS_IN_MMC 468 #define CONFIG_SYS_MMC_ENV_DEV 0 469 #define CONFIG_ENV_SIZE 0x20000 470 #elif defined(CONFIG_QSPI_BOOT) 471 #define CONFIG_ENV_IS_IN_SPI_FLASH 472 #define CONFIG_ENV_SIZE 0x2000 473 #define CONFIG_ENV_OFFSET 0x100000 474 #define CONFIG_ENV_SECT_SIZE 0x10000 475 #else 476 #define CONFIG_ENV_IS_IN_FLASH 477 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 478 #define CONFIG_ENV_SIZE 0x20000 479 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 480 #endif 481 482 #define CONFIG_MISC_INIT_R 483 484 /* Hash command with SHA acceleration supported in hardware */ 485 #ifdef CONFIG_FSL_CAAM 486 #define CONFIG_CMD_HASH 487 #define CONFIG_SHA_HW_ACCEL 488 #endif 489 490 #include <asm/fsl_secure_boot.h> 491 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 492 493 #endif 494